Enter the XMR amount, paste an Avalanche C-Chain address from your own wallet, then send XMR to the one-time deposit address on your order page. Once the Monero network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends JOE on the Avalanche C-Chain straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The XMR to JOE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
XMR to JOE Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
XMRMonero
You get (estimate)
JOEAvalancheARC-20
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 11:31 UTC
1 XMR price
$500.91
How to swap XMR to JOE
1
Copy your JOE address
Open your wallet's C-Chain account, not its X-Chain or P-Chain one, and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the XMR amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The JOE estimate under it already has the payout fee taken out.
3
Send XMR to the deposit address
Press Exchange Now. Your order page shows a one-time Monero deposit address: send the amount you entered in one transaction. Send from a fully synced Monero wallet and type the amount yourself instead of using the All or Max button, which takes the fee out of the amount.
4
Follow the order until JOE arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the JOE is in your wallet.
What the XMR to JOE swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Avalanche C-Chain network fee for your payout. Your Monero wallet adds the network fee on top of the amount and works it out for you: fees are dynamic, priced per byte, and higher at a higher priority setting.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the JOE you get per XMR drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
XMR to JOE at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Monero (XMR)
JOE
Network
Monero
Avalanche C-Chain
Type
Native coin
ARC-20 token
Contract
-
0x6e84a6…bC0fDd
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.006 XMR
-
Route
Cross-chain: Monero to Avalanche C-Chain
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.011025 XMR
Account / ID
Not needed to start a swap
How long the XMR to JOE swap takes
The XMR to JOE swap is three waits in a row: the Monero network confirms your deposit, the exchange partner swaps it, and the Avalanche C-Chain network delivers the payout. Monero targets a block about every two minutes, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the XMR, and the order page moves from waiting to confirming once the deposit is found.
2Monero confirms the deposit
Your wallet lists the deposit as pending until a miner includes it in a block, and each block after that adds a confirmation.
3Exchange and JOE payout
The partner swaps the XMR and sends JOE. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on the C-Chain
The block is final as soon as consensus accepts it, and your wallet shows the payout once the node has executed it.
Your JOE address for the payout
C-Chain addresses use the Ethereum format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. X-Chain addresses look different (X-avax1 followed by a bech32 string), and P-Chain addresses start with P-avax1. An 0x address cannot receive X-Chain AVAX.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for JOE on another network: the 0x address can look the same, but the exchange may not credit a C-Chain payout.
A token contract address copied from Snowtrace instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on the Avalanche C-Chain, where a payout stays stuck unless the wallet can be recreated there.
Receiving JOE on Avalanche C-Chain: address and memo
The payout is final once Avalanche consensus accepts its block, and accepted blocks are never reorganized. Your wallet shows the new balance after the node has executed that block. You need no AVAX to receive the payout, because the sender pays the gas. Moving the JOE later costs gas paid in AVAX on the C-Chain, so keep some AVAX at that address. If the token does not show in your wallet, add it by its contract address.
If the address belongs to an exchange, check that the exchange credits JOE on the Avalanche C-Chain at that address and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Avalanche C-Chain explorer such as Snowtrace.
If your XMR deposit is slow or stuck
Look up your transaction ID on a Monero block explorer such as xmrchain.net. If it is still not there after a few minutes, the node your wallet uses probably failed to relay it: broadcast that same transaction again if your wallet offers that, through another node if needed, rather than creating a new one. The network rejects a second spend of the same coins, so this cannot pay twice. If the explorer shows it, wait for a block. If the wallet will not send at all, check its unlocked balance, since newly received coins and the change from your last send stay locked for 10 blocks.
A Monero explorer cannot show who received a payment or how much, so a transaction ID alone does not prove your deposit; the transaction ID, the transaction key and the deposit address together do. In the GUI wallet the key sits behind the P button on the History page; in the CLI, get_tx_key returns it if the wallet stores transaction keys.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your XMR to JOE swap
On the Monero chain, outside observers cannot read your deposit amount or the receiving address, and your real input appears alongside 15 decoys; that a transaction exists, its block and its fee stay public. The payout, its amount and your 0x address are public on Snowtrace, and so is everything that address does later on the C-Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Wait until your Monero wallet shows the full amount plus the network fee as unlocked before you create the order.
Copy your JOE address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
XMR to JOE Frequently Asked Questions
How do I swap XMR to JOE?
Enter the XMR amount and your JOE address in the form at the top, press Exchange Now, and send XMR to the one-time deposit address on your order page. After the Monero network confirms the deposit, the exchange partner sends JOE on the Avalanche C-Chain to your address. No account or email is needed.
How much JOE do I get for 1 XMR?
Type 1 into the XMR to JOE calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does XMR to JOE take?
There is no set time: the Monero network confirms the deposit first, then the exchange partner swaps it and sends the JOE payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for XMR to JOE?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Monero to JOE without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the JOE I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XMR arrived than you entered.
How do I swap JOE back to XMR?
Use the JOE to XMR page, linked next to the swap form. It works the same way in reverse: paste a Monero address, then send JOE to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.