Exchange Currencies Track Order Guides Telegram bot

Swap Ethereum (ETH) to Cornucopias (COPI) with no sign-up

Enter the ETH amount, paste a BNB Smart Chain address from your own wallet, then send ETH on zkSync Era to the one-time deposit address on your order page. Once the zkSync Era network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends COPI on BNB Smart Chain straight to your address.

Swap COPI to ETH instead

Rate
1 ETH ≈ 1,255,834.2543 COPI
Network Fee
-
Deposit Fee
-

Enter an address on the BNB Smart Chain (BEP-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

ETH to COPI exchange rate

The ETH to COPI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several ETH amounts come to in COPI after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

ETH to COPI Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

ETH zkSync
You get (estimate)
COPI BNB Chain BEP-20
1,255,834.2543281 COPI
Rate
1 ETH ≈ 1,255,834 COPI
Value in USD
≈ $1,709.61
Network Fee
2.3075601 COPI

ETH to COPI conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
0.1 ETH≈ 125,344 COPI
0.5 ETH≈ 627,784 COPI
1 ETH≈ 1,255,834 COPI
5 ETH≈ 6,280,236 COPI
10 ETH≈ 12,560,737 COPI

ETH to COPI daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest1,359,521 COPI
Lowest1,317,933 COPI
Change, 6 days+1.34%
1,359,521 1,317,933
Nov 16, 2026Nov 22, 2026
DateRate
1 ETH ≈ 1,335,587 COPI
1 ETH ≈ 1,320,424 COPI
1 ETH ≈ 1,342,282 COPI
1 ETH ≈ 1,359,521 COPI
1 ETH ≈ 1,324,680 COPI
1 ETH ≈ 1,347,684 COPI
1 ETH ≈ 1,317,933 COPI
Live Market Snapshot Updated Nov 22, 2026 12:34 UTC
1 ETH price
$1,754.01
1 COPI price
$0.00136133
1 ETH buys
1255834.2543281 COPI

How to swap ETH to COPI

  1. Copy your COPI address

    Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the ETH amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The COPI estimate under it already has the payout fee taken out.

  3. Send ETH to the deposit address

    Press Exchange Now. Your order page shows a one-time zkSync Era deposit address: send the amount you entered in one transaction. Send from a wallet switched to zkSync Era that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until COPI arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the COPI is in your wallet.

What the ETH to COPI swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the zkSync Era network fee yourself in ETH on zkSync Era, for ETH and tokens alike, unless an app's paymaster covers it; the fee depends partly on Ethereum gas prices, and your wallet estimates it. When you send ETH, the fee comes out of the same ETH balance on zkSync Era, so the wallet needs the amount you entered plus the fee.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the COPI you get per ETH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

ETH to COPI at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Ethereum (ZkSync Era) (ETH) Cornucopias (COPI)
Network zkSync Era BNB Smart Chain
Type Native coin BEP-20 token
Contract - 0xfea292…3f936f
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.00021 ETH ≈ 2.422 COPI
Route Cross-chain: zkSync Era to BNB Smart Chain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.000466 ETH
Account / ID Not needed to start a swap

How long the ETH to COPI swap takes

The ETH to COPI swap is three waits in a row: the zkSync Era network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. zkSync Era makes a block about every second, and the sequencer confirms your deposit once one includes it. It is final only after its batch is proven and executed on Ethereum, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.

  2. A zkSync Era block includes it

    Its batch is then committed to Ethereum, proven, and executed after a security delay, which makes it final.

  3. Exchange and COPI payout

    The partner swaps the ETH and sends COPI. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on BNB Smart Chain

    Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.

Your COPI address for the payout

BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for COPI on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
  • A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving COPI on BNB Smart Chain: address and memo

Memo or tagNot used on this network.
Block explorerbscscan.com

More about swapping on BNB Smart Chain

Send ETH on the right network

On the sending side, send ETH only on zkSync Era, the network your order page names. ETH sent on another network does not reach the deposit address. ETH exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the COPI arrives

The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the COPI later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this COPI stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.

If the address belongs to an exchange, check that the exchange credits COPI on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.

If your ETH deposit is slow or stuck

Look up the transaction hash on explorer.zksync.io. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, on other chains built with the ZK Stack and on other EVM networks, but the order waits for a transfer on zkSync Era only.

If the transfer is not on the explorer, check that the wallet held enough ETH on zkSync Era for the fee: unless a paymaster covers it, an ordinary account pays the fee in ETH, so a token send needs ETH beside the token. zkSync Era has no priority fee, so raising the tip does not move a transaction ahead.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your ETH to COPI swap

Your deposit is public: the amount, your sending address and the deposit address show on explorer.zksync.io, and the resulting state changes are published to Ethereum. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to zkSync Era and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your COPI address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

ETH to COPI Frequently Asked Questions

How do I swap ETH to COPI?

Enter the ETH amount and your COPI address in the form at the top, press Exchange Now, and send ETH on zkSync Era to the one-time deposit address on your order page. After the zkSync Era network confirms the deposit, the exchange partner sends COPI on BNB Smart Chain to your address. No account or email is needed.

How much COPI do I get for 1 ETH?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH to COPI calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does ETH to COPI take?

There is no set time: the zkSync Era network confirms the deposit first, then the exchange partner swaps it and sends the COPI payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for ETH to COPI?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Ethereum to Cornucopias without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the COPI I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.

How do I swap COPI back to ETH?

Use the COPI to ETH page, linked next to the swap form. It works the same way in reverse: paste a zkSync Era address, then send COPI to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps