Enter the ETH on Arbitrum One amount, paste your 0x address on zkSync Era from your own wallet, then send ETH on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ETH on zkSync Era straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
ETH on Arbitrum One to ETH on zkSync Era exchange rate
The ETH on Arbitrum One to ETH on zkSync Era rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several ETH on Arbitrum One amounts come to in ETH on zkSync Era after fees. It is worked out from the page's latest quote and carries that quote's time.
ETH (Arbitrum One) to ETH (zkSync Era) Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ETHArbitrum
You get (estimate)
ETHzkSync
Rate
1 ETH ≈ 0.976148 ETH
Value in USD
≈ $1,714.54
Network Fee
0.00021 ETH
ETH (Arbitrum One) to ETH (zkSync Era) conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 18:16 UTC
1 ETH price
$1,757.36
1 ETH price
$1,756.44
1 ETH buys
0.9761483 ETH
How to swap ETH (Arbitrum One) to ETH (zkSync Era)
1
Copy your ETH on zkSync Era address
Open your wallet with zkSync Era selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ETH on Arbitrum One amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ETH on zkSync Era estimate under it already has the payout fee taken out.
3
Send ETH on Arbitrum One to the deposit address
Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until ETH on zkSync Era arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ETH on zkSync Era is in your wallet.
What the ETH on Arbitrum One to ETH on zkSync Era swap costs
Two costs come out of the estimate before you see it: the exchange margin and the zkSync Era network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. When you send ETH, the fee normally comes out of the same ETH balance on Arbitrum One, so the wallet needs the amount you entered plus the fee.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ETH on zkSync Era you get per ETH on Arbitrum One drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
ETH to ETH at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethereum (Arbitrum) (ETH)
Ethereum (ZkSync Era) (ETH)
Network
Arbitrum One
zkSync Era
Type
Native coin
Native coin
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00006 ETH
≈ 0.00021 ETH
Route
Cross-chain: Arbitrum One to zkSync Era
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0005944 ETH
Account / ID
Not needed to start a swap
How long the ETH on Arbitrum One to ETH on zkSync Era swap takes
The ETH on Arbitrum One to ETH on zkSync Era swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the zkSync Era network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ETH on Arbitrum One, and the order page moves from waiting to confirming once the deposit is found.
2Arbitrum One sequences the deposit
The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.
3Exchange and ETH on zkSync Era payout
The partner swaps the ETH on Arbitrum One and sends ETH on zkSync Era. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on zkSync Era
Your wallet lists it once a zkSync Era block includes the transaction, as long as the wallet is set to zkSync Era.
Your ETH on zkSync Era address for the payout
A receiving address on zkSync Era is 0x followed by 40 hexadecimal characters. The swap form accepted that format in our checks. Do not paste an address from another network.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another network: the payout is sent on zkSync Era, a separate chain.
An address at a wallet or exchange that does not support zkSync Era, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on zkSync Era: getting a payout back then depends on deploying that wallet there.
A token contract address copied from explorer.zksync.io instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
This page pays ETH on zkSync Era. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send ETH on Arbitrum One only on Arbitrum One, the network your order page names. ETH on Arbitrum One sent on another network does not reach the deposit address.
The payout is a zkSync Era transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to zkSync Era. The network's docs say received assets can be used right away, while the batch holding the transfer is still on its way to final settlement on Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. zkSync Era holds each withdrawal for at least 3 hours as a security measure; after that, anyone can finalize it on Ethereum, which sends the funds to the recipient address there. ETH is the base token of zkSync Era and pays its fees, so the payout itself covers gas when you move it, or anything else on zkSync Era, later.
If the address belongs to an exchange, check that it accepts this coin on zkSync Era and what its minimum deposit is; for a token, check the contract the exchange lists for zkSync Era, since a token's contract there always differs from its Ethereum one. To check the payout yourself, open the payout hash from the order page in a zkSync Era explorer such as explorer.zksync.io.
If your ETH on Arbitrum One deposit is slow or stuck
Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.
Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ETH on Arbitrum One to ETH on zkSync Era swap
Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount and your receiving address are public on explorer.zksync.io, where anyone who knows the address can see its whole history on zkSync Era. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
Copy your ETH on zkSync Era address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
ETH to ETH Frequently Asked Questions
How do I swap ETH on Arbitrum One to ETH on zkSync Era?
Enter the ETH on Arbitrum One amount and your ETH on zkSync Era address in the form at the top, press Exchange Now, and send ETH on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends ETH on zkSync Era to your address. No account or email is needed.
How much ETH on zkSync Era do I get for 1 ETH on Arbitrum One?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH on Arbitrum One to ETH on zkSync Era calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does ETH on Arbitrum One to ETH on zkSync Era take?
There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the ETH on zkSync Era payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ETH on Arbitrum One to ETH on zkSync Era?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethereum to Ethereum without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the ETH on zkSync Era I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH on Arbitrum One arrived than you entered.
How do I swap ETH on zkSync Era back to ETH on Arbitrum One?
Use the ETH on zkSync Era to ETH on Arbitrum One page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send ETH on zkSync Era to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.