Exchange Currencies Track Order Guides Telegram bot

Swap Tether (USDT) to Flare (FLR) with no sign-up

Enter the USDT amount, paste your Flare address from your own wallet, then send USDT on Aptos to the one-time deposit address on your order page. Once the Aptos network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends FLR straight to your address.

Swap FLR to USDT instead

Rate
1 USDT ≈ 191.9501 FLR
Network Fee
-
Deposit Fee
-

Enter an address on the Flare network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDT to FLR exchange rate

The USDT to FLR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in FLR after fees. It is worked out from the page's latest quote and carries that quote's time.

USDT to FLR Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDT Aptos Fungible Asset
You get (estimate)
FLR Flare
19,195.0093198 FLR
Rate
1 USDT ≈ 191.95 FLR
Value in USD
≈ $100.25
Network Fee
0.105 FLR

USDT to FLR conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 USDT≈ 19,195 FLR
500 USDT≈ 95,983.9 FLR
1,000 USDT≈ 191,970 FLR
5,000 USDT≈ 959,859 FLR
10,000 USDT≈ 1,919,720 FLR
50,000 USDT≈ 9,598,611 FLR
Live Market Snapshot Updated Nov 22, 2026 13:44 UTC
1 USDT price
$1.00
1 FLR price
$0.00522246
1 USDT buys
191.9500932 FLR

How to swap USDT to FLR

  1. Copy your FLR address

    Open your wallet's receive screen for FLR on Flare and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDT amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The FLR estimate under it already has the payout fee taken out.

  3. Send USDT to the deposit address

    Press Exchange Now. Your order page shows a one-time Aptos deposit address: send the amount you entered in one transaction. Send USDT from your Aptos wallet and leave some APT in the account, because the gas for the transfer is paid in APT.

  4. Follow the order until FLR arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the FLR is in your wallet.

What the USDT to FLR swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Flare network fee for your payout. You normally pay the Aptos gas yourself, in APT: your wallet sets a gas unit price, which can rise under load, and a maximum amount of gas, and the fee does not depend on the amount you send. If the deposit address has never held this token, your transfer also pays a one-time storage fee in APT for the new store that holds it.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the FLR you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USDT to FLR at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Tether (Aptos) (USDT) Flare (FLR)
Network Aptos Flare
Type Fungible Asset token Native coin
Contract 0x357b0b…c9dc2b -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.011 USDT ≈ 0.105 FLR
Route Cross-chain: Aptos to Flare
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.025418 USDT
Account / ID Not needed to start a swap

How long the USDT to FLR swap takes

The USDT to FLR swap is three waits in a row: the Aptos network confirms your deposit, the exchange partner swaps it, and the Flare network delivers the payout. Aptos has no fixed block interval, and a transaction is final as soon as it commits, since its BFT consensus allows no rollback; the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.

  2. Aptos commits it

    A committed transaction is final at once; one that aborted is final too, but moved no coins.

  3. Exchange and FLR payout

    The partner swaps the USDT and sends FLR. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Flare

    Your wallet lists the FLR as received once Flare has confirmed the payout.

Your FLR address for the payout

A Flare address is 0x followed by 40 hex characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An address for FLR on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving FLR on Flare: address and memo

Memo or tagNot used on this network.
Block explorerflare-explorer.flare.network

Send USDT on the right network

On the sending side, send USDT only on Aptos, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the FLR arrives

The payout is an ordinary Flare transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Flare and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts FLR on Flare, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Flare block explorer.

If your USDT deposit is slow or stuck

If the order still says waiting, look up the transaction hash from your wallet on the Aptos Explorer. A transaction that committed but aborted is final too: the gas was charged and the USDT did not move. One that was discarded before it ran, for example after a timeout or because the account could no longer cover the gas, may leave no trace on chain, and nothing left your account.

A wallet transaction usually carries a sequence number that must match your account's next one, so an earlier send from the same account that has not committed holds the next one back. Every transaction also has an expiration time, after which it can no longer commit; send a new transfer only after your wallet reports the first as expired or failed and the order page still shows waiting.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDT to FLR swap

Anyone can look up your deposit on the Aptos Explorer: the transaction shows your account address, the deposit address, the asset and the amount, and it stays on chain. The payout is recorded on Flare too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave some APT in your Aptos account beyond the deposit, because the gas is paid in APT even when you send a token.
  • Copy your FLR address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDT to FLR Frequently Asked Questions

How do I swap USDT to FLR?

Enter the USDT amount and your FLR address in the form at the top, press Exchange Now, and send USDT on Aptos to the one-time deposit address on your order page. After the Aptos network confirms the deposit, the exchange partner sends FLR to your address. No account or email is needed.

How much FLR do I get for 1 USDT?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to FLR calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does USDT to FLR take?

There is no set time: the Aptos network confirms the deposit first, then the exchange partner swaps it and sends the FLR payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDT to FLR?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Tether to Flare without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the FLR I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.

How do I swap FLR back to USDT?

Use the FLR to USDT page, linked next to the swap form. It works the same way in reverse: paste an Aptos address, then send FLR to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps