Swap Ethena USDe (USDE) to Pump.fun (PUMP) with no sign-up
Enter the USDE amount, paste a Solana wallet address from your own wallet, then send USDE on Robinhood Chain to the one-time deposit address on your order page. Once the Robinhood Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends PUMP on Solana straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDE to PUMP rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDE amounts come to in PUMP after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
USDE to PUMP Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDERobinhood
You get (estimate)
PUMPSolanaSPL
Rate
1 USDE ≈ 375.404 PUMP
Value in USD
≈ $99.58
Network Fee
69.9349427 PUMP
USDE to PUMP conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 17, 2026 to Nov 22, 2026.
Highest426.847 PUMP
Lowest355.568 PUMP
Change, 5 days+20.05%
Date
Rate
1 USDE ≈ 426.847 PUMP
1 USDE ≈ 413.016 PUMP
1 USDE ≈ 388.618 PUMP
1 USDE ≈ 388.155 PUMP
1 USDE ≈ 369.114 PUMP
1 USDE ≈ 355.568 PUMP
Live Market SnapshotUpdated Nov 22, 2026 19:57 UTC
1 USDE price
$1.03
1 PUMP price
$0.0026526
1 USDE buys
375.40408718 PUMP
How to swap USDE to PUMP
1
Copy your PUMP address
Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDE amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The PUMP estimate under it already has the payout fee taken out.
3
Send USDE to the deposit address
Press Exchange Now. Your order page shows a one-time Robinhood Chain deposit address: send the amount you entered in one transaction. Send USDE from a wallet that holds it on Robinhood Chain and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until PUMP arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the PUMP is in your wallet.
What the USDE to PUMP swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. You pay the Robinhood Chain network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send. For a token, that fee is usually not paid in the token itself, so keep enough of the fee coin in the same wallet next to the USDE.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the PUMP you get per USDE drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDE to PUMP at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethena USDe (Robinhood) (USDE)
Pump.fun (PUMP)
Network
Robinhood Chain
Solana
Type
Token
SPL token
Contract
0x5d3a1f…52ef34
pumpCmXq…7H9Dfn
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.7371 USDE
≈ 77.25 PUMP
Route
Cross-chain: Robinhood Chain to Solana
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
2.021962 USDE
Account / ID
Not needed to start a swap
How long the USDE to PUMP swap takes
The USDE to PUMP swap is three waits in a row: the Robinhood Chain network confirms your deposit, the exchange partner swaps it, and the Solana network delivers the payout. The time Robinhood Chain needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDE, and the order page moves from waiting to confirming once the deposit is found.
2Robinhood Chain confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and PUMP payout
The partner swaps the USDE and sends PUMP. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Solana
Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the PUMP under your address.
Your PUMP address for the payout
A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.
On the sending side, send USDE only on Robinhood Chain, the network your order page names. USDE sent on another network does not reach the deposit address. USDE exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. PUMP arrives in a token account tied to your wallet address; if you have never held PUMP, the payout has to create that account, and your wallet needs no SOL to receive it.
If the address belongs to an exchange, check that it is the exchange's deposit address for PUMP on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.
If your USDE deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Robinhood Chain. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDE to PUMP swap
Your deposit is recorded on Robinhood Chain for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send USDE only on Robinhood Chain, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your PUMP address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDE to PUMP Frequently Asked Questions
How do I swap USDE to PUMP?
Enter the USDE amount and your PUMP address in the form at the top, press Exchange Now, and send USDE on Robinhood Chain to the one-time deposit address on your order page. After the Robinhood Chain network confirms the deposit, the exchange partner sends PUMP on Solana to your address. No account or email is needed.
How much PUMP do I get for 1 USDE?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDE to PUMP calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDE to PUMP take?
There is no set time: the Robinhood Chain network confirms the deposit first, then the exchange partner swaps it and sends the PUMP payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDE to PUMP?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethena USDe to Pump.fun without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the PUMP I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDE arrived than you entered.
How do I swap PUMP back to USDE?
Use the PUMP to USDE page, linked next to the swap form. It works the same way in reverse: paste a Robinhood Chain address, then send PUMP to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.