Enter the DAI amount, paste a TON wallet address from your own wallet, then send DAI on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The DAI to TON rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several DAI amounts come to in TON after fees. It is worked out from the page's latest quote and carries that quote's time.
DAI to TON Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
DAIEthereumERC-20
You get (estimate)
TONTON
Rate
1 DAI ≈ 0.954599 TON
Value in USD
≈ $99.29
Network Fee
0.0075 TON
DAI to TON conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 20, 2026 02:04 UTC
1 DAI price
$1.00
1 TON price
$1.04
1 DAI buys
0.95459932 TON
How to swap DAI to TON
1
Copy your TON address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the DAI amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The TON estimate under it already has the payout fee taken out.
3
Send DAI to the deposit address
Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.
4
Follow the order until TON arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the TON is in your wallet.
What the DAI to TON swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the TON you get per DAI drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
DAI to TON at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
DAI
Toncoin (TON)
Network
Ethereum
TON
Type
ERC-20 token
Native coin
Contract
0x6b1754…271d0f
-
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 19, 2026)
≈ 0.3703 DAI
≈ 0.0075 TON
Route
Cross-chain: Ethereum to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026)
0.9291582 DAI
Account / ID
Not needed to start a swap
How long the DAI to TON swap takes
The DAI to TON swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the DAI, and the order page moves from waiting to confirming once the deposit is found.
2Ethereum includes it in a block
Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.
3Exchange and TON payout
The partner swaps the DAI and sends TON. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the TON under your address once the transfer is in a block, and a masterchain block then makes it final.
Your TON address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. TON can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
Receiving TON on TON: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
This page pays TON. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send DAI only on Ethereum, the network your order page names. DAI sent on another network does not reach the deposit address.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. TON sent to a wallet that has never sent anything stays in its address, and your wallet app deploys the wallet contract with your first outgoing transfer, usually paying for that from the balance.
If the address belongs to an exchange, check that the exchange gives it for TON deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for TON, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your DAI deposit is slow or stuck
Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your DAI to TON swap
Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
Copy your TON address from the wallet's receive screen and compare its start and end after pasting.
Enter the memo your exchange gives you for TON, or the payout cannot be credited to your account.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
DAI to TON Frequently Asked Questions
How do I swap DAI to TON?
Enter the DAI amount and your TON address in the form at the top, press Exchange Now, and send DAI on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends TON to your address. No account or email is needed.
How much TON do I get for 1 DAI?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the DAI to TON calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does DAI to TON take?
There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the TON payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for DAI to TON?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Dai to Toncoin without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap DAI to TON?
For the payout, only if your TON address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Can I receive TON on another network?
Yes, through a different entry in the coin list, since this page pays TON. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the TON I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less DAI arrived than you entered.
How do I swap TON back to DAI?
Use the TON to DAI page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send TON to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.