Enter the MORPHO amount, paste a classic XRP Ledger address from your own wallet, then send MORPHO on Base to the one-time deposit address on your order page. Once the Base network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XRP straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The MORPHO to XRP rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
MORPHO to XRP Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
MORPHOBaseERC-20
You get (estimate)
XRPXRP Ledger
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 15:11 UTC
1 XRP price
$0.9465
How to swap MORPHO to XRP
1
Copy your XRP address
Open your XRP Ledger wallet's receive screen and copy its classic address, which starts with r and is case-sensitive. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the destination tag it shows with the address.
2
Enter the MORPHO amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XRP estimate under it already has the payout fee taken out.
3
Send MORPHO to the deposit address
Press Exchange Now. Your order page shows a one-time Base deposit address: send the amount you entered in one transaction. Send from a wallet switched to Base that holds some ETH on Base for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until XRP arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XRP is in your wallet.
What the MORPHO to XRP swap costs
Two costs come out of the estimate before you see it: the exchange margin and the XRP Ledger network fee for your payout. You pay the Base network fee yourself, and Base charges it in ETH, for ETH and tokens alike: an execution fee on Base plus a fee for publishing the transaction to Ethereum, which your wallet estimates. Sending MORPHO on Base still costs gas, charged in ETH on Base, so most wallets need some ETH there as well as the MORPHO.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XRP you get per MORPHO drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
MORPHO to XRP at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Morpho (Base) (MORPHO)
XRP
Network
Base
XRP Ledger
Type
ERC-20 token
Native coin
Contract
0xBAa5CC…2a0842
-
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 22, 2026)
-
≈ 0.02 XRP
Route
Cross-chain: Base to XRP Ledger
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0018878 MORPHO
Account / ID
Not needed to start a swap
How long the MORPHO to XRP swap takes
The MORPHO to XRP swap is three waits in a row: the Base network confirms your deposit, the exchange partner swaps it, and the XRP Ledger network delivers the payout. Base builds a block every 200 milliseconds, and your deposit gets its first confirmation when one includes it. It becomes final once the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the MORPHO, and the order page moves from waiting to confirming once the deposit is found.
2A Base block includes it
A maximum fee below the current base fee, or an older pending transaction from your account, can hold it back.
3Exchange and XRP payout
The partner swaps the MORPHO and sends XRP. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout in a validated ledger
Your wallet shows the XRP once a validated ledger includes the payout, and from then on the result cannot change.
Your XRP address for the payout
A classic XRP Ledger address starts with r and is 25 to 35 characters of base58, case-sensitive. An X-address starts with X and packs the tag into the address. The swap form rejected an X-address, so use the classic r address and type the tag separately.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. XRP can also carry a destination tag. If your address comes from an exchange, enter the destination tag it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
Skipping an exchange's destination tag: if its account requires tags, the ledger rejects the payout; if not, the exchange cannot match the payout to you without manual work.
A tag with a wrong digit: the XRP Ledger cannot check tags, so the payout reaches the exchange without the number that identifies you.
A new address that has never held XRP: only a payment of at least the base reserve in XRP can create its account, so a smaller payout fails.
Receiving XRP on XRP Ledger: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
The payout is an ordinary XRP Ledger payment. It is final once a validated ledger includes it, usually within seconds of being sent, and nothing can change it after that. Every XRP Ledger account keeps a reserve of XRP that it cannot send to others, though it can pay transaction fees from it, and each later transaction destroys a small fee in XRP. If your address has never held XRP, the payout creates its account, and the base reserve then stays locked in it; validators can change the size of the reserve by vote.
If the address belongs to an exchange, copy the classic address and the destination tag from its XRP Ledger deposit page and check its minimum deposit; exchanges usually keep customers' funds in a few shared accounts and credit each deposit by its tag. To check the payout yourself, open the payout hash from the order page in an XRP Ledger explorer such as livenet.xrpl.org.
If your MORPHO deposit is slow or stuck
Look up the transaction hash on Basescan. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, OP Mainnet and other EVM networks, but the order waits for a transfer on Base only. While Base throttles transactions to manage its data posting to Ethereum, even ones with a high priority fee can be delayed.
If your wallet still shows the deposit as pending, its maximum fee may be below the current base fee, its priority fee may be too low while demand is high, or an older pending transaction from your address may be holding it back. If your wallet offers speed up, use it on the oldest pending one: it sends a replacement with the same nonce and a higher fee. The replacement has a new hash, so give that one to support.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your MORPHO to XRP swap
Your deposit is public: the amount, your sending address and the deposit address show on Basescan, and the transaction is also published to Ethereum. The payout, its amount, your receiving address and any destination tag are visible to anyone on an XRP Ledger explorer, and they stay in the ledger's public history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Base and keep some ETH on Base for gas before you send, even when the deposit is a token.
Copy your XRP address from the wallet's receive screen and compare its start and end after pasting.
Enter the destination tag your exchange gives you for XRP, or the payout cannot be credited to your account.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
MORPHO to XRP Frequently Asked Questions
How do I swap MORPHO to XRP?
Enter the MORPHO amount and your XRP address in the form at the top, press Exchange Now, and send MORPHO on Base to the one-time deposit address on your order page. After the Base network confirms the deposit, the exchange partner sends XRP to your address. No account or email is needed.
How much XRP do I get for 1 MORPHO?
Type 1 into the MORPHO to XRP calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does MORPHO to XRP take?
There is no set time: the Base network confirms the deposit first, then the exchange partner swaps it and sends the XRP payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for MORPHO to XRP?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Morpho to XRP without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap MORPHO to XRP?
For the payout, only if your XRP address belongs to an exchange: enter the destination tag it shows with the address. A wallet you control usually needs none.
Why is the XRP I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less MORPHO arrived than you entered.
How do I swap XRP back to MORPHO?
Use the XRP to MORPHO page, linked next to the swap form. It works the same way in reverse: paste a Base address, then send XRP to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.