Swap Fetch (FET) to Litecoin (LTC) with no sign-up
Enter the FET amount, paste a BNB Smart Chain address from your own wallet, then send FET to the one-time deposit address on your order page. Once the Fetch.ai network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LTC on BNB Smart Chain straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The FET to LTC rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several FET amounts come to in LTC after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
FET to LTC Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
FETFetch.ai
You get (estimate)
LTCBNB ChainBEP-20
Rate
1 FET ≈ 0.00265461 LTC
Value in USD
≈ $99.07
Network Fee
0.0000724 LTC
FET to LTC conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 17, 2026 to Nov 22, 2026.
Highest0.00294788 LTC
Lowest0.00271181 LTC
Change, 5 days−7.41%
Date
Rate
1 FET ≈ 0.00271181 LTC
1 FET ≈ 0.00276968 LTC
1 FET ≈ 0.00294788 LTC
1 FET ≈ 0.00287509 LTC
1 FET ≈ 0.00290954 LTC
1 FET ≈ 0.00292871 LTC
Live Market SnapshotUpdated Nov 22, 2026 16:50 UTC
1 FET price
$0.1115
1 LTC price
$41.47
1 FET buys
0.00265461 LTC
How to swap FET to LTC
1
Copy your LTC address
Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the FET amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LTC estimate under it already has the payout fee taken out.
3
Send FET to the deposit address
Press Exchange Now. Your order page shows a one-time Fetch.ai deposit address: send the amount you entered in one transaction. Send FET from a wallet that holds it on Fetch.ai and also holds enough of the coin the network charges its fee in, usually its own coin. If the order page shows a memo next to the deposit address, add it to your transfer, because a deposit without it cannot be matched to your order.
4
Follow the order until LTC arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LTC is in your wallet.
What the FET to LTC swap costs
Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the Fetch.ai network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LTC you get per FET drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
FET to LTC at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Fetch (Mainnet) (FET)
Litecoin (Binance Smart Chain) (LTC)
Network
Fetch.ai
BNB Smart Chain
Type
Native coin
BEP-20 token
Contract
-
0x433866…b0db94
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 22, 2026)
None listed
≈ 0.0000717 LTC
Route
Cross-chain: Fetch.ai to BNB Smart Chain
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.058526 FET
Account / ID
Not needed to start a swap
How long the FET to LTC swap takes
The FET to LTC swap is three waits in a row: the Fetch.ai network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. The time Fetch.ai needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the FET, and the order page moves from waiting to confirming once the deposit is found.
2Fetch.ai confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and LTC payout
The partner swaps the FET and sends LTC. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on BNB Smart Chain
Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.
Your LTC address for the payout
BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for LTC on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.
Receiving LTC on BNB Smart Chain: address and memo
This page pays LTC on BNB Smart Chain. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send FET only on Fetch.ai, the network your order page names. FET sent on another network does not reach the deposit address.
The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the LTC later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this LTC stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.
If the address belongs to an exchange, check that the exchange credits LTC on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.
If your FET deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Fetch.ai. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your FET to LTC swap
Your deposit is recorded on Fetch.ai for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send FET only on Fetch.ai, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your LTC address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
FET to LTC Frequently Asked Questions
How do I swap FET to LTC?
Enter the FET amount and your LTC address in the form at the top, press Exchange Now, and send FET to the one-time deposit address on your order page. After the Fetch.ai network confirms the deposit, the exchange partner sends LTC on BNB Smart Chain to your address. No account or email is needed.
How much LTC do I get for 1 FET?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the FET to LTC calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does FET to LTC take?
There is no set time: the Fetch.ai network confirms the deposit first, then the exchange partner swaps it and sends the LTC payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for FET to LTC?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Fetch to Litecoin without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap FET to LTC?
For the deposit, only if the order page shows a memo next to the deposit address: your FET must then carry it to be matched to your order.
Can I receive LTC on another network?
Yes, through a different entry in the coin list, since this page pays LTC on BNB Smart Chain. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the LTC I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less FET arrived than you entered.
How do I swap LTC back to FET?
Use the LTC to FET page, linked next to the swap form. It works the same way in reverse: paste a Fetch.ai address, then send LTC to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.