Exchange Currencies Track Order Guides Telegram bot

Swap Tether USD (USDT) to Klever (KLV) with no sign-up

Enter the USDT amount, paste your KLV address from your own wallet, then send USDT on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends KLV straight to your address.

Swap KLV to USDT instead

Rate
1 USDT ≈ 2,254.343 KLV
Network Fee
-
Deposit Fee
-

Enter an address on the KLV network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDT to KLV exchange rate

The USDT to KLV rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in KLV after fees. It is worked out from the page's latest quote and carries that quote's time.

USDT to KLV Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDT TON Jetton
You get (estimate)
KLV KLV
225,434.301846 KLV
Rate
1 USDT ≈ 2,254.34 KLV
Value in USD
≈ $102.08
Network Fee
3 KLV

USDT to KLV conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 USDT≈ 225,434 KLV
500 USDT≈ 1,127,800 KLV
1,000 USDT≈ 2,255,757 KLV
5,000 USDT≈ 11,279,412 KLV
10,000 USDT≈ 22,558,981 KLV
50,000 USDT≈ 112,795,532 KLV
Live Market Snapshot Updated Nov 22, 2026 23:09 UTC
1 USDT price
$1.00
1 KLV price
$0.00045284
1 USDT buys
2254.34301846 KLV

How to swap USDT to KLV

  1. Copy your KLV address

    Open your wallet's receive screen for KLV on KLV and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDT amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The KLV estimate under it already has the payout fee taken out.

  3. Send USDT to the deposit address

    Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.

  4. Follow the order until KLV arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the KLV is in your wallet.

What the USDT to KLV swap costs

Two costs come out of the estimate before you see it: the exchange margin and the KLV network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as USDT also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the KLV you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USDT to KLV at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Tether USD (TON) (USDT) Klever (KLV)
Network TON KLV
Type Jetton token Native coin
Contract EQCxE6mU…Id_sDs -
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.06627 USDT ≈ 3 KLV
Route Cross-chain: TON to KLV
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.153404 USDT
Account / ID Not needed to start a swap

How long the USDT to KLV swap takes

The USDT to KLV swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the KLV network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.

  2. Masterchain block makes it final

    A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.

  3. Exchange and KLV payout

    The partner swaps the USDT and sends KLV. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on KLV

    Your wallet lists the KLV as received once KLV has confirmed the payout.

Your KLV address for the payout

A KLV receiving address is bech32 and starts with klv1. In our checks the swap form accepted klv1 bech32 addresses. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An address for KLV on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving KLV on KLV: address and memo

Memo or tagNot used on this network.
Block explorerkleverscan.org

Send USDT on the right network

On the sending side, send USDT only on TON, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the KLV arrives

The payout is an ordinary KLV transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to KLV and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts KLV on KLV, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a KLV block explorer.

If your USDT deposit is slow or stuck

A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.

If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDT to KLV swap

Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout is recorded on KLV too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
  • Copy your KLV address from the wallet's receive screen and compare its start and end after pasting.
  • If the order page shows a memo with the deposit address, add it when you send USDT, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDT to KLV Frequently Asked Questions

How do I swap USDT to KLV?

Enter the USDT amount and your KLV address in the form at the top, press Exchange Now, and send USDT on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends KLV to your address. No account or email is needed.

How much KLV do I get for 1 USDT?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to KLV calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does USDT to KLV take?

There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the KLV payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDT to KLV?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Tether USD to Klever without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap USDT to KLV?

For the deposit, only if the order page shows a memo next to the deposit address: your USDT must then carry it to be matched to your order.

Why is the KLV I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.

How do I swap KLV back to USDT?

Use the KLV to USDT page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send KLV to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps