Swap Tether (USDT) to Klever (KLV) with no sign-up
Enter the USDT amount, paste your KLV address from your own wallet, then send USDT on the Avalanche C-Chain to the one-time deposit address on your order page. Once the Avalanche C-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends KLV straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDT to KLV rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in KLV after fees. It is worked out from the page's latest quote and carries that quote's time.
USDT to KLV Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDTAvalancheARC-20
You get (estimate)
KLVKLV
Rate
1 USDT ≈ 2,180.77 KLV
Value in USD
≈ $98.75
Network Fee
3 KLV
USDT to KLV conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 23:09 UTC
1 USDT price
$1.00
1 KLV price
$0.00045284
1 USDT buys
2180.7719168 KLV
How to swap USDT to KLV
1
Copy your KLV address
Open your wallet's receive screen for KLV on KLV and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDT amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The KLV estimate under it already has the payout fee taken out.
3
Send USDT to the deposit address
Press Exchange Now. Your order page shows a one-time Avalanche C-Chain deposit address: send the amount you entered in one transaction. Send from a wallet set to the Avalanche C-Chain that holds enough AVAX on the C-Chain for gas; AVAX on the X-Chain or P-Chain cannot pay it.
4
Follow the order until KLV arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the KLV is in your wallet.
What the USDT to KLV swap costs
Two costs come out of the estimate before you see it: the exchange margin and the KLV network fee for your payout. You pay the C-Chain gas fee yourself, in AVAX: the gas charged, which is at least half the gas limit your wallet sets, times the base fee plus a tip, and both are burned. A token transfer runs the token's contract, so it uses more gas than a plain AVAX transfer, and that gas is paid in AVAX on the C-Chain.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the KLV you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDT to KLV at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Tether (AVAX C-CHAIN) (USDT)
Klever (KLV)
Network
Avalanche C-Chain
KLV
Type
ARC-20 token
Native coin
Contract
0x970223…F4A8c7
-
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 3.06 USDT
≈ 3 KLV
Route
Cross-chain: Avalanche C-Chain to KLV
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
6.87023 USDT
Account / ID
Not needed to start a swap
How long the USDT to KLV swap takes
The USDT to KLV swap is three waits in a row: the Avalanche C-Chain network confirms your deposit, the exchange partner swaps it, and the KLV network delivers the payout. A C-Chain transaction is final once Avalanche consensus accepts its block, in about a second, and accepted blocks are never reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.
2C-Chain consensus accepts the block
An accepted block is final. The node executes it after acceptance, so receipts and new balances appear once that is done.
3Exchange and KLV payout
The partner swaps the USDT and sends KLV. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout confirmed on KLV
Your wallet lists the KLV as received once KLV has confirmed the payout.
Your KLV address for the payout
A KLV receiving address is bech32 and starts with klv1. In our checks the swap form accepted klv1 bech32 addresses. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An address for KLV on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
A token contract address copied from an explorer instead of the address of your own wallet.
On the sending side, send USDT only on the Avalanche C-Chain, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary KLV transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to KLV and, for a token, that it displays this token.
If the address belongs to an exchange, check that the exchange accepts KLV on KLV, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a KLV block explorer.
If your USDT deposit is slow or stuck
Look up the transaction hash on Snowtrace. A deposit that stays pending usually has a max fee below the base fee bound of the next block, which rises while the C-Chain is busier than its target, or it waits behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Snowtrace marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDT to KLV swap
Your deposit is public on the Avalanche C-Chain: your sending address, the deposit address, the amount and the fee show on Snowtrace, and they stay there. The payout is recorded on KLV too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
If your AVAX sits on the X-Chain or P-Chain, move it to the C-Chain in your wallet first, because only C-Chain AVAX pays C-Chain gas.
Copy your KLV address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDT to KLV Frequently Asked Questions
How do I swap USDT to KLV?
Enter the USDT amount and your KLV address in the form at the top, press Exchange Now, and send USDT on the Avalanche C-Chain to the one-time deposit address on your order page. After the Avalanche C-Chain network confirms the deposit, the exchange partner sends KLV to your address. No account or email is needed.
How much KLV do I get for 1 USDT?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to KLV calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDT to KLV take?
There is no set time: the Avalanche C-Chain network confirms the deposit first, then the exchange partner swaps it and sends the KLV payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDT to KLV?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Tether to Klever without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the KLV I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.
How do I swap KLV back to USDT?
Use the KLV to USDT page, linked next to the swap form. It works the same way in reverse: paste an Avalanche C-Chain address, then send KLV to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.