Exchange Currencies Track Order Guides Telegram bot

Swap JOE to Monero (XMR) with no sign-up

Enter the JOE amount, paste a Monero address from your own wallet, then send JOE on the Avalanche C-Chain to the one-time deposit address on your order page. Once the Avalanche C-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XMR straight to your address.

Swap XMR to JOE instead

Network Fee
-
Deposit Fee
-

Enter an address on the Monero network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

JOE to XMR exchange rate

The JOE to XMR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

JOE to XMR Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

JOE Avalanche ARC-20
You get (estimate)
XMR Monero
0
Rate
-
Value in USD
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 11:22 UTC
1 XMR price
$502.11

How to swap JOE to XMR

  1. Copy your XMR address

    Open your Monero wallet's Receive screen and copy a subaddress, which starts with 8; the primary address, starting with 4, works too, and both are 95 characters long. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the JOE amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XMR estimate under it already has the payout fee taken out.

  3. Send JOE to the deposit address

    Press Exchange Now. Your order page shows a one-time Avalanche C-Chain deposit address: send the amount you entered in one transaction. Send from a wallet set to the Avalanche C-Chain that holds enough AVAX on the C-Chain for gas; AVAX on the X-Chain or P-Chain cannot pay it.

  4. Follow the order until XMR arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XMR is in your wallet.

What the JOE to XMR swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Monero network fee for your payout. You pay the C-Chain gas fee yourself, in AVAX: the gas charged, which is at least half the gas limit your wallet sets, times the base fee plus a tip, and both are burned. A token transfer runs the token's contract, so it uses more gas than a plain AVAX transfer, and that gas is paid in AVAX on the C-Chain.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XMR you get per JOE drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

JOE to XMR at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset JOE Monero (XMR)
Network Avalanche C-Chain Monero
Type ARC-20 token Native coin
Contract 0x6e84a6…bC0fDd -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) - ≈ 0.009 XMR
Route Cross-chain: Avalanche C-Chain to Monero
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 28.1522648 JOE
Account / ID Not needed to start a swap

How long the JOE to XMR swap takes

The JOE to XMR swap is three waits in a row: the Avalanche C-Chain network confirms your deposit, the exchange partner swaps it, and the Monero network delivers the payout. A C-Chain transaction is final once Avalanche consensus accepts its block, in about a second, and accepted blocks are never reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the JOE, and the order page moves from waiting to confirming once the deposit is found.

  2. C-Chain consensus accepts the block

    An accepted block is final. The node executes it after acceptance, so receipts and new balances appear once that is done.

  3. Exchange and XMR payout

    The partner swaps the JOE and sends XMR. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. The 10-block lock ends

    Once the payout is in a block, a synced wallet lists it as locked. After 10 blocks, about 20 minutes on average, the XMR counts as spendable balance.

Your XMR address for the payout

A Monero standard address is 95 characters and starts with 4. A subaddress is also 95 characters and starts with 8. An integrated address is 106 characters, starts with 4 and has a payment ID built in. The swap form accepted all three types in our checks.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • Using an exchange address that needs a separate payment ID, which this form cannot pass on.
  • Paying out to a new Monero wallet before writing down its seed phrase: without it, the XMR cannot be restored if the device or wallet file is lost.

Receiving XMR on Monero: address and memo

Memo or tagNot used on this network.
Block explorerxmrchain.net

After the XMR arrives

Monero locks every received output for 10 blocks after the transaction is mined, about 20 minutes on average, and your wallet shows the amount as locked until then. It is a consensus rule of the network, not a hold by the swap, and it applies again to your change whenever you send XMR later.

A wallet that scans the chain on your device finds the payout once it is open and has synced past the payout block. If you restored the wallet from its seed, its restore height must be below the payout block, or the wallet skips the transaction. A block explorer cannot show your balance, because the payout goes to a one-time stealth address and the amount is hidden.

Use an exchange address only if that exchange still accepts XMR deposits in your region and gives you one complete address; if it asks for a separate payment ID next to a normal address, use your own wallet instead. To check the payout yourself, open the payout hash from the order page in a Monero explorer such as xmrchain.net.

If your JOE deposit is slow or stuck

Look up the transaction hash on Snowtrace. A deposit that stays pending usually has a max fee below the base fee bound of the next block, which rises while the C-Chain is busier than its target, or it waits behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Snowtrace marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your JOE to XMR swap

Your deposit is public on the Avalanche C-Chain: your sending address, the deposit address, the amount and the fee show on Snowtrace, and they stay there. On Monero, outside observers cannot read the payout amount or your receiving address; the chain still shows that a transaction exists, with its block and fee. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • If your AVAX sits on the X-Chain or P-Chain, move it to the C-Chain in your wallet first, because only C-Chain AVAX pays C-Chain gas.
  • Copy your XMR address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

JOE to XMR Frequently Asked Questions

How do I swap JOE to XMR?

Enter the JOE amount and your XMR address in the form at the top, press Exchange Now, and send JOE on the Avalanche C-Chain to the one-time deposit address on your order page. After the Avalanche C-Chain network confirms the deposit, the exchange partner sends XMR to your address. No account or email is needed.

How much XMR do I get for 1 JOE?

Type 1 into the JOE to XMR calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does JOE to XMR take?

There is no set time: the Avalanche C-Chain network confirms the deposit first, then the exchange partner swaps it and sends the XMR payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for JOE to XMR?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap JOE to Monero without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the XMR I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less JOE arrived than you entered.

How do I swap XMR back to JOE?

Use the XMR to JOE page, linked next to the swap form. It works the same way in reverse: paste an Avalanche C-Chain address, then send XMR to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps