Swap NEAR Protocol (NEAR) to Ripple USD (RLUSD) with no sign-up
Enter the NEAR amount, paste an Ethereum address from your own wallet, then send NEAR to the one-time deposit address on your order page. Once the NEAR Protocol network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends RLUSD on Ethereum straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The NEAR to RLUSD rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several NEAR amounts come to in RLUSD after fees. It is worked out from the page's latest quote and carries that quote's time.
NEAR to RLUSD Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
NEARNEAR
You get (estimate)
RLUSDEthereumERC-20
Rate
1 NEAR ≈ 2.79175 RLUSD
Value in USD
≈ $85.97
Network Fee
0.1315735 RLUSD
NEAR to RLUSD conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 03:34 UTC
1 NEAR price
$2.94
1 RLUSD price
$1.03
1 NEAR buys
2.79174856 RLUSD
How to swap NEAR to RLUSD
1
Copy your RLUSD address
Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the NEAR amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The RLUSD estimate under it already has the payout fee taken out.
3
Send NEAR to the deposit address
Press Exchange Now. Your order page shows a one-time NEAR Protocol deposit address: send the amount you entered in one transaction. Send NEAR from your NEAR wallet and keep some NEAR beside the amount, because the gas is paid in NEAR up front.
4
Follow the order until RLUSD arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the RLUSD is in your wallet.
What the NEAR to RLUSD swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You normally pay the NEAR gas yourself, in NEAR: it is taken from your balance up front at a gas price that moves with demand from block to block, and what the transfer does not use is refunded. If the deposit address is an implicit account that does not exist yet, your transfer creates it, and NEAR keeps back part of the gas refund as a fixed charge for that.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the RLUSD you get per NEAR drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
NEAR to RLUSD at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
NEAR Protocol (NEAR)
Ripple USD (Ethereum) (RLUSD)
Network
NEAR Protocol
Ethereum
Type
Native coin
ERC-20 token
Contract
-
0x8292bb…6317ed
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.0454 NEAR
≈ 0.1333 RLUSD
Route
Cross-chain: NEAR Protocol to Ethereum
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.2013759 NEAR
Account / ID
Not needed to start a swap
How long the NEAR to RLUSD swap takes
The NEAR to RLUSD swap is three waits in a row: the NEAR Protocol network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. NEAR blocks typically come about 600 milliseconds apart and become final in about 1.2 seconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the NEAR, and the order page moves from waiting to confirming once the deposit is found.
2NEAR blocks finalize it
The transfer runs as a receipt on the receiving account's shard, which can take a later block.
3Exchange and RLUSD payout
The partner swaps the NEAR and sends RLUSD. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Ethereum
Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.
Your RLUSD address for the payout
An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for RLUSD on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.
On the sending side, send NEAR only on the NEAR Protocol, the network your order page names. NEAR sent on another network does not reach the deposit address. NEAR exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the RLUSD later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.
If the address belongs to an exchange, check that the exchange credits RLUSD on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.
If your NEAR deposit is slow or stuck
If the order still says waiting, look up your transaction hash on an explorer such as NearBlocks. A transfer becomes a receipt that runs on the receiving account's shard, which can take a later block, and congestion can spread it over more. A higher gas price does not help: NEAR charges a fixed amount of gas per action and gives no priority for paying more.
On the explorer, a final transaction can still hold a failed receipt, so read the status of each receipt. If the transfer's receipt failed, nothing was delivered: the attached NEAR is refunded to your account and only the gas is spent. Nothing reached the deposit address then, so you can send a new transfer while the order page still shows waiting.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your NEAR to RLUSD swap
Your deposit is public: the amount, your account ID and the deposit account stay on the NEAR chain, where anyone can look them up on an explorer such as NearBlocks. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave some NEAR in your account beyond the amount you send, because the gas is taken up front, before the transfer runs.
Copy your RLUSD address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
NEAR to RLUSD Frequently Asked Questions
How do I swap NEAR to RLUSD?
Enter the NEAR amount and your RLUSD address in the form at the top, press Exchange Now, and send NEAR to the one-time deposit address on your order page. After the NEAR Protocol network confirms the deposit, the exchange partner sends RLUSD on Ethereum to your address. No account or email is needed.
How much RLUSD do I get for 1 NEAR?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the NEAR to RLUSD calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does NEAR to RLUSD take?
There is no set time: the NEAR Protocol network confirms the deposit first, then the exchange partner swaps it and sends the RLUSD payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for NEAR to RLUSD?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap NEAR Protocol to Ripple USD without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the RLUSD I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less NEAR arrived than you entered.
How do I swap RLUSD back to NEAR?
Use the RLUSD to NEAR page, linked next to the swap form. It works the same way in reverse: paste a NEAR Protocol address, then send RLUSD to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.