Enter the USDC amount, paste your 0x address on Base from your own wallet, then send USDC on the Avalanche C-Chain to the one-time deposit address on your order page. Once the Avalanche C-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends B3 on Base straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDC to B3 rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
USDC to B3 Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDCAvalancheARC-20
You get (estimate)
B3BaseERC-20
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 05:49 UTC
1 USDC price
$1.00
How to swap USDC to B3
1
Copy your B3 address
Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDC amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The B3 estimate under it already has the payout fee taken out.
3
Send USDC to the deposit address
Press Exchange Now. Your order page shows a one-time Avalanche C-Chain deposit address: send the amount you entered in one transaction. Send from a wallet set to the Avalanche C-Chain that holds enough AVAX on the C-Chain for gas; AVAX on the X-Chain or P-Chain cannot pay it.
4
Follow the order until B3 arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the B3 is in your wallet.
What the USDC to B3 swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the C-Chain gas fee yourself, in AVAX: the gas charged, which is at least half the gas limit your wallet sets, times the base fee plus a tip, and both are burned. A token transfer runs the token's contract, so it uses more gas than a plain AVAX transfer, and that gas is paid in AVAX on the C-Chain. The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the B3 you get per USDC drops near the minimum.
USDC to B3 at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
USD Coin (AVAX C-CHAIN) (USDC)
B3
Network
Avalanche C-Chain
Base
Type
ARC-20 token
ERC-20 token
Contract
0xB97EF9…c48a6E
0xB3B32F…dDB3B3
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 4.039 USDC
-
Route
Cross-chain: Avalanche C-Chain to Base
Rate
Floating, estimate shown before you send
Account / ID
Not needed to start a swap
How long the USDC to B3 swap takes
The USDC to B3 swap is three waits in a row: the Avalanche C-Chain network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. A C-Chain transaction is final once Avalanche consensus accepts its block, in about a second, and accepted blocks are never reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDC, and the order page moves from waiting to confirming once the deposit is found.
2C-Chain consensus accepts the block
An accepted block is final. The node executes it after acceptance, so receipts and new balances appear once that is done.
3Exchange and B3 payout
The partner swaps the USDC and sends B3. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Base
Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.
Your B3 address for the payout
Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
On the sending side, send USDC only on the Avalanche C-Chain, the network your order page names. USDC sent on another network does not reach the deposit address. USDC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the B3 only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.
If your USDC deposit is slow or stuck
Look up the transaction hash on Snowtrace. A deposit that stays pending usually has a max fee below the base fee bound of the next block, which rises while the C-Chain is busier than its target, or it waits behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Snowtrace marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDC to B3 swap
Your deposit is public on the Avalanche C-Chain: your sending address, the deposit address, the amount and the fee show on Snowtrace, and they stay there. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
If your AVAX sits on the X-Chain or P-Chain, move it to the C-Chain in your wallet first, because only C-Chain AVAX pays C-Chain gas.
Copy your B3 address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDC to B3 Frequently Asked Questions
How do I swap USDC to B3?
Enter the USDC amount and your B3 address in the form at the top, press Exchange Now, and send USDC on the Avalanche C-Chain to the one-time deposit address on your order page. After the Avalanche C-Chain network confirms the deposit, the exchange partner sends B3 on Base to your address. No account or email is needed.
How much B3 do I get for 1 USDC?
Type 1 into the USDC to B3 calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does USDC to B3 take?
There is no set time: the Avalanche C-Chain network confirms the deposit first, then the exchange partner swaps it and sends the B3 payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDC to B3?
Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap USD Coin to B3 without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the B3 I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDC arrived than you entered.
How do I swap B3 back to USDC?
Use the B3 to USDC page, linked next to the swap form. It works the same way in reverse: paste an Avalanche C-Chain address, then send B3 to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.