Exchange Currencies Track Order Guides Telegram bot

Swap Fetch (FET) to Chainlink (LINK) with no sign-up

Enter the FET amount, paste your 0x address on Arbitrum One from your own wallet, then send FET to the one-time deposit address on your order page. Once the Fetch.ai network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LINK on Arbitrum One straight to your address.

Swap LINK to FET instead

Rate
1 FET ā‰ˆ 0.0119733 LINK
Network Fee
-
Deposit Fee
-

Enter an address on the Arbitrum One (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

FET to LINK exchange rate

The FET to LINK rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several FET amounts come to in LINK after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

FET to LINK Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

FET Fetch.ai
You get (estimate)
LINK Arbitrum ERC-20
10.7759841 LINK
Rate
1 FET ā‰ˆ 0.0119733 LINK
Value in USD
ā‰ˆ $97.58
Network Fee
0.003111 LINK

FET to LINK conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000 FETā‰ˆ 11.9737 LINK
5,000 FETā‰ˆ 59.8808 LINK
10,000 FETā‰ˆ 119.765 LINK
50,000 FETā‰ˆ 598.836 LINK
100,000 FETā‰ˆ 1,197.67 LINK

FET to LINK daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.01438 LINK
Lowest0.0126486 LINK
Change, 6 daysāˆ’11.36%
0.01438 0.0126486
Nov 16, 2026Nov 22, 2026
DateRate
1 FET ā‰ˆ 0.0126486 LINK
1 FET ā‰ˆ 0.0132254 LINK
1 FET ā‰ˆ 0.0138914 LINK
1 FET ā‰ˆ 0.0139793 LINK
1 FET ā‰ˆ 0.0141726 LINK
1 FET ā‰ˆ 0.01438 LINK
1 FET ā‰ˆ 0.0142696 LINK
Live Market Snapshot Updated Nov 22, 2026 23:35 UTC
1 FET price
$0.1105
1 LINK price
$9.06
1 FET buys
0.01197332 LINK

How to swap FET to LINK

  1. Copy your LINK address

    Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the FET amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LINK estimate under it already has the payout fee taken out.

  3. Send FET to the deposit address

    Press Exchange Now. Your order page shows a one-time Fetch.ai deposit address: send the amount you entered in one transaction. Send FET from a wallet that holds it on Fetch.ai and also holds enough of the coin the network charges its fee in, usually its own coin. If the order page shows a memo next to the deposit address, add it to your transfer, because a deposit without it cannot be matched to your order.

  4. Follow the order until LINK arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LINK is in your wallet.

What the FET to LINK swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the Fetch.ai network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LINK you get per FET drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

FET to LINK at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Fetch (Mainnet) (FET) Chainlink (Arbitrum One) (LINK)
Network Fetch.ai Arbitrum One
Type Native coin ERC-20 token
Contract - 0xf97f4d…539FB4
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) None listed ā‰ˆ 0.003132 LINK
Route Cross-chain: Fetch.ai to Arbitrum One
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.555899 FET
Account / ID Not needed to start a swap

How long the FET to LINK swap takes

The FET to LINK swap is three waits in a row: the Fetch.ai network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. The time Fetch.ai needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the FET, and the order page moves from waiting to confirming once the deposit is found.

  2. Fetch.ai confirms the deposit

    When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.

  3. Exchange and LINK payout

    The partner swaps the FET and sends LINK. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Arbitrum One

    Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.

Your LINK address for the payout

Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
  • An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving LINK on Arbitrum One: address and memo

Memo or tagNot used on this network.
Block explorerarbiscan.io

More about swapping on Arbitrum One

Which network your LINK arrives on

This page pays LINK on Arbitrum One. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send FET only on Fetch.ai, the network your order page names. FET sent on another network does not reach the deposit address.

After the LINK arrives

The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the LINK only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.

If your FET deposit is slow or stuck

Look up the transaction ID from your wallet in a block explorer for Fetch.ai. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your FET to LINK swap

Your deposit is recorded on Fetch.ai for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send FET only on Fetch.ai, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
  • Copy your LINK address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

FET to LINK Frequently Asked Questions

How do I swap FET to LINK?

Enter the FET amount and your LINK address in the form at the top, press Exchange Now, and send FET to the one-time deposit address on your order page. After the Fetch.ai network confirms the deposit, the exchange partner sends LINK on Arbitrum One to your address. No account or email is needed.

How much LINK do I get for 1 FET?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the FET to LINK calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does FET to LINK take?

There is no set time: the Fetch.ai network confirms the deposit first, then the exchange partner swaps it and sends the LINK payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for FET to LINK?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Fetch to Chainlink without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap FET to LINK?

For the deposit, only if the order page shows a memo next to the deposit address: your FET must then carry it to be matched to your order.

Can I receive LINK on another network?

Yes, through a different entry in the coin list, since this page pays LINK on Arbitrum One. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the LINK I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less FET arrived than you entered.

How do I swap LINK back to FET?

Use the LINK to FET page, linked next to the swap form. It works the same way in reverse: paste a Fetch.ai address, then send LINK to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps