Exchange Currencies Track Order Guides Telegram bot

Swap Stellar (XLM) to Pulsechain (PLS) with no sign-up

Enter the XLM amount, paste your PulseChain address from your own wallet, then send XLM to the one-time deposit address on your order page. Once the Stellar network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends PLS on PulseChain straight to your address.

Swap PLS to XLM instead

Rate
1 XLM ≈ 15,705.8809 PLS
Network Fee
-
Deposit Fee
-

Enter an address on the PulseChain network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

XLM to PLS exchange rate

The XLM to PLS rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several XLM amounts come to in PLS after fees. It is worked out from the page's latest quote and carries that quote's time.

XLM to PLS Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

XLM Stellar
You get (estimate)
PLS PulseChain
15,705.880918 PLS
Rate
1 XLM ≈ 15,705.9 PLS
Network Fee
9000 PLS

XLM to PLS conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000 XLM≈ 24,696,881 PLS
5,000 XLM≈ 123,520,405 PLS
10,000 XLM≈ 247,049,809 PLS
50,000 XLM≈ 1,235,285,046 PLS
100,000 XLM≈ 2,470,579,092 PLS
Live Market Snapshot Updated Nov 22, 2026 12:29 UTC
1 XLM price
$0.1332
1 XLM buys
15705.880918 PLS

How to swap XLM to PLS

  1. Copy your PLS address

    Open your wallet's receive screen for PLS on PulseChain and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the XLM amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The PLS estimate under it already has the payout fee taken out.

  3. Send XLM to the deposit address

    Press Exchange Now. Your order page shows a one-time Stellar deposit address: send the amount you entered in one transaction. Send from a Stellar wallet whose balance covers the amount and still leaves the fee and the account's minimum balance in XLM. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.

  4. Follow the order until PLS arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the PLS is in your wallet.

What the XLM to PLS swap costs

Two costs come out of the estimate before you see it: the exchange margin and the PulseChain network fee for your payout. You pay the Stellar network fee yourself, in XLM: your wallet sets the most it will pay per operation, and when the network is quiet you are charged only the network minimum.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the PLS you get per XLM drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

XLM to PLS at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Stellar (XLM) Pulsechain (PLS) (PLS)
Network Stellar PulseChain
Type Native coin Native coin
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) None listed -
Route Cross-chain: Stellar to PulseChain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.6372678 XLM
Account / ID Not needed to start a swap

How long the XLM to PLS swap takes

The XLM to PLS swap is three waits in a row: the Stellar network confirms your deposit, the exchange partner swaps it, and the PulseChain network delivers the payout. Stellar closes a new ledger every few seconds, and a payment in a closed ledger is final and cannot be reversed; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the XLM, and the order page moves from waiting to confirming once the deposit is found.

  2. Stellar closes the ledger

    In busy periods transactions with higher fee bids get into a ledger first, so a low bid can wait longer or be dropped.

  3. Exchange and PLS payout

    The partner swaps the XLM and sends PLS. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on PulseChain

    Your wallet lists the PLS as received once PulseChain has confirmed the payout.

Your PLS address for the payout

A PulseChain receiving address is 0x followed by 40 hexadecimal characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An address for PLS on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving PLS on PulseChain: address and memo

Memo or tagNot used on this network.
Block explorerscan.pulsechain.com

After the PLS arrives

The payout is an ordinary PulseChain transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to PulseChain and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts PLS on PulseChain, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a PulseChain block explorer.

If your XLM deposit is slow or stuck

Look up the transaction hash on stellar.expert. In busy periods Stellar includes the highest fee bids first, so a transaction with a low bid can be pushed to later ledgers or dropped. A payment that would take the account's XLM below its minimum balance fails. A dropped or failed transaction delivers nothing to the deposit address, so wait until your wallet reports the first attempt as failed or expired before you send again.

If the order page showed a memo and your deposit went out without it, the payment reaches the deposit account but cannot be matched to your order on its own. Message support with the transaction hash instead of sending again. Some wallets refuse to send a payment without a memo to an account that marks memos as required; add the memo from the order page and send.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your XLM to PLS swap

Your deposit is public: the sending account, the deposit account, the amount, any memo and the time stay in the Stellar ledger, where anyone can look them up on stellar.expert. The payout is recorded on PulseChain too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep enough XLM for the fee and the account's minimum balance after the deposit, because Stellar fails a payment that would go below the minimum.
  • Copy your PLS address from the wallet's receive screen and compare its start and end after pasting.
  • Add the memo from the order page when you send XLM, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

XLM to PLS Frequently Asked Questions

How do I swap XLM to PLS?

Enter the XLM amount and your PLS address in the form at the top, press Exchange Now, and send XLM to the one-time deposit address on your order page. After the Stellar network confirms the deposit, the exchange partner sends PLS on PulseChain to your address. No account or email is needed.

How much PLS do I get for 1 XLM?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the XLM to PLS calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does XLM to PLS take?

There is no set time: the Stellar network confirms the deposit first, then the exchange partner swaps it and sends the PLS payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for XLM to PLS?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Stellar to Pulsechain without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap XLM to PLS?

For the deposit, yes: the order page shows a memo next to the deposit address, and your XLM must carry it to be matched to your order.

Why is the PLS I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XLM arrived than you entered.

How do I swap PLS back to XLM?

Use the PLS to XLM page, linked next to the swap form. It works the same way in reverse: paste a Stellar address, then send PLS to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps