Swap Tether USD (USDT) to Audiera (BEAT) with no sign-up
Enter the USDT amount, paste a BNB Smart Chain address from your own wallet, then send USDT on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BEAT on BNB Smart Chain straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDT to BEAT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in BEAT after fees. It is worked out from the page's latest quote and carries that quote's time.
USDT to BEAT Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDTTONJetton
You get (estimate)
BEATBNB ChainBEP-20
Rate
1 USDT ≈ 13.2629 BEAT
Value in USD
≈ $99.61
Network Fee
0.5982362 BEAT
USDT to BEAT conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 16:17 UTC
1 USDT price
$1.00
1 BEAT price
$0.0751
1 USDT buys
13.26288466 BEAT
How to swap USDT to BEAT
1
Copy your BEAT address
Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDT amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BEAT estimate under it already has the payout fee taken out.
3
Send USDT to the deposit address
Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.
4
Follow the order until BEAT arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BEAT is in your wallet.
What the USDT to BEAT swap costs
Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as USDT also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BEAT you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDT to BEAT at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Tether USD (TON) (USDT)
Audiera (BEAT)
Network
TON
BNB Smart Chain
Type
Jetton token
BEP-20 token
Contract
EQCxE6mU…Id_sDs
0xcf3232…8A3E36
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.06627 USDT
≈ 0.6022 BEAT
Route
Cross-chain: TON to BNB Smart Chain
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.24489 USDT
Account / ID
Not needed to start a swap
How long the USDT to BEAT swap takes
The USDT to BEAT swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.
2Masterchain block makes it final
A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.
3Exchange and BEAT payout
The partner swaps the USDT and sends BEAT. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on BNB Smart Chain
Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.
Your BEAT address for the payout
BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for BEAT on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.
Receiving BEAT on BNB Smart Chain: address and memo
On the sending side, send USDT only on TON, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the BEAT later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this BEAT stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.
If the address belongs to an exchange, check that the exchange credits BEAT on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.
If your USDT deposit is slow or stuck
A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.
If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDT to BEAT swap
Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
Copy your BEAT address from the wallet's receive screen and compare its start and end after pasting.
If the order page shows a memo with the deposit address, add it when you send USDT, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDT to BEAT Frequently Asked Questions
How do I swap USDT to BEAT?
Enter the USDT amount and your BEAT address in the form at the top, press Exchange Now, and send USDT on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends BEAT on BNB Smart Chain to your address. No account or email is needed.
How much BEAT do I get for 1 USDT?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to BEAT calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDT to BEAT take?
There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the BEAT payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDT to BEAT?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Tether USD to Audiera without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap USDT to BEAT?
For the deposit, only if the order page shows a memo next to the deposit address: your USDT must then carry it to be matched to your order.
Why is the BEAT I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.
How do I swap BEAT back to USDT?
Use the BEAT to USDT page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send BEAT to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.