Exchange Currencies Track Order Guides Telegram bot

Swap World Liberty Financial USD (USD1) to JetTon Games (JETTON) with no sign-up

Enter the USD1 amount, paste a TON wallet address from your own wallet, then send USD1 on Solana to the one-time deposit address on your order page. Once the Solana network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends JETTON on TON straight to your address.

Swap JETTON to USD1 instead

Network Fee
-
Deposit Fee
-

Enter an address on the TON (Jetton) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USD1 to JETTON exchange rate

The USD1 to JETTON rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

USD1 to JETTON Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USD1 Solana SPL
You get (estimate)
JETTON TON Jetton
0
Rate
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 17:37 UTC
1 USD1 price
$1.03

How to swap USD1 to JETTON

  1. Copy your JETTON address

    Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USD1 amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The JETTON estimate under it already has the payout fee taken out.

  3. Send USD1 to the deposit address

    Press Exchange Now. Your order page shows a one-time Solana deposit address: send the amount you entered in one transaction. Send from any Solana wallet and copy the transaction signature, Solana's name for the transaction ID, so you can look the deposit up later.

  4. Follow the order until JETTON arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the JETTON is in your wallet.

What the USD1 to JETTON swap costs

Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. The Solana network fee is paid in SOL, normally by the sending wallet: a base charge per signature plus any priority fee, charged even if the transaction fails and not tied to the amount. If the deposit address has never held USD1, your wallet must create its token account in the same transaction, which costs extra SOL as rent that you do not get back.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the JETTON you get per USD1 drops near the minimum.

USD1 to JETTON at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset World Liberty Financial USD (Solana) (USD1) JetTon Games (JETTON)
Network Solana TON
Type SPL token Jetton token
Contract USD1ttGY…zvEmuB EQAQXlWJ…JetTon
Memo / tag Not needed Not needed
Route Cross-chain: Solana to TON
Rate Floating, estimate shown before you send
Account / ID Not needed to start a swap

How long the USD1 to JETTON swap takes

The USD1 to JETTON swap is three waits in a row: the Solana network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Solana produces blocks in slots of about 200 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USD1, and the order page moves from waiting to confirming once the deposit is found.

  2. Solana finalizes the deposit

    Once a block includes the deposit, Solana's Alpenglow consensus targets finality in roughly 150 milliseconds. A transaction that misses its blockhash window expires instead of waiting.

  3. Exchange and JETTON payout

    The partner swaps the USD1 and sends JETTON. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on TON

    Your wallet lists the JETTON under your address once the transfer is in a block, and a masterchain block then makes it final.

Your JETTON address for the payout

A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
  • An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
  • A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.

Receiving JETTON on TON: address and memo

Memo or tagNot used on this network.
Block explorertonviewer.com

More about swapping on TON

Send USD1 on the right network

On the sending side, send USD1 only on Solana, the network your order page names. USD1 sent on another network does not reach the deposit address. USD1 exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the JETTON arrives

The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your JETTON sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.

If the address belongs to an exchange, check that the exchange gives it for JETTON deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for JETTON, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.

If your USD1 deposit is slow or stuck

Look up the transaction signature on a Solana explorer such as Solscan. By default, a Solana transaction expires if no block includes it within 150 blocks of the blockhash it was signed with, about 30 seconds at the current 200-millisecond slots, and after that it can never be processed.

A transaction the explorer marks as failed moved no coins but still cost its fee, and it stays failed. Send again only once the first attempt shows as failed, or has expired without your balance dropping; while it may still land, a second send could become a second deposit. A signed transaction's fee cannot be raised, so when blocks are busy, give the new attempt a higher priority fee, if your wallet lets you set one.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USD1 to JETTON swap

Your deposit is public on Solana: anyone can look up the sending wallet, the deposit address, the amount and the fee in an explorer such as Solscan. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Check that the sending wallet holds SOL for the fee besides the USD1 you send, before you create the order.
  • Copy your JETTON address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USD1 to JETTON Frequently Asked Questions

How do I swap USD1 to JETTON?

Enter the USD1 amount and your JETTON address in the form at the top, press Exchange Now, and send USD1 on Solana to the one-time deposit address on your order page. After the Solana network confirms the deposit, the exchange partner sends JETTON on TON to your address. No account or email is needed.

How much JETTON do I get for 1 USD1?

Type 1 into the USD1 to JETTON calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does USD1 to JETTON take?

There is no set time: the Solana network confirms the deposit first, then the exchange partner swaps it and sends the JETTON payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USD1 to JETTON?

Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap World Liberty Financial USD to JetTon Games without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the JETTON I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USD1 arrived than you entered.

How do I swap JETTON back to USD1?

Use the JETTON to USD1 page, linked next to the swap form. It works the same way in reverse: paste a Solana address, then send JETTON to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.

Guides for this swap

Related swaps

Popular swaps