Swap Rain (RAIN) to Tether USD (USDT) with no sign-up
Enter the RAIN amount, paste a TON wallet address from your own wallet, then send RAIN on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends USDT on TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The RAIN to USDT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several RAIN amounts come to in USDT after fees. It is worked out from the page's latest quote and carries that quote's time.
RAIN to USDT Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
RAINArbitrumERC-20
You get (estimate)
USDTTONJetton
Rate
1 RAIN ≈ 0.0031466 USDT
Value in USD
≈ $94.40
Network Fee
0.0585975 USDT
RAIN to USDT conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 16:47 UTC
1 RAIN price
$0.00335017
1 USDT price
$1.00
1 RAIN buys
0.0031466 USDT
How to swap RAIN to USDT
1
Copy your USDT address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the RAIN amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The USDT estimate under it already has the payout fee taken out.
3
Send RAIN to the deposit address
Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until USDT arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the USDT is in your wallet.
What the RAIN to USDT swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending RAIN on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the RAIN.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the USDT you get per RAIN drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
RAIN to USDT at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
RAIN
Tether USD (TON) (USDT)
Network
Arbitrum One
TON
Type
ERC-20 token
Jetton token
Contract
0x251182…64099d
EQCxE6mU…Id_sDs
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 22, 2026)
≈ 16.95 RAIN
≈ 0.0568 USDT
Route
Cross-chain: Arbitrum One to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
83.6081464 RAIN
Account / ID
Not needed to start a swap
How long the RAIN to USDT swap takes
The RAIN to USDT swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the RAIN, and the order page moves from waiting to confirming once the deposit is found.
2Arbitrum One sequences the deposit
The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.
3Exchange and USDT payout
The partner swaps the RAIN and sends USDT. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the USDT under your address once the transfer is in a block, and a masterchain block then makes it final.
Your USDT address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. USDT on TON can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
Receiving USDT on TON: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
This page pays USDT on TON. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your USDT sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.
If the address belongs to an exchange, check that the exchange gives it for USDT deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for USDT, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your RAIN deposit is slow or stuck
Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.
Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your RAIN to USDT swap
Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
Copy your USDT address from the wallet's receive screen and compare its start and end after pasting.
Enter the memo your exchange gives you for USDT, or the payout cannot be credited to your account.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
RAIN to USDT Frequently Asked Questions
How do I swap RAIN to USDT?
Enter the RAIN amount and your USDT address in the form at the top, press Exchange Now, and send RAIN on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends USDT on TON to your address. No account or email is needed.
How much USDT do I get for 1 RAIN?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the RAIN to USDT calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does RAIN to USDT take?
There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the USDT payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for RAIN to USDT?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Rain to Tether USD without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap RAIN to USDT?
For the payout, only if your USDT address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Can I receive USDT on another network?
Yes, through a different entry in the coin list, since this page pays USDT on TON. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the USDT I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less RAIN arrived than you entered.
How do I swap USDT back to RAIN?
Use the USDT to RAIN page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send USDT to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.