Exchange Currencies Track Order Guides Telegram bot

Swap o1.exchange (O) to Tether USD (USDT) with no sign-up

Enter the O amount, paste a TON wallet address from your own wallet, then send O on Base to the one-time deposit address on your order page. Once the Base network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends USDT on TON straight to your address.

Swap USDT to O instead

Rate
1 O ≈ 0.599972 USDT
Network Fee
-
Deposit Fee
-

Enter an address on the TON (Jetton) network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

O to USDT exchange rate

The O to USDT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several O amounts come to in USDT after fees. It is worked out from the page's latest quote and carries that quote's time.

O to USDT Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

O Base ERC-20
You get (estimate)
USDT TON Jetton
119.994301 USDT
Rate
1 O ≈ 0.599972 USDT
Value in USD
≈ $119.99
Network Fee
0.0585279 USDT

O to USDT conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 O≈ 59.9659 USDT
500 O≈ 300.08 USDT
1,000 O≈ 600.222 USDT
5,000 O≈ 3,001.36 USDT
10,000 O≈ 6,002.78 USDT
50,000 O≈ 30,014.1 USDT
Live Market Snapshot Updated Nov 22, 2026 19:43 UTC
1 O price
$0.6367
1 USDT price
$1.00
1 O buys
0.59997151 USDT

How to swap O to USDT

  1. Copy your USDT address

    Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the O amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The USDT estimate under it already has the payout fee taken out.

  3. Send O to the deposit address

    Press Exchange Now. Your order page shows a one-time Base deposit address: send the amount you entered in one transaction. Send from a wallet switched to Base that holds some ETH on Base for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until USDT arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the USDT is in your wallet.

What the O to USDT swap costs

Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Base network fee yourself, and Base charges it in ETH, for ETH and tokens alike: an execution fee on Base plus a fee for publishing the transaction to Ethereum, which your wallet estimates. Sending O on Base still costs gas, charged in ETH on Base, so most wallets need some ETH there as well as the O.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the USDT you get per O drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

O to USDT at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset o1.exchange (O) Tether USD (TON) (USDT)
Network Base TON
Type ERC-20 token Jetton token
Contract 0x182FA6…4620b2 EQCxE6mU…Id_sDs
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 22, 2026) ≈ 0.006637 O ≈ 0.0568 USDT
Route Cross-chain: Base to TON
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.2213082 O
Account / ID Not needed to start a swap

How long the O to USDT swap takes

The O to USDT swap is three waits in a row: the Base network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Base builds a block every 200 milliseconds, and your deposit gets its first confirmation when one includes it. It becomes final once the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the O, and the order page moves from waiting to confirming once the deposit is found.

  2. A Base block includes it

    A maximum fee below the current base fee, or an older pending transaction from your account, can hold it back.

  3. Exchange and USDT payout

    The partner swaps the O and sends USDT. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on TON

    Your wallet lists the USDT under your address once the transfer is in a block, and a masterchain block then makes it final.

Your USDT address for the payout

A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. USDT on TON can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
  • An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
  • A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.

Receiving USDT on TON: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorertonviewer.com

More about swapping on TON

Which network your USDT arrives on

This page pays USDT on TON. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.

After the USDT arrives

The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your USDT sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.

If the address belongs to an exchange, check that the exchange gives it for USDT deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for USDT, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.

If your O deposit is slow or stuck

Look up the transaction hash on Basescan. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, OP Mainnet and other EVM networks, but the order waits for a transfer on Base only. While Base throttles transactions to manage its data posting to Ethereum, even ones with a high priority fee can be delayed.

If your wallet still shows the deposit as pending, its maximum fee may be below the current base fee, its priority fee may be too low while demand is high, or an older pending transaction from your address may be holding it back. If your wallet offers speed up, use it on the oldest pending one: it sends a replacement with the same nonce and a higher fee. The replacement has a new hash, so give that one to support.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your O to USDT swap

Your deposit is public: the amount, your sending address and the deposit address show on Basescan, and the transaction is also published to Ethereum. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Base and keep some ETH on Base for gas before you send, even when the deposit is a token.
  • Copy your USDT address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for USDT, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

O to USDT Frequently Asked Questions

How do I swap O to USDT?

Enter the O amount and your USDT address in the form at the top, press Exchange Now, and send O on Base to the one-time deposit address on your order page. After the Base network confirms the deposit, the exchange partner sends USDT on TON to your address. No account or email is needed.

How much USDT do I get for 1 O?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the O to USDT calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does O to USDT take?

There is no set time: the Base network confirms the deposit first, then the exchange partner swaps it and sends the USDT payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for O to USDT?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap o1.exchange to Tether USD without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap O to USDT?

For the payout, only if your USDT address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Can I receive USDT on another network?

Yes, through a different entry in the coin list, since this page pays USDT on TON. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the USDT I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less O arrived than you entered.

How do I swap USDT back to O?

Use the USDT to O page, linked next to the swap form. It works the same way in reverse: paste a Base address, then send USDT to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps