Enter the XLM amount, paste a Tezos tz1 address from your own wallet, then send XLM to the one-time deposit address on your order page. Once the Stellar network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XTZ straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The XLM to XTZ rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several XLM amounts come to in XTZ after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
XLM to XTZ Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
XLMStellar
You get (estimate)
XTZTezos
Rate
1 XLM ≈ 0.645874 XTZ
Value in USD
≈ $94.03
Network Fee
0.005 XTZ
XLM to XTZ conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 11, 2026 to Nov 20, 2026.
Highest0.666828 XTZ
Lowest0.625096 XTZ
Change, 9 days+5.42%
Date
Rate
1 XLM ≈ 0.658986 XTZ
1 XLM ≈ 0.664409 XTZ
1 XLM ≈ 0.666828 XTZ
1 XLM ≈ 0.64354 XTZ
1 XLM ≈ 0.648733 XTZ
1 XLM ≈ 0.625096 XTZ
Live Market SnapshotUpdated Nov 20, 2026 01:51 UTC
1 XLM price
$0.1372
1 XTZ price
$0.2080
1 XLM buys
0.64587365 XTZ
How to swap XLM to XTZ
1
Copy your XTZ address
Open your Tezos wallet's receive screen and copy the account address; it starts with tz1, the only kind the form accepts. Paste it into Recipient Address and compare the first and last characters.
2
Enter the XLM amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XTZ estimate under it already has the payout fee taken out.
3
Send XLM to the deposit address
Press Exchange Now. Your order page shows a one-time Stellar deposit address: send the amount you entered in one transaction. Send from a Stellar wallet whose balance covers the amount and still leaves the fee and the account's minimum balance in XLM. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.
4
Follow the order until XTZ arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XTZ is in your wallet.
What the XLM to XTZ swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Tezos network fee for your payout. You pay the Stellar network fee yourself, in XLM: your wallet sets the most it will pay per operation, and when the network is quiet you are charged only the network minimum.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XTZ you get per XLM drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
XLM to XTZ at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Stellar (XLM)
Tezos (XTZ)
Network
Stellar
Tezos
Type
Native coin
Native coin
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 19, 2026)
None listed
≈ 0.005 XTZ
Route
Cross-chain: Stellar to Tezos
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026)
0.0165834 XLM
Account / ID
Not needed to start a swap
How long the XLM to XTZ swap takes
The XLM to XTZ swap is three waits in a row: the Stellar network confirms your deposit, the exchange partner swaps it, and the Tezos network delivers the payout. Stellar closes a new ledger every few seconds, and a payment in a closed ledger is final and cannot be reversed; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the XLM, and the order page moves from waiting to confirming once the deposit is found.
2Stellar closes the ledger
In busy periods transactions with higher fee bids get into a ledger first, so a low bid can wait longer or be dropped.
3Exchange and XTZ payout
The partner swaps the XLM and sends XTZ. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Tezos
Your wallet shows the XTZ once a block includes the transfer, and one more block on top makes it final.
Your XTZ address for the payout
A Tezos address is 36 characters of base58. Wallet accounts start with tz1, tz2, tz3 or tz4, and smart contracts start with KT1. The swap form accepts tz1 addresses and does not accept the other prefixes, so give a tz1 account for the payout.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An Etherlink 0x address: Etherlink is a separate EVM layer reached by a bridge, and this listing pays tez only to tz1 accounts on Tezos layer 1.
A tz1 address copied from an explorer, a baker list or someone else's transfer: the payout goes to whoever holds that account.
This page pays XTZ. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is an ordinary Tezos transfer to your account, and an account that has never been used receives it like any other. Blocks come every 6 seconds under normal conditions, and the transfer counts as final once one more block is on top of the block that holds it.
If the account has never sent anything, your wallet adds a reveal operation to its first transfer, which publishes the account's public key; the protocol needs that key before it accepts the account's own operations. The reveal happens once per account and carries its own fee in tez, so leave a little tez in the account.
If the address belongs to an exchange, check that it credits XTZ sent on Tezos layer 1 rather than on Etherlink or BNB Smart Chain, and what its minimum deposit is. To check the payout yourself, open the payout hash from the order page in a Tezos explorer such as TzKT.
If your XLM deposit is slow or stuck
Look up the transaction hash on stellar.expert. In busy periods Stellar includes the highest fee bids first, so a transaction with a low bid can be pushed to later ledgers or dropped. A payment that would take the account's XLM below its minimum balance fails. A dropped or failed transaction delivers nothing to the deposit address, so wait until your wallet reports the first attempt as failed or expired before you send again.
If the order page showed a memo and your deposit went out without it, the payment reaches the deposit account but cannot be matched to your order on its own. Message support with the transaction hash instead of sending again. Some wallets refuse to send a payment without a memo to an account that marks memos as required; add the memo from the order page and send.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your XLM to XTZ swap
Your deposit is public: the sending account, the deposit account, the amount, any memo and the time stay in the Stellar ledger, where anyone can look them up on stellar.expert. Anyone can see the payout, its amount and your tz1 address on a Tezos explorer such as TzKT, together with the account's earlier and later activity. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Keep enough XLM for the fee and the account's minimum balance after the deposit, because Stellar fails a payment that would go below the minimum.
Copy your XTZ address from the wallet's receive screen and compare its start and end after pasting.
Add the memo from the order page when you send XLM, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
XLM to XTZ Frequently Asked Questions
How do I swap XLM to XTZ?
Enter the XLM amount and your XTZ address in the form at the top, press Exchange Now, and send XLM to the one-time deposit address on your order page. After the Stellar network confirms the deposit, the exchange partner sends XTZ to your address. No account or email is needed.
How much XTZ do I get for 1 XLM?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the XLM to XTZ calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does XLM to XTZ take?
There is no set time: the Stellar network confirms the deposit first, then the exchange partner swaps it and sends the XTZ payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for XLM to XTZ?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Stellar to Tezos without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap XLM to XTZ?
For the deposit, yes: the order page shows a memo next to the deposit address, and your XLM must carry it to be matched to your order.
Can I receive XTZ on another network?
Yes, through a different entry in the coin list, since this page pays XTZ. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the XTZ I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XLM arrived than you entered.
How do I swap XTZ back to XLM?
Use the XTZ to XLM page, linked next to the swap form. It works the same way in reverse: paste a Stellar address, then send XTZ to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.