Exchange Currencies Track Order Guides Telegram bot

Swap TRON (TRX) to Babylon (BABY) with no sign-up

Enter the TRX amount, paste your Babylon Genesis address from your own wallet, then send TRX to the one-time deposit address on your order page. Once the TRON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BABY on Babylon Genesis straight to your address.

Swap BABY to TRX instead

Rate
1 TRX ā‰ˆ 38.6944 BABY
Network Fee
-
Deposit Fee
-

Enter an address on the Babylon Genesis network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

TRX to BABY exchange rate

The TRX to BABY rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several TRX amounts come to in BABY after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

TRX to BABY Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

TRX TRON
You get (estimate)
BABY Babylon Genesis
11,608.309746 BABY
Rate
1 TRX ā‰ˆ 38.6944 BABY
Value in USD
ā‰ˆ $91.87
Network Fee
0.1 BABY

TRX to BABY conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 TRXā‰ˆ 3,866.79 BABY
500 TRXā‰ˆ 19,349.8 BABY
1,000 TRXā‰ˆ 38,703.6 BABY
5,000 TRXā‰ˆ 193,534 BABY
10,000 TRXā‰ˆ 387,072 BABY
50,000 TRXā‰ˆ 1,935,376 BABY
100,000 TRXā‰ˆ 3,870,756 BABY

TRX to BABY daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest40.9587 BABY
Lowest36.0757 BABY
Change, 6 days+13.54%
40.9587 36.0757
Nov 16, 2026Nov 22, 2026
DateRate
1 TRX ā‰ˆ 40.9587 BABY
1 TRX ā‰ˆ 38.5824 BABY
1 TRX ā‰ˆ 36.8986 BABY
1 TRX ā‰ˆ 36.9131 BABY
1 TRX ā‰ˆ 37.2949 BABY
1 TRX ā‰ˆ 36.3002 BABY
1 TRX ā‰ˆ 36.0757 BABY
Live Market Snapshot Updated Nov 22, 2026 14:58 UTC
1 TRX price
$0.3128
1 BABY price
$0.00791412
1 TRX buys
38.69436582 BABY

How to swap TRX to BABY

  1. Copy your BABY address

    Open your wallet's receive screen for BABY on Babylon Genesis and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the TRX amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BABY estimate under it already has the payout fee taken out.

  3. Send TRX to the deposit address

    Press Exchange Now. Your order page shows a one-time TRON deposit address: send the amount you entered in one transaction. Send from a TRON wallet that holds TRX for the fee, because a TRON transfer burns TRX when your Bandwidth or Energy does not cover it.

  4. Follow the order until BABY arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BABY is in your wallet.

What the TRX to BABY swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Babylon Genesis network fee for your payout. You pay the TRON network fee from the sending address: the transfer uses Bandwidth from your staked or delegated TRX or the free allowance, and if neither covers the whole transfer, TRX is burned for all of it. If the deposit address has never been used, your TRX transfer also activates it, and TRON charges the sender an account creation fee for that on top of the usual cost.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BABY you get per TRX drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

TRX to BABY at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset TRON (TRX) Babylon (BABY)
Network TRON Babylon Genesis
Type Native coin Token
Contract - ^[0-9A-Z…,120}$
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 22, 2026) ā‰ˆ 0.1 TRX ā‰ˆ 0.1 BABY
Route Cross-chain: TRON to Babylon Genesis
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.226029 TRX
Account / ID Not needed to start a swap

How long the TRX to BABY swap takes

The TRX to BABY swap is three waits in a row: the TRON network confirms your deposit, the exchange partner swaps it, and the Babylon Genesis network delivers the payout. TRON schedules a block every 3 seconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the TRX, and the order page moves from waiting to confirming once the deposit is found.

  2. TRON solidifies the deposit

    A block is final once at least 19 of TRON's 27 block producers have produced blocks at or above its height, typically about a minute later.

  3. Exchange and BABY payout

    The partner swaps the TRX and sends BABY. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Babylon Genesis

    Your wallet lists the BABY as received once Babylon Genesis has confirmed the payout.

Your BABY address for the payout

A Babylon Genesis address is bech32 and starts with bbn1. The swap form accepted bbn1 addresses in our checks. A 0x address with 40 hex characters was rejected in our checks, so do not paste an EVM address here.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. BABY on Babylon Genesis can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • An address for BABY on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving BABY on Babylon Genesis: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerwww.mintscan.io

Send TRX on the right network

On the sending side, send TRX only on TRON, the network your order page names. TRX sent on another network does not reach the deposit address. TRX exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the BABY arrives

The payout is an ordinary Babylon Genesis transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Babylon Genesis and, for a token, that it displays this token. To move the BABY later, the same wallet also needs the coin Babylon Genesis charges fees in, which is usually its own coin.

If the address belongs to an exchange, check that the exchange accepts BABY on Babylon Genesis, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Babylon Genesis block explorer.

If your TRX deposit is slow or stuck

Look up the transaction ID on Tronscan. If a token transfer shows as failed, for example with OUT_OF_ENERGY, no tokens moved, but the Energy it used is still charged and not refunded. A failed transaction stays failed, so add TRX or Energy, or raise the fee limit if your wallet allows it, and then send again.

If Tronscan cannot find the transaction ID, the network may have dropped it, since TRON drops a transaction that is not in a block by its expiration time. Send again only once your wallet reports it expired and your balance still holds the amount: until it expires, the first one could still land, and you would pay twice.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your TRX to BABY swap

Your deposit is public on TRON: anyone can look up the sending and deposit addresses, the amount, and the TRX or resources the transfer used on Tronscan. The payout is recorded on Babylon Genesis too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep spare TRX in the sending address for the fee, because a token transfer that runs out of Energy fails and the TRX it burned is not refunded.
  • Copy your BABY address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for BABY, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

TRX to BABY Frequently Asked Questions

How do I swap TRX to BABY?

Enter the TRX amount and your BABY address in the form at the top, press Exchange Now, and send TRX to the one-time deposit address on your order page. After the TRON network confirms the deposit, the exchange partner sends BABY on Babylon Genesis to your address. No account or email is needed.

How much BABY do I get for 1 TRX?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the TRX to BABY calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does TRX to BABY take?

There is no set time: the TRON network confirms the deposit first, then the exchange partner swaps it and sends the BABY payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for TRX to BABY?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap TRON to Babylon without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap TRX to BABY?

For the payout, only if your BABY address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Why is the BABY I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less TRX arrived than you entered.

How do I swap BABY back to TRX?

Use the BABY to TRX page, linked next to the swap form. It works the same way in reverse: paste a TRON address, then send BABY to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps