Exchange Currencies Track Order Guides Telegram bot

Swap Litecoin (LTC) to BeFi Labs (BEFI) with no sign-up

Enter the LTC amount, paste an Ethereum address from your own wallet, then send LTC to the one-time deposit address on your order page. Once the Litecoin network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BEFI on Ethereum straight to your address.

Swap BEFI to LTC instead

Rate
1 LTC ≈ 174,755.4879 BEFI
Network Fee
-
Deposit Fee
-

Enter an address on the Ethereum (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LTC to BEFI exchange rate

The LTC to BEFI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LTC amounts come to in BEFI after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

LTC to BEFI Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LTC Litecoin
You get (estimate)
BEFI Ethereum ERC-20
349,510.9758259 BEFI
Rate
1 LTC ≈ 174,755 BEFI
Value in USD
≈ $99.86
Network Fee
298.6401133 BEFI

LTC to BEFI conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1 LTC≈ 174,580 BEFI
5 LTC≈ 874,304 BEFI
10 LTC≈ 1,748,959 BEFI
50 LTC≈ 8,746,201 BEFI
100 LTC≈ 17,492,754 BEFI
500 LTC≈ 87,465,173 BEFI
1,000 LTC≈ 174,930,697 BEFI

LTC to BEFI daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest157,984 BEFI
Lowest143,325 BEFI
Change, 6 days−9.28%
157,984 143,325
Nov 16, 2026Nov 22, 2026
DateRate
1 LTC ≈ 143,325 BEFI
1 LTC ≈ 147,048 BEFI
1 LTC ≈ 150,537 BEFI
1 LTC ≈ 155,725 BEFI
1 LTC ≈ 156,745 BEFI
1 LTC ≈ 156,996 BEFI
1 LTC ≈ 157,984 BEFI
Live Market Snapshot Updated Nov 22, 2026 11:34 UTC
1 LTC price
$40.78
1 BEFI price
$0.0002857
1 LTC buys
174755.48791295 BEFI

How to swap LTC to BEFI

  1. Copy your BEFI address

    Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LTC amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BEFI estimate under it already has the payout fee taken out.

  3. Send LTC to the deposit address

    Press Exchange Now. Your order page shows a one-time Litecoin deposit address: send the amount you entered in one transaction. Send from your Litecoin wallet's regular balance, not from an MWEB balance, at the fee the wallet suggests; an MWEB payment reaches the main chain only inside a mined block.

  4. Follow the order until BEFI arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BEFI is in your wallet.

What the LTC to BEFI swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the Litecoin network fee yourself, in LTC: your wallet sets it from the transaction's size and a fee rate per kilobyte, not from the amount you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BEFI you get per LTC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LTC to BEFI at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Litecoin (LTC) BeFi Labs (BEFI)
Network Litecoin Ethereum
Type Native coin ERC-20 token
Contract - 0x8b9b95…42bd51
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.0003 LTC ≈ 294.4 BEFI
Route Cross-chain: Litecoin to Ethereum
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0039647 LTC
Account / ID Not needed to start a swap

How long the LTC to BEFI swap takes

The LTC to BEFI swap is three waits in a row: the Litecoin network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. Litecoin targets a block every 2.5 minutes, and the exchange partner swaps only after your deposit has the confirmations it requires, because each block on top makes the payment harder to reverse. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LTC, and the order page moves from waiting to confirming once the deposit is found.

  2. Litecoin blocks confirm it

    A deposit with a fee rate below what miners take now can wait much longer for its first confirmation, and Litecoin Core nodes refuse replacements by default.

  3. Exchange and BEFI payout

    The partner swaps the LTC and sends BEFI. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Ethereum

    Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.

Your BEFI address for the payout

An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for BEFI on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
  • A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.

Receiving BEFI on Ethereum: address and memo

Memo or tagNot used on this network.
Block exploreretherscan.io

More about swapping on Ethereum

Send LTC on the right network

On the sending side, send LTC only on Litecoin, the network your order page names. LTC sent on another network does not reach the deposit address. LTC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the BEFI arrives

The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the BEFI later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.

If the address belongs to an exchange, check that the exchange credits BEFI on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.

If your LTC deposit is slow or stuck

Look up your transaction ID on a Litecoin explorer such as litecoinspace.org. If it is still unconfirmed, its fee rate is probably below what miners take now. A replace-by-fee bump may go nowhere: Litecoin Core turns transaction replacement off by default, so nodes on default settings refuse the new version. Child pays for parent can still help, because Litecoin Core's mining code ranks a transaction together with its unconfirmed parents: spending the payment's unconfirmed change with a higher fee makes miners more likely to take both.

If you sent from an MWEB balance, nothing appears on the main chain until a block is mined: the miner pays the coins out as an output of that block's HogEx transaction, which never waits in the mempool. Look the deposit up on the explorer by the deposit address, because its output sits in that HogEx transaction.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LTC to BEFI swap

Your deposit is public: the amount and the deposit address stay on the Litecoin chain for anyone to look up, and so do your sending addresses when you pay from a regular balance. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Accept the fee your Litecoin wallet suggests, because Litecoin Core nodes refuse fee-bumping replacements by default and a low-fee deposit can wait a long time.
  • Copy your BEFI address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

LTC to BEFI Frequently Asked Questions

How do I swap LTC to BEFI?

Enter the LTC amount and your BEFI address in the form at the top, press Exchange Now, and send LTC to the one-time deposit address on your order page. After the Litecoin network confirms the deposit, the exchange partner sends BEFI on Ethereum to your address. No account or email is needed.

How much BEFI do I get for 1 LTC?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LTC to BEFI calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LTC to BEFI take?

There is no set time: the Litecoin network confirms the deposit first, then the exchange partner swaps it and sends the BEFI payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LTC to BEFI?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Litecoin to BeFi Labs without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the BEFI I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LTC arrived than you entered.

How do I swap BEFI back to LTC?

Use the BEFI to LTC page, linked next to the swap form. It works the same way in reverse: paste a Litecoin address, then send BEFI to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps