Exchange Currencies Track Order Guides Telegram bot

Swap USD Coin (USDC) to Pulsechain (PLS) with no sign-up

Enter the USDC amount, paste your PulseChain address from your own wallet, then send USDC on Base to the one-time deposit address on your order page. Once the Base network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends PLS on PulseChain straight to your address.

Swap PLS to USDC instead

Rate
1 USDC ≈ 189,741.6158 PLS
Network Fee
-
Deposit Fee
-

Enter an address on the PulseChain network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDC to PLS exchange rate

The USDC to PLS rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several USDC amounts come to in PLS after fees. It is worked out from the page's latest quote and carries that quote's time.

USDC to PLS Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDC Base ERC-20
You get (estimate)
PLS PulseChain
189,741.6158219 PLS
Rate
1 USDC ≈ 189,742 PLS
Network Fee
9000 PLS

USDC to PLS conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 USDC≈ 20,015,840 PLS
500 USDC≈ 100,121,288 PLS
1,000 USDC≈ 200,253,097 PLS
5,000 USDC≈ 1,001,307,575 PLS
10,000 USDC≈ 2,002,625,671 PLS
50,000 USDC≈ 10,013,170,440 PLS
Live Market Snapshot Updated Nov 22, 2026 08:00 UTC
1 USDC price
$1.00
1 USDC buys
189741.6158219 PLS

How to swap USDC to PLS

  1. Copy your PLS address

    Open your wallet's receive screen for PLS on PulseChain and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDC amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The PLS estimate under it already has the payout fee taken out.

  3. Send USDC to the deposit address

    Press Exchange Now. Your order page shows a one-time Base deposit address: send the amount you entered in one transaction. Send from a wallet switched to Base that holds some ETH on Base for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until PLS arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the PLS is in your wallet.

What the USDC to PLS swap costs

Two costs come out of the estimate before you see it: the exchange margin and the PulseChain network fee for your payout. You pay the Base network fee yourself, and Base charges it in ETH, for ETH and tokens alike: an execution fee on Base plus a fee for publishing the transaction to Ethereum, which your wallet estimates. Sending USDC on Base still costs gas, charged in ETH on Base, so most wallets need some ETH there as well as the USDC.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the PLS you get per USDC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USDC to PLS at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset USD Coin (Base) (USDC) Pulsechain (PLS) (PLS)
Network Base PulseChain
Type ERC-20 token Native coin
Contract 0x833589…A02913 -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.0076 USDC -
Route Cross-chain: Base to PulseChain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.096748 USDC
Account / ID Not needed to start a swap

How long the USDC to PLS swap takes

The USDC to PLS swap is three waits in a row: the Base network confirms your deposit, the exchange partner swaps it, and the PulseChain network delivers the payout. Base builds a block every 200 milliseconds, and your deposit gets its first confirmation when one includes it. It becomes final once the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDC, and the order page moves from waiting to confirming once the deposit is found.

  2. A Base block includes it

    A maximum fee below the current base fee, or an older pending transaction from your account, can hold it back.

  3. Exchange and PLS payout

    The partner swaps the USDC and sends PLS. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on PulseChain

    Your wallet lists the PLS as received once PulseChain has confirmed the payout.

Your PLS address for the payout

A PulseChain receiving address is 0x followed by 40 hexadecimal characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An address for PLS on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving PLS on PulseChain: address and memo

Memo or tagNot used on this network.
Block explorerscan.pulsechain.com

Send USDC on the right network

On the sending side, send USDC only on Base, the network your order page names. USDC sent on another network does not reach the deposit address. USDC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the PLS arrives

The payout is an ordinary PulseChain transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to PulseChain and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts PLS on PulseChain, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a PulseChain block explorer.

If your USDC deposit is slow or stuck

Look up the transaction hash on Basescan. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, OP Mainnet and other EVM networks, but the order waits for a transfer on Base only. While Base throttles transactions to manage its data posting to Ethereum, even ones with a high priority fee can be delayed.

If your wallet still shows the deposit as pending, its maximum fee may be below the current base fee, its priority fee may be too low while demand is high, or an older pending transaction from your address may be holding it back. If your wallet offers speed up, use it on the oldest pending one: it sends a replacement with the same nonce and a higher fee. The replacement has a new hash, so give that one to support.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDC to PLS swap

Your deposit is public: the amount, your sending address and the deposit address show on Basescan, and the transaction is also published to Ethereum. The payout is recorded on PulseChain too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Base and keep some ETH on Base for gas before you send, even when the deposit is a token.
  • Copy your PLS address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDC to PLS Frequently Asked Questions

How do I swap USDC to PLS?

Enter the USDC amount and your PLS address in the form at the top, press Exchange Now, and send USDC on Base to the one-time deposit address on your order page. After the Base network confirms the deposit, the exchange partner sends PLS on PulseChain to your address. No account or email is needed.

How much PLS do I get for 1 USDC?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDC to PLS calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does USDC to PLS take?

There is no set time: the Base network confirms the deposit first, then the exchange partner swaps it and sends the PLS payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDC to PLS?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap USD Coin to Pulsechain without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the PLS I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDC arrived than you entered.

How do I swap PLS back to USDC?

Use the PLS to USDC page, linked next to the swap form. It works the same way in reverse: paste a Base address, then send PLS to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps