Swap Solayer (LAYER) to Tether (USDT) with no sign-up
Enter the LAYER amount, paste a Solana wallet address from your own wallet, then send LAYER on Solana to the one-time deposit address on your order page. Once the Solana network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends USDT on Solana straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The LAYER to USDT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
LAYER to USDT Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
LAYERSolanaSPL
You get (estimate)
USDTSolanaSPL
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 06:58 UTC
1 USDT price
$1.00
How to swap LAYER to USDT
1
Copy your USDT address
Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.
2
Enter the LAYER amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The USDT estimate under it already has the payout fee taken out.
3
Send LAYER to the deposit address
Press Exchange Now. Your order page shows a one-time Solana deposit address: send the amount you entered in one transaction. Send from any Solana wallet and copy the transaction signature, Solana's name for the transaction ID, so you can look the deposit up later.
4
Follow the order until USDT arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the USDT is in your wallet.
What the LAYER to USDT swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. The Solana network fee is paid in SOL, normally by the sending wallet: a base charge per signature plus any priority fee, charged even if the transaction fails and not tied to the amount. If the deposit address has never held LAYER, your wallet must create its token account in the same transaction, which costs extra SOL as rent that you do not get back.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the USDT you get per LAYER drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
LAYER to USDT at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Solayer (LAYER)
Tether (SOL) (USDT)
Network
Solana
Solana
Type
SPL token
SPL token
Contract
LAYER4xP…wY2Yzc
Es9vMFrz…enwNYB
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
-
≈ 0.1811 USDT
Route
Same network (Solana)
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
8.420262 LAYER
Account / ID
Not needed to start a swap
How long the LAYER to USDT swap takes
The LAYER to USDT swap is three waits in a row, all on Solana: the network confirms your deposit, the exchange partner swaps it, and a second Solana transaction delivers the payout. Solana produces blocks in slots of about 200 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the LAYER, and the order page moves from waiting to confirming once the deposit is found.
2Solana finalizes the deposit
Once a block includes the deposit, Solana's Alpenglow consensus targets finality in roughly 150 milliseconds. A transaction that misses its blockhash window expires instead of waiting.
3Exchange and USDT payout
The partner swaps the LAYER and sends USDT. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Solana
Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the USDT under your address.
Your USDT address for the payout
A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.
This page pays USDT on Solana. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. USDT arrives in a token account tied to your wallet address; if you have never held USDT, the payout has to create that account, and your wallet needs no SOL to receive it.
If the address belongs to an exchange, check that it is the exchange's deposit address for USDT on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.
If your LAYER deposit is slow or stuck
Look up the transaction signature on a Solana explorer such as Solscan. By default, a Solana transaction expires if no block includes it within 150 blocks of the blockhash it was signed with, about 30 seconds at the current 200-millisecond slots, and after that it can never be processed.
A transaction the explorer marks as failed moved no coins but still cost its fee, and it stays failed. Send again only once the first attempt shows as failed, or has expired without your balance dropping; while it may still land, a second send could become a second deposit. A signed transaction's fee cannot be raised, so when blocks are busy, give the new attempt a higher priority fee, if your wallet lets you set one.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your LAYER to USDT swap
Your deposit is public on Solana: anyone can look up the sending wallet, the deposit address, the amount and the fee in an explorer such as Solscan. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Check that the sending wallet holds SOL for the fee besides the LAYER you send, before you create the order.
Copy your USDT address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
LAYER to USDT Frequently Asked Questions
How do I swap LAYER to USDT?
Enter the LAYER amount and your USDT address in the form at the top, press Exchange Now, and send LAYER on Solana to the one-time deposit address on your order page. After the Solana network confirms the deposit, the exchange partner sends USDT on Solana to your address. No account or email is needed.
How much USDT do I get for 1 LAYER?
Type 1 into the LAYER to USDT calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does LAYER to USDT take?
There is no set time: the Solana network confirms the deposit first, then the exchange partner swaps it and sends the USDT payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for LAYER to USDT?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Solayer to Tether without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Can I receive USDT on another network?
Yes, through a different entry in the coin list, since this page pays USDT on Solana. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the USDT I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LAYER arrived than you entered.
How do I swap USDT back to LAYER?
Use the USDT to LAYER page, linked next to the swap form. It works the same way in reverse: paste a Solana address, then send USDT to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.