Exchange Currencies Track Order Guides Telegram bot

Swap Chainlink (LINK) to Stacks (STX) with no sign-up

Enter the LINK amount, paste your Stacks address from your own wallet, then send LINK on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends STX straight to your address.

Swap STX to LINK instead

Rate
1 LINK ā‰ˆ 33.4664 STX
Network Fee
-
Deposit Fee
-

Enter an address on the Stacks network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LINK to STX exchange rate

The LINK to STX rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LINK amounts come to in STX after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

LINK to STX Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LINK Arbitrum ERC-20
You get (estimate)
STX Stacks
334.664199 STX
Rate
1 LINK ā‰ˆ 33.4664 STX
Value in USD
ā‰ˆ $88.17
Network Fee
0.0005 STX

LINK to STX conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 LINKā‰ˆ 334.664 STX
50 LINKā‰ˆ 1,673.74 STX
100 LINKā‰ˆ 3,347.59 STX
500 LINKā‰ˆ 16,738.3 STX
1,000 LINKā‰ˆ 33,476.8 STX
5,000 LINKā‰ˆ 167,384 STX

LINK to STX daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest34.8604 STX
Lowest33.2788 STX
Change, 6 daysāˆ’0.73%
34.8604 33.2788
Nov 16, 2026Nov 22, 2026
DateRate
1 LINK ā‰ˆ 34.1316 STX
1 LINK ā‰ˆ 34.8604 STX
1 LINK ā‰ˆ 34.16 STX
1 LINK ā‰ˆ 33.6655 STX
1 LINK ā‰ˆ 33.2788 STX
1 LINK ā‰ˆ 34.8386 STX
1 LINK ā‰ˆ 34.3842 STX
Live Market Snapshot Updated Nov 22, 2026 23:49 UTC
1 LINK price
$9.06
1 STX price
$0.2635
1 LINK buys
33.4664199 STX

How to swap LINK to STX

  1. Copy your STX address

    Open your wallet's receive screen for STX on Stacks and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the LINK amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The STX estimate under it already has the payout fee taken out.

  3. Send LINK to the deposit address

    Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until STX arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the STX is in your wallet.

What the LINK to STX swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Stacks network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending LINK on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the LINK.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the STX you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LINK to STX at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Chainlink (Arbitrum One) (LINK) Stacks (STX)
Network Arbitrum One Stacks
Type ERC-20 token Native coin
Contract 0xf97f4d…539FB4 -
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 22, 2026) ā‰ˆ 0.003132 LINK ā‰ˆ 0.0005 STX
Route Cross-chain: Arbitrum One to Stacks
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0068987 LINK
Account / ID Not needed to start a swap

How long the LINK to STX swap takes

The LINK to STX swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the Stacks network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.

  2. Arbitrum One sequences the deposit

    The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.

  3. Exchange and STX payout

    The partner swaps the LINK and sends STX. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Stacks

    Your wallet lists the STX as received once Stacks has confirmed the payout.

Your STX address for the payout

A Stacks mainnet address starts with SP (single signature) or SM (multisig) and is usually 40 or 41 letters and digits; the swap form accepts both. Addresses starting with ST or SN are testnet addresses, and the swap form rejects Bitcoin addresses, including the ones your Stacks wallet shows.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. STX can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • An address for STX on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving STX on Stacks: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerexplorer.hiro.so

Send LINK on the right network

On the sending side, send LINK only on Arbitrum One, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the STX arrives

The payout is an ordinary Stacks transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Stacks and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts STX on Stacks, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Stacks block explorer.

If your LINK deposit is slow or stuck

Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.

Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LINK to STX swap

Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout is recorded on Stacks too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your STX address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for STX, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

LINK to STX Frequently Asked Questions

How do I swap LINK to STX?

Enter the LINK amount and your STX address in the form at the top, press Exchange Now, and send LINK on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends STX to your address. No account or email is needed.

How much STX do I get for 1 LINK?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LINK to STX calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LINK to STX take?

There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the STX payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LINK to STX?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Chainlink to Stacks without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap LINK to STX?

For the payout, only if your STX address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Why is the STX I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.

How do I swap STX back to LINK?

Use the STX to LINK page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send STX to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps