Swap Ethereum (ETH) to BeFi Labs (BEFI) with no sign-up
Enter the ETH amount, paste an Ethereum address from your own wallet, then send ETH on Starknet to the one-time deposit address on your order page. Once the Starknet network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BEFI on Ethereum straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The ETH to BEFI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several ETH amounts come to in BEFI after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
ETH to BEFI Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ETHStarknet
You get (estimate)
BEFIEthereumERC-20
Rate
1 ETH ≈ 5,878,960 BEFI
Value in USD
≈ $1,666.71
Network Fee
290.8006777 BEFI
ETH to BEFI conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest6,408,686 BEFI
Lowest5,867,243 BEFI
Change, 6 days−5.37%
6,408,6865,867,243Nov 16, 2026Nov 22, 2026
Date
Rate
1 ETH ≈ 6,064,845 BEFI
1 ETH ≈ 5,867,243 BEFI
1 ETH ≈ 6,272,312 BEFI
1 ETH ≈ 6,294,145 BEFI
1 ETH ≈ 6,340,110 BEFI
1 ETH ≈ 6,397,407 BEFI
1 ETH ≈ 6,408,686 BEFI
Live Market SnapshotUpdated Nov 22, 2026 07:53 UTC
1 ETH price
$1,703.56
1 BEFI price
$0.0002835
1 ETH buys
5878959.5574755 BEFI
How to swap ETH to BEFI
1
Copy your BEFI address
Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ETH amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BEFI estimate under it already has the payout fee taken out.
3
Send ETH to the deposit address
Press Exchange Now. Your order page shows a one-time Starknet deposit address: send the amount you entered in one transaction. Send ETH from a wallet that holds it on Starknet and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until BEFI arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BEFI is in your wallet.
What the ETH to BEFI swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the Starknet network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send. For a token, that fee is usually not paid in the token itself, so keep enough of the fee coin in the same wallet next to the ETH.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BEFI you get per ETH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
ETH to BEFI at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethereum (Starknet) (ETH)
BeFi Labs (BEFI)
Network
Starknet
Ethereum
Type
Token
ERC-20 token
Contract
0x049d36…004dc7
0x8b9b95…42bd51
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.000004 ETH
≈ 294.4 BEFI
Route
Cross-chain: Starknet to Ethereum
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0000888 ETH
Account / ID
Not needed to start a swap
How long the ETH to BEFI swap takes
The ETH to BEFI swap is three waits in a row: the Starknet network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. The time Starknet needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.
2Starknet confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and BEFI payout
The partner swaps the ETH and sends BEFI. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Ethereum
Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.
Your BEFI address for the payout
An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for BEFI on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.
On the sending side, send ETH only on Starknet, the network your order page names. ETH sent on another network does not reach the deposit address. ETH exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the BEFI later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.
If the address belongs to an exchange, check that the exchange credits BEFI on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.
If your ETH deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Starknet. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ETH to BEFI swap
Your deposit is recorded on Starknet for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send ETH only on Starknet, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your BEFI address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
ETH to BEFI Frequently Asked Questions
How do I swap ETH to BEFI?
Enter the ETH amount and your BEFI address in the form at the top, press Exchange Now, and send ETH on Starknet to the one-time deposit address on your order page. After the Starknet network confirms the deposit, the exchange partner sends BEFI on Ethereum to your address. No account or email is needed.
How much BEFI do I get for 1 ETH?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH to BEFI calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does ETH to BEFI take?
There is no set time: the Starknet network confirms the deposit first, then the exchange partner swaps it and sends the BEFI payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ETH to BEFI?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethereum to BeFi Labs without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the BEFI I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.
How do I swap BEFI back to ETH?
Use the BEFI to ETH page, linked next to the swap form. It works the same way in reverse: paste a Starknet address, then send BEFI to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.