Swap Ripple USD (RLUSD) to Cosmos (ATOM) with no sign-up
Enter the RLUSD amount, paste a Cosmos Hub address from your own wallet, then send RLUSD on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ATOM straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The RLUSD to ATOM rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several RLUSD amounts come to in ATOM after fees. It is worked out from the page's latest quote and carries that quote's time.
RLUSD to ATOM Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
RLUSDEthereumERC-20
You get (estimate)
ATOMCosmos
Rate
1 RLUSD ≈ 0.8339 ATOM
Value in USD
≈ $100.15
Network Fee
0.1 ATOM
RLUSD to ATOM conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 19:44 UTC
1 RLUSD price
$1.03
1 ATOM price
$1.20
1 RLUSD buys
0.83390038 ATOM
How to swap RLUSD to ATOM
1
Copy your ATOM address
Open your wallet's Cosmos Hub account, not an account on another Cosmos chain, and copy its address, which starts with cosmos1. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the RLUSD amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ATOM estimate under it already has the payout fee taken out.
3
Send RLUSD to the deposit address
Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.
4
Follow the order until ATOM arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ATOM is in your wallet.
What the RLUSD to ATOM swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Cosmos Hub network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ATOM you get per RLUSD drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
RLUSD to ATOM at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ripple USD (Ethereum) (RLUSD)
Cosmos (ATOM)
Network
Ethereum
Cosmos Hub
Type
ERC-20 token
Native coin
Contract
0x8292bb…6317ed
-
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 22, 2026)
≈ 0.3344 RLUSD
≈ 0.1 ATOM
Route
Cross-chain: Ethereum to Cosmos Hub
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
1.0076551 RLUSD
Account / ID
Not needed to start a swap
How long the RLUSD to ATOM swap takes
The RLUSD to ATOM swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the Cosmos Hub network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the RLUSD, and the order page moves from waiting to confirming once the deposit is found.
2Ethereum includes it in a block
Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.
3Exchange and ATOM payout
The partner swaps the RLUSD and sends ATOM. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Cosmos Hub
Your wallet shows the ATOM once a committed block includes the payout, usually a few seconds after it is sent.
Your ATOM address for the payout
A Cosmos Hub address starts with cosmos1 and is usually 45 characters of lowercase letters and digits (bech32). Other Cosmos chains use their own prefixes, such as osmo1 on Osmosis, and the swap form rejects them. A cosmosvaloper1 address belongs to a validator and is rejected too.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. ATOM can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
Leaving out the memo an exchange shows: it uses the memo to find your account among customers sharing one deposit address, so a deposit without it may never be credited.
Checking only the start and end of the address before a large payout: clipboard malware swaps in lookalikes, so compare the middle characters too.
Paying out to an address whose recovery phrase you have not saved: on the Cosmos Hub nobody can reset or recover a lost key.
Receiving ATOM on Cosmos Hub: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
The payout is a Cosmos Hub transfer and is final once a committed block includes it, usually a few seconds after it is sent. A new cosmos1 address needs no setup to receive, because an address can take in funds before it has ever signed a transaction. Moving the ATOM later costs a network fee in ATOM, so keep some ATOM in the account.
If the address belongs to an exchange, copy the cosmos1 address and any memo from its ATOM deposit page for the Cosmos Hub network, and check its minimum deposit. To check the payout yourself, open the payout hash from the order page in a Cosmos Hub explorer such as mintscan.io.
If your RLUSD deposit is slow or stuck
Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your RLUSD to ATOM swap
Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount, your cosmos1 address and any memo are visible to anyone on a Cosmos Hub explorer such as mintscan.io, and they stay in the chain's history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
Copy your ATOM address from the wallet's receive screen and compare its start and end after pasting.
Enter the memo your exchange gives you for ATOM, or the payout cannot be credited to your account.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
RLUSD to ATOM Frequently Asked Questions
How do I swap RLUSD to ATOM?
Enter the RLUSD amount and your ATOM address in the form at the top, press Exchange Now, and send RLUSD on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends ATOM to your address. No account or email is needed.
How much ATOM do I get for 1 RLUSD?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the RLUSD to ATOM calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does RLUSD to ATOM take?
There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the ATOM payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for RLUSD to ATOM?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ripple USD to Cosmos without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap RLUSD to ATOM?
For the payout, only if your ATOM address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Why is the ATOM I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less RLUSD arrived than you entered.
How do I swap ATOM back to RLUSD?
Use the ATOM to RLUSD page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send ATOM to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.