Exchange Currencies Track Order Guides Telegram bot

Swap Chainlink (LINK) to USD Coin Bridged (ARBUSDCE) with no sign-up

Enter the LINK amount, paste your 0x address on Arbitrum One from your own wallet, then send LINK on Polygon PoS to the one-time deposit address on your order page. Once the Polygon PoS network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ARBUSDCE on Arbitrum One straight to your address.

Swap ARBUSDCE to LINK instead

Rate
1 LINK ≈ 8.5861 ARBUSDCE
Network Fee
-
Deposit Fee
-

Enter an address on the Arbitrum One (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LINK to ARBUSDCE exchange rate

The LINK to ARBUSDCE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LINK amounts come to in ARBUSDCE after fees. It is worked out from the page's latest quote and carries that quote's time.

LINK to ARBUSDCE Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LINK Polygon ERC-20
You get (estimate)
ARBUSDCE Arbitrum ERC-20
85.860743 ARBUSDCE
Rate
1 LINK ≈ 8.58607 ARBUSDCE
Value in USD
≈ $88.19
Network Fee
0.0205707 ARBUSDCE

LINK to ARBUSDCE conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 LINK≈ 85.8607 ARBUSDCE
50 LINK≈ 429.435 ARBUSDCE
100 LINK≈ 858.903 ARBUSDCE
500 LINK≈ 4,294.65 ARBUSDCE
1,000 LINK≈ 8,589.33 ARBUSDCE
5,000 LINK≈ 42,946.8 ARBUSDCE
Live Market Snapshot Updated Nov 22, 2026 23:49 UTC
1 LINK price
$9.16
1 ARBUSDCE price
$1.03
1 LINK buys
8.5860743 ARBUSDCE

LINK to ARBUSDCE market price range

Over the last 30 days, 1 LINK was worth between 10.585 and 13.334 ARBUSDCE at market prices.

Oct 8, 2026Low 10.585 · High 13.334 ARBUSDCENov 6, 2026

Market price of 1 LINK in ARBUSDCE over the last 30 days

Based on daily market prices, checked on Nov 7, 2026. This is not your swap rate: the estimate in the swap form includes fees and moves with the market.

How to swap LINK to ARBUSDCE

  1. Copy your ARBUSDCE address

    Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LINK amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ARBUSDCE estimate under it already has the payout fee taken out.

  3. Send LINK to the deposit address

    Press Exchange Now. Your order page shows a one-time Polygon PoS deposit address: send the amount you entered in one transaction. Send from a wallet set to Polygon PoS that holds enough POL for gas; some wallets still label that balance MATIC.

  4. Follow the order until ARBUSDCE arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ARBUSDCE is in your wallet.

What the LINK to ARBUSDCE swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the Polygon PoS gas fee yourself, in POL: the gas the transfer uses times the base fee plus a tip, and most wallets suggest both. A token transfer on Polygon PoS runs the token's contract, so it uses more gas than a plain POL transfer, and that gas is paid in POL.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ARBUSDCE you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LINK to ARBUSDCE at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Chainlink (Polygon) (LINK) USD Coin Bridged (Arbitrum One) (ARBUSDCE)
Network Polygon PoS Arbitrum One
Type ERC-20 token ERC-20 token
Contract 0x53E0bc…aBad39 0xFF970A…DB5CC8
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.001443 LINK ≈ 0.02004 ARBUSDCE
Route Cross-chain: Polygon PoS to Arbitrum One
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0082832 LINK
Account / ID Not needed to start a swap

How long the LINK to ARBUSDCE swap takes

The LINK to ARBUSDCE swap is three waits in a row: the Polygon PoS network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. Polygon PoS finalizes blocks with milestones once validators holding two thirds of the stake agree, and a finalized block cannot be reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.

  2. Polygon PoS milestones finalize it

    A deposit whose max fee is below the base fee, or that waits behind an earlier pending transaction, can stay pending until you speed it up.

  3. Exchange and ARBUSDCE payout

    The partner swaps the LINK and sends ARBUSDCE. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Arbitrum One

    Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.

Your ARBUSDCE address for the payout

Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
  • An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving ARBUSDCE on Arbitrum One: address and memo

Memo or tagNot used on this network.
Block explorerarbiscan.io

More about swapping on Arbitrum One

Send LINK on the right network

On the sending side, send LINK only on Polygon PoS, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the ARBUSDCE arrives

The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the ARBUSDCE only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.

If your LINK deposit is slow or stuck

Look up the transaction hash on PolygonScan. A deposit that stays pending usually has a max fee below the current base fee, which every transaction must pay, or a tip too small to be picked. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If PolygonScan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LINK to ARBUSDCE swap

Your deposit is public on Polygon PoS: your sending address, the deposit address, the amount and the fee show on PolygonScan, and they stay there. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep some POL on Polygon PoS for gas and check which network your wallet is on, since POL also exists as a token on Ethereum.
  • Copy your ARBUSDCE address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

LINK to ARBUSDCE Frequently Asked Questions

How do I swap LINK to ARBUSDCE?

Enter the LINK amount and your ARBUSDCE address in the form at the top, press Exchange Now, and send LINK on Polygon PoS to the one-time deposit address on your order page. After the Polygon PoS network confirms the deposit, the exchange partner sends ARBUSDCE on Arbitrum One to your address. No account or email is needed.

How much ARBUSDCE do I get for 1 LINK?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LINK to ARBUSDCE calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LINK to ARBUSDCE take?

There is no set time: the Polygon PoS network confirms the deposit first, then the exchange partner swaps it and sends the ARBUSDCE payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LINK to ARBUSDCE?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Chainlink to USD Coin Bridged without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the ARBUSDCE I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.

How do I swap ARBUSDCE back to LINK?

Use the ARBUSDCE to LINK page, linked next to the swap form. It works the same way in reverse: paste a Polygon PoS address, then send ARBUSDCE to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps