Swap Tether (USDT) to o1.exchange (O) with no sign-up
Enter the USDT amount, paste your 0x address on Base from your own wallet, then send USDT on the Avalanche C-Chain to the one-time deposit address on your order page. Once the Avalanche C-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends O on Base straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDT to O rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in O after fees. It is worked out from the page's latest quote and carries that quote's time.
USDT to O Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDTAvalancheARC-20
You get (estimate)
OBaseERC-20
Rate
1 USDT ≈ 1.54258 O
Value in USD
≈ $97.35
Network Fee
0.006637 O
USDT to O conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 16:58 UTC
1 USDT price
$1.00
1 O price
$0.6311
1 USDT buys
1.5425797 O
How to swap USDT to O
1
Copy your O address
Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDT amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The O estimate under it already has the payout fee taken out.
3
Send USDT to the deposit address
Press Exchange Now. Your order page shows a one-time Avalanche C-Chain deposit address: send the amount you entered in one transaction. Send from a wallet set to the Avalanche C-Chain that holds enough AVAX on the C-Chain for gas; AVAX on the X-Chain or P-Chain cannot pay it.
4
Follow the order until O arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the O is in your wallet.
What the USDT to O swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the C-Chain gas fee yourself, in AVAX: the gas charged, which is at least half the gas limit your wallet sets, times the base fee plus a tip, and both are burned. A token transfer runs the token's contract, so it uses more gas than a plain AVAX transfer, and that gas is paid in AVAX on the C-Chain.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the O you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDT to O at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Tether (AVAX C-CHAIN) (USDT)
o1.exchange (O)
Network
Avalanche C-Chain
Base
Type
ARC-20 token
ERC-20 token
Contract
0x970223…F4A8c7
0x182FA6…4620b2
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 3.06 USDT
≈ 0.006637 O
Route
Cross-chain: Avalanche C-Chain to Base
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
6.89357 USDT
Account / ID
Not needed to start a swap
How long the USDT to O swap takes
The USDT to O swap is three waits in a row: the Avalanche C-Chain network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. A C-Chain transaction is final once Avalanche consensus accepts its block, in about a second, and accepted blocks are never reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.
2C-Chain consensus accepts the block
An accepted block is final. The node executes it after acceptance, so receipts and new balances appear once that is done.
3Exchange and O payout
The partner swaps the USDT and sends O. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Base
Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.
Your O address for the payout
Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
On the sending side, send USDT only on the Avalanche C-Chain, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the O only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.
If your USDT deposit is slow or stuck
Look up the transaction hash on Snowtrace. A deposit that stays pending usually has a max fee below the base fee bound of the next block, which rises while the C-Chain is busier than its target, or it waits behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Snowtrace marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDT to O swap
Your deposit is public on the Avalanche C-Chain: your sending address, the deposit address, the amount and the fee show on Snowtrace, and they stay there. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
If your AVAX sits on the X-Chain or P-Chain, move it to the C-Chain in your wallet first, because only C-Chain AVAX pays C-Chain gas.
Copy your O address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDT to O Frequently Asked Questions
How do I swap USDT to O?
Enter the USDT amount and your O address in the form at the top, press Exchange Now, and send USDT on the Avalanche C-Chain to the one-time deposit address on your order page. After the Avalanche C-Chain network confirms the deposit, the exchange partner sends O on Base to your address. No account or email is needed.
How much O do I get for 1 USDT?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to O calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDT to O take?
There is no set time: the Avalanche C-Chain network confirms the deposit first, then the exchange partner swaps it and sends the O payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDT to O?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Tether to o1.exchange without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the O I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.
How do I swap O back to USDT?
Use the O to USDT page, linked next to the swap form. It works the same way in reverse: paste an Avalanche C-Chain address, then send O to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.