Exchange Currencies Track Order Guides Telegram bot

Swap Dai (DAI) to Stellar (XLM) with no sign-up

Enter the DAI amount, paste a Stellar G address from your own wallet, then send DAI on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XLM straight to your address.

Swap XLM to DAI instead

Rate
1 DAI ≈ 7.4091 XLM
Network Fee
-
Deposit Fee
-

Enter an address on the Stellar network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

DAI to XLM exchange rate

The DAI to XLM rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several DAI amounts come to in XLM after fees. It is worked out from the page's latest quote and carries that quote's time.

DAI to XLM Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

DAI Arbitrum ERC-20
You get (estimate)
XLM Stellar
740.9118129 XLM
Rate
1 DAI ≈ 7.40912 XLM
Value in USD
≈ $100.44
Network Fee
0.02 XLM

DAI to XLM conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 DAI≈ 740.912 XLM
500 DAI≈ 3,705.47 XLM
1,000 DAI≈ 7,411.16 XLM
5,000 DAI≈ 37,056.7 XLM
10,000 DAI≈ 74,113.6 XLM
50,000 DAI≈ 370,569 XLM
Live Market Snapshot Updated Nov 20, 2026 02:14 UTC
1 DAI price
$1.00
1 XLM price
$0.1356
1 DAI buys
7.40911813 XLM

How to swap DAI to XLM

  1. Copy your XLM address

    Open your Stellar wallet's receive screen and copy the account address that starts with G, from an account that already holds XLM. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the DAI amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XLM estimate under it already has the payout fee taken out.

  3. Send DAI to the deposit address

    Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until XLM arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XLM is in your wallet.

What the DAI to XLM swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Stellar network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending DAI on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the DAI.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XLM you get per DAI drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

DAI to XLM at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Dai (Arbitrum One) (DAI) Stellar (XLM)
Network Arbitrum One Stellar
Type ERC-20 token Native coin
Contract 0xDA1000…000da1 -
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 19, 2026) ≈ 0.02794 DAI ≈ 0.02 XLM
Route Cross-chain: Arbitrum One to Stellar
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026) 0.2095737 DAI
Account / ID Not needed to start a swap

How long the DAI to XLM swap takes

The DAI to XLM swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the Stellar network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the DAI, and the order page moves from waiting to confirming once the deposit is found.

  2. Arbitrum One sequences the deposit

    The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.

  3. Exchange and XLM payout

    The partner swaps the DAI and sends XLM. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout in a closed ledger

    Your wallet shows the XLM once the ledger with the payout closes, usually a few seconds after it is sent, and the payment is final from then on.

Your XLM address for the payout

A Stellar account address starts with G and is 56 characters of capital letters and the digits 2 to 7. The swap form rejected a muxed address (starts with M, 69 characters) and a contract address (starts with C), so paste the G address and enter any memo separately.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. XLM can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • Leaving out the memo of an exchange account: exchanges keep many customers in one Stellar account, and a payment without its memo can be lost or need manual tracing.
  • A new G address that holds no XLM yet: it is not an account until someone funds it, and a plain payment to it fails.

Receiving XLM on Stellar: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerstellar.expert

Send DAI on the right network

On the sending side, send DAI only on Arbitrum One, the network your order page names. DAI sent on another network does not reach the deposit address. DAI exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the XLM arrives

The payout is a Stellar payment, and it is final once the ledger that includes it closes, usually a few seconds after it is sent. Every Stellar account must keep a minimum balance in XLM, two base reserves plus more for each trustline or other entry it holds, and that part of the balance cannot be spent. Validators can vote to change the base reserve. Each later transaction also costs a small fee in XLM.

If the address belongs to an exchange, copy its G address and memo exactly as its Stellar deposit page shows them, and check its minimum deposit; exchanges that pool deposits in one account credit you by the memo. To check the payout yourself, open the payout hash from the order page in a Stellar explorer such as stellar.expert.

If your DAI deposit is slow or stuck

Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.

Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your DAI to XLM swap

Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount, your G address and any memo are visible to anyone on a Stellar explorer such as stellar.expert, and they stay in the ledger's history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your XLM address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for XLM, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

DAI to XLM Frequently Asked Questions

How do I swap DAI to XLM?

Enter the DAI amount and your XLM address in the form at the top, press Exchange Now, and send DAI on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends XLM to your address. No account or email is needed.

How much XLM do I get for 1 DAI?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the DAI to XLM calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does DAI to XLM take?

There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the XLM payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for DAI to XLM?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Dai to Stellar without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap DAI to XLM?

For the payout, only if your XLM address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Why is the XLM I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less DAI arrived than you entered.

How do I swap XLM back to DAI?

Use the XLM to DAI page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send XLM to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps