Exchange Currencies Track Order Guides Telegram bot

Swap SPDR S&P 500 Trust Tokenized ETF (SPY) to Chainlink (LINK) with no sign-up

Enter the SPY amount, paste an Ethereum address from your own wallet, then send SPY on Robinhood Chain to the one-time deposit address on your order page. Once the Robinhood Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LINK on Ethereum straight to your address.

Swap LINK to SPY instead

Rate
1 SPY ≈ 78.5475 LINK
Network Fee
-
Deposit Fee
-

Enter an address on the Ethereum (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

SPY to LINK exchange rate

The SPY to LINK rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several SPY amounts come to in LINK after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

SPY to LINK Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

SPY Robinhood
You get (estimate)
LINK Ethereum ERC-20
78.5474642 LINK
Rate
1 SPY ≈ 78.5475 LINK
Value in USD
≈ $711.43
Network Fee
0.0068123 LINK

SPY to LINK conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
0.1 SPY≈ 7.83091 LINK
0.5 SPY≈ 39.2605 LINK
1 SPY≈ 78.5475 LINK
5 SPY≈ 392.843 LINK
10 SPY≈ 785.713 LINK
50 SPY≈ 3,928.67 LINK

SPY to LINK daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest82.171 LINK
Lowest79.8188 LINK
Change, 6 days+1.03%
82.171 79.8188
Nov 16, 2026Nov 22, 2026
DateRate
1 SPY ≈ 82.171 LINK
1 SPY ≈ 82.0429 LINK
1 SPY ≈ 79.8188 LINK
1 SPY ≈ 81.4611 LINK
1 SPY ≈ 79.9839 LINK
1 SPY ≈ 81.3572 LINK
1 SPY ≈ 81.3363 LINK
Live Market Snapshot Updated Nov 22, 2026 16:37 UTC
1 SPY price
$727.18
1 LINK price
$9.06
1 SPY buys
78.5474642 LINK

How to swap SPY to LINK

  1. Copy your LINK address

    Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the SPY amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LINK estimate under it already has the payout fee taken out.

  3. Send SPY to the deposit address

    Press Exchange Now. Your order page shows a one-time Robinhood Chain deposit address: send the amount you entered in one transaction. Send SPY from a wallet that holds it on Robinhood Chain and also holds enough of the coin the network charges its fee in, usually its own coin.

  4. Follow the order until LINK arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LINK is in your wallet.

What the SPY to LINK swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the Robinhood Chain network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send. For a token, that fee is usually not paid in the token itself, so keep enough of the fee coin in the same wallet next to the SPY.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LINK you get per SPY drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

SPY to LINK at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset SPDR S&P 500 Trust Tokenized ETF (Robinhood) (SPY) Chainlink (LINK)
Network Robinhood Chain Ethereum
Type Token ERC-20 token
Contract 0x117cc2…3B4C0C 0x514910…f986ca
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.0002503 SPY ≈ 0.006848 LINK
Route Cross-chain: Robinhood Chain to Ethereum
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0007386 SPY
Account / ID Not needed to start a swap

How long the SPY to LINK swap takes

The SPY to LINK swap is three waits in a row: the Robinhood Chain network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. The time Robinhood Chain needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the SPY, and the order page moves from waiting to confirming once the deposit is found.

  2. Robinhood Chain confirms the deposit

    When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.

  3. Exchange and LINK payout

    The partner swaps the SPY and sends LINK. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Ethereum

    Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.

Your LINK address for the payout

An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for LINK on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
  • A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.

Receiving LINK on Ethereum: address and memo

Memo or tagNot used on this network.
Block exploreretherscan.io

More about swapping on Ethereum

Which network your LINK arrives on

This page pays LINK on Ethereum. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.

After the LINK arrives

The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the LINK later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.

If the address belongs to an exchange, check that the exchange credits LINK on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.

If your SPY deposit is slow or stuck

Look up the transaction ID from your wallet in a block explorer for Robinhood Chain. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your SPY to LINK swap

Your deposit is recorded on Robinhood Chain for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send SPY only on Robinhood Chain, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
  • Copy your LINK address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

SPY to LINK Frequently Asked Questions

How do I swap SPY to LINK?

Enter the SPY amount and your LINK address in the form at the top, press Exchange Now, and send SPY on Robinhood Chain to the one-time deposit address on your order page. After the Robinhood Chain network confirms the deposit, the exchange partner sends LINK on Ethereum to your address. No account or email is needed.

How much LINK do I get for 1 SPY?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the SPY to LINK calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does SPY to LINK take?

There is no set time: the Robinhood Chain network confirms the deposit first, then the exchange partner swaps it and sends the LINK payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for SPY to LINK?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap SPDR S&P 500 Trust Tokenized ETF to Chainlink without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive LINK on another network?

Yes, through a different entry in the coin list, since this page pays LINK on Ethereum. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the LINK I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less SPY arrived than you entered.

How do I swap LINK back to SPY?

Use the LINK to SPY page, linked next to the swap form. It works the same way in reverse: paste a Robinhood Chain address, then send LINK to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps