Exchange Currencies Track Order Guides Telegram bot

Swap World Liberty Financial USD (USD1) to Plasma (XPL) with no sign-up

Enter the USD1 amount, paste your Plasma address from your own wallet, then send USD1 on Solana to the one-time deposit address on your order page. Once the Solana network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XPL straight to your address.

Swap XPL to USD1 instead

Network Fee
-
Deposit Fee
-

Enter an address on the Plasma network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USD1 to XPL exchange rate

The USD1 to XPL rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

USD1 to XPL Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USD1 Solana SPL
You get (estimate)
XPL Plasma
0
Rate
-
Value in USD
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 12:09 UTC
1 USD1 price
$1.03
1 XPL price
$0.0462

USD1 to XPL market price range

Over the last 30 days, 1 USD1 was worth between 11.297 and 17.444 XPL at market prices. Over the last 90 days the range was 8.727 to 17.444 XPL.

Aug 9, 2026Low 8.727 · High 17.444 XPLNov 6, 2026

Market price of 1 USD1 in XPL over the last 90 days

Based on daily market prices, checked on Nov 7, 2026. This is not your swap rate: the estimate in the swap form includes fees and moves with the market.

How to swap USD1 to XPL

  1. Copy your XPL address

    Open your wallet's receive screen for XPL on Plasma and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USD1 amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XPL estimate under it already has the payout fee taken out.

  3. Send USD1 to the deposit address

    Press Exchange Now. Your order page shows a one-time Solana deposit address: send the amount you entered in one transaction. Send from any Solana wallet and copy the transaction signature, Solana's name for the transaction ID, so you can look the deposit up later.

  4. Follow the order until XPL arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XPL is in your wallet.

What the USD1 to XPL swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Plasma network fee for your payout. The Solana network fee is paid in SOL, normally by the sending wallet: a base charge per signature plus any priority fee, charged even if the transaction fails and not tied to the amount. If the deposit address has never held USD1, your wallet must create its token account in the same transaction, which costs extra SOL as rent that you do not get back.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XPL you get per USD1 drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USD1 to XPL at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset World Liberty Financial USD (Solana) (USD1) Plasma (XPL)
Network Solana Plasma
Type SPL token Native coin
Contract USD1ttGY…zvEmuB -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) - ≈ 0.000042 XPL
Route Cross-chain: Solana to Plasma
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.37775 USD1
Account / ID Not needed to start a swap

How long the USD1 to XPL swap takes

The USD1 to XPL swap is three waits in a row: the Solana network confirms your deposit, the exchange partner swaps it, and the Plasma network delivers the payout. Solana produces blocks in slots of about 200 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USD1, and the order page moves from waiting to confirming once the deposit is found.

  2. Solana finalizes the deposit

    Once a block includes the deposit, Solana's Alpenglow consensus targets finality in roughly 150 milliseconds. A transaction that misses its blockhash window expires instead of waiting.

  3. Exchange and XPL payout

    The partner swaps the USD1 and sends XPL. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Plasma

    Your wallet lists the XPL as received once Plasma has confirmed the payout.

Your XPL address for the payout

A Plasma address is 0x followed by 40 hex characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An address for XPL on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving XPL on Plasma: address and memo

Memo or tagNot used on this network.

Send USD1 on the right network

On the sending side, send USD1 only on Solana, the network your order page names. USD1 sent on another network does not reach the deposit address. USD1 exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the XPL arrives

The payout is an ordinary Plasma transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Plasma and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts XPL on Plasma, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Plasma block explorer.

If your USD1 deposit is slow or stuck

Look up the transaction signature on a Solana explorer such as Solscan. By default, a Solana transaction expires if no block includes it within 150 blocks of the blockhash it was signed with, about 30 seconds at the current 200-millisecond slots, and after that it can never be processed.

A transaction the explorer marks as failed moved no coins but still cost its fee, and it stays failed. Send again only once the first attempt shows as failed, or has expired without your balance dropping; while it may still land, a second send could become a second deposit. A signed transaction's fee cannot be raised, so when blocks are busy, give the new attempt a higher priority fee, if your wallet lets you set one.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USD1 to XPL swap

Your deposit is public on Solana: anyone can look up the sending wallet, the deposit address, the amount and the fee in an explorer such as Solscan. The payout is recorded on Plasma too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Check that the sending wallet holds SOL for the fee besides the USD1 you send, before you create the order.
  • Copy your XPL address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USD1 to XPL Frequently Asked Questions

How do I swap USD1 to XPL?

Enter the USD1 amount and your XPL address in the form at the top, press Exchange Now, and send USD1 on Solana to the one-time deposit address on your order page. After the Solana network confirms the deposit, the exchange partner sends XPL to your address. No account or email is needed.

How much XPL do I get for 1 USD1?

Type 1 into the USD1 to XPL calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does USD1 to XPL take?

There is no set time: the Solana network confirms the deposit first, then the exchange partner swaps it and sends the XPL payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USD1 to XPL?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap World Liberty Financial USD to Plasma without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the XPL I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USD1 arrived than you entered.

How do I swap XPL back to USD1?

Use the XPL to USD1 page, linked next to the swap form. It works the same way in reverse: paste a Solana address, then send XPL to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps