Exchange Currencies Track Order Guides Telegram bot

Swap USD Coin (USDC) to LAB with no sign-up

Enter the USDC amount, paste a BNB Smart Chain address from your own wallet, then send USDC on Algorand to the one-time deposit address on your order page. Once the Algorand network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LAB on BNB Smart Chain straight to your address.

Swap LAB to USDC instead

Network Fee
-
Deposit Fee
-

Enter an address on the BNB Smart Chain (BEP-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDC to LAB exchange rate

The USDC to LAB rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

USDC to LAB Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDC Algorand ASA
You get (estimate)
LAB BNB Chain BEP-20
0
Rate
-
Value in USD
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 05:37 UTC
1 USDC price
$1.00
1 LAB price
$0.0332

How to swap USDC to LAB

  1. Copy your LAB address

    Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDC amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LAB estimate under it already has the payout fee taken out.

  3. Send USDC to the deposit address

    Press Exchange Now. Your order page shows a one-time Algorand deposit address: send the amount you entered in one transaction. Send from an Algorand wallet that keeps enough ALGO for the fee and the account's minimum balance after the deposit, or the transaction fails. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.

  4. Follow the order until LAB arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LAB is in your wallet.

What the USDC to LAB swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the Algorand network fee yourself, in ALGO, for ALGO and ASA transfers alike: it is the network minimum unless the network is congested, when it grows with the transaction's size in bytes. An ASA deposit such as USDC pays its network fee in ALGO, so the sending account needs ALGO above its minimum balance as well as the USDC.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LAB you get per USDC drops near the minimum.

USDC to LAB at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset USD Coin (Algorand) (USDC) LAB
Network Algorand BNB Smart Chain
Type ASA token BEP-20 token
Contract 31566704 0x7ec43C…25593A
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) - ≈ 0.1538 LAB
Route Cross-chain: Algorand to BNB Smart Chain
Rate Floating, estimate shown before you send
Account / ID Not needed to start a swap

How long the USDC to LAB swap takes

The USDC to LAB swap is three waits in a row: the Algorand network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. Algorand adds a block every few seconds, and a transaction is final as soon as a block includes it, because the network does not fork; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDC, and the order page moves from waiting to confirming once the deposit is found.

  2. Algorand adds it to a block

    The deposit is final as soon as a block includes it, usually a few seconds after your wallet sends it.

  3. Exchange and LAB payout

    The partner swaps the USDC and sends LAB. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on BNB Smart Chain

    Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.

Your LAB address for the payout

BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for LAB on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
  • A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving LAB on BNB Smart Chain: address and memo

Memo or tagNot used on this network.
Block explorerbscscan.com

More about swapping on BNB Smart Chain

Send USDC on the right network

On the sending side, send USDC only on Algorand, the network your order page names. USDC sent on another network does not reach the deposit address. USDC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the LAB arrives

The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the LAB later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this LAB stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.

If the address belongs to an exchange, check that the exchange credits LAB on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.

If your USDC deposit is slow or stuck

Look up the transaction ID on allo.info. An Algorand transaction is valid only between the first and last rounds your wallet set for it; after the last round the network rejects it, so one that never reached a block cannot go through later. A transaction that would leave the account below its minimum balance fails, so if your wallet shows an error, check that enough ALGO is left for the minimum balance and the fee.

If the order page showed a memo with the deposit address and you sent without it in your wallet's note field, the USDC reaches the deposit address but cannot be matched to your order on its own. Message support with your deposit's transaction ID instead of sending again. A memo with a typo cannot be matched either, so copy it from the order page rather than typing it.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDC to LAB swap

Your deposit is public: the sending and receiving addresses, the amount, the fee, any note and the time stay on the Algorand chain, where anyone can look them up on allo.info. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep the account's minimum balance and the fee in ALGO after the deposit, because Algorand rejects a transaction that would leave the balance below the minimum.
  • Copy your LAB address from the wallet's receive screen and compare its start and end after pasting.
  • Add the memo from the order page when you send USDC, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDC to LAB Frequently Asked Questions

How do I swap USDC to LAB?

Enter the USDC amount and your LAB address in the form at the top, press Exchange Now, and send USDC on Algorand to the one-time deposit address on your order page. After the Algorand network confirms the deposit, the exchange partner sends LAB on BNB Smart Chain to your address. No account or email is needed.

How much LAB do I get for 1 USDC?

Type 1 into the USDC to LAB calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does USDC to LAB take?

There is no set time: the Algorand network confirms the deposit first, then the exchange partner swaps it and sends the LAB payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDC to LAB?

Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap USD Coin to LAB without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap USDC to LAB?

For the deposit, yes: the order page shows a memo next to the deposit address, and your USDC must carry it to be matched to your order.

Why is the LAB I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDC arrived than you entered.

How do I swap LAB back to USDC?

Use the LAB to USDC page, linked next to the swap form. It works the same way in reverse: paste an Algorand address, then send LAB to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.

Guides for this swap

Related swaps

Popular swaps