Exchange Currencies Track Order Guides Telegram bot

Swap Tether USD (USDT) to Osmosis (OSMO) with no sign-up

Enter the USDT amount, paste your Osmosis address from your own wallet, then send USDT on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends OSMO straight to your address.

Swap OSMO to USDT instead

Network Fee
-
Deposit Fee
-

Enter an address on the Osmosis network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDT to OSMO exchange rate

The USDT to OSMO rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

USDT to OSMO Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDT TON Jetton
You get (estimate)
OSMO Osmosis
0
Rate
-
Value in USD
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 13:44 UTC
1 USDT price
$1.00
1 OSMO price
$0.0336

How to swap USDT to OSMO

  1. Copy your OSMO address

    Open your wallet's receive screen for OSMO on Osmosis and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the USDT amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The OSMO estimate under it already has the payout fee taken out.

  3. Send USDT to the deposit address

    Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.

  4. Follow the order until OSMO arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the OSMO is in your wallet.

What the USDT to OSMO swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Osmosis network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as USDT also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the OSMO you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USDT to OSMO at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Tether USD (TON) (USDT) Osmosis (OSMO)
Network TON Osmosis
Type Jetton token Native coin
Contract EQCxE6mU…Id_sDs -
Memo / tag Include the memo shown on your order page Required with your address
Network fee (typical, checked Nov 22, 2026) ≈ 0.06627 USDT -
Route Cross-chain: TON to Osmosis
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.150518 USDT
Account / ID Not needed to start a swap

How long the USDT to OSMO swap takes

The USDT to OSMO swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Osmosis network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.

  2. Masterchain block makes it final

    A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.

  3. Exchange and OSMO payout

    The partner swaps the USDT and sends OSMO. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Osmosis

    Your wallet lists the OSMO as received once Osmosis has confirmed the payout.

Your OSMO address for the payout

An Osmosis receiving address is bech32 text that starts with osmo1. The swap form accepted osmo1 addresses in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. OSMO can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • An address for OSMO on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving OSMO on Osmosis: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerwww.mintscan.io

Send USDT on the right network

On the sending side, send USDT only on TON, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the OSMO arrives

The payout is an ordinary Osmosis transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Osmosis and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts OSMO on Osmosis, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in an Osmosis block explorer.

If your USDT deposit is slow or stuck

A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.

If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDT to OSMO swap

Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout is recorded on Osmosis too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
  • Copy your OSMO address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for OSMO, or the payout cannot be credited to your account.
  • If the order page shows a memo with the deposit address, add it when you send USDT, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDT to OSMO Frequently Asked Questions

How do I swap USDT to OSMO?

Enter the USDT amount and your OSMO address in the form at the top, press Exchange Now, and send USDT on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends OSMO to your address. No account or email is needed.

How much OSMO do I get for 1 USDT?

Type 1 into the USDT to OSMO calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does USDT to OSMO take?

There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the OSMO payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDT to OSMO?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Tether USD to Osmosis without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap USDT to OSMO?

For the payout, only if your OSMO address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none. For the deposit, only if the order page shows a memo next to the deposit address: your USDT must then carry it to be matched to your order.

Why is the OSMO I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.

How do I swap OSMO back to USDT?

Use the OSMO to USDT page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send OSMO to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps