Swap Bridged Tether USD (USDT) to USD.AI (CHIP) with no sign-up
Enter the USDT amount, paste your 0x address on Arbitrum One from your own wallet, then send USDT on Base to the one-time deposit address on your order page. Once the Base network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends CHIP on Arbitrum One straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDT to CHIP rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in CHIP after fees. It is worked out from the page's latest quote and carries that quote's time.
USDT to CHIP Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDTBaseERC-20
You get (estimate)
CHIPArbitrumERC-20
Rate
1 USDT ≈ 37.097 CHIP
Value in USD
≈ $99.68
Network Fee
2.4250487 CHIP
USDT to CHIP conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 10:43 UTC
1 USDT price
$1.00
1 CHIP price
$0.0269
1 USDT buys
37.09696172 CHIP
How to swap USDT to CHIP
1
Copy your CHIP address
Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDT amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The CHIP estimate under it already has the payout fee taken out.
3
Send USDT to the deposit address
Press Exchange Now. Your order page shows a one-time Base deposit address: send the amount you entered in one transaction. Send from a wallet switched to Base that holds some ETH on Base for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until CHIP arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the CHIP is in your wallet.
What the USDT to CHIP swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the Base network fee yourself, and Base charges it in ETH, for ETH and tokens alike: an execution fee on Base plus a fee for publishing the transaction to Ethereum, which your wallet estimates. Sending USDT on Base still costs gas, charged in ETH on Base, so most wallets need some ETH there as well as the USDT.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the CHIP you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDT to CHIP at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Bridged Tether USD (Base) (USDT)
USD.AI (CHIP)
Network
Base
Arbitrum One
Type
ERC-20 token
ERC-20 token
Contract
0xfde4C9…699bb2
0x0C1c1C…b71F6e
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.3 USDT
≈ 2.417 CHIP
Route
Cross-chain: Base to Arbitrum One
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.80131 USDT
Account / ID
Not needed to start a swap
How long the USDT to CHIP swap takes
The USDT to CHIP swap is three waits in a row: the Base network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. Base builds a block every 200 milliseconds, and your deposit gets its first confirmation when one includes it. It becomes final once the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.
2A Base block includes it
A maximum fee below the current base fee, or an older pending transaction from your account, can hold it back.
3Exchange and CHIP payout
The partner swaps the USDT and sends CHIP. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Arbitrum One
Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.
Your CHIP address for the payout
Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
On the sending side, send USDT only on Base, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the CHIP only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.
If your USDT deposit is slow or stuck
Look up the transaction hash on Basescan. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, OP Mainnet and other EVM networks, but the order waits for a transfer on Base only. While Base throttles transactions to manage its data posting to Ethereum, even ones with a high priority fee can be delayed.
If your wallet still shows the deposit as pending, its maximum fee may be below the current base fee, its priority fee may be too low while demand is high, or an older pending transaction from your address may be holding it back. If your wallet offers speed up, use it on the oldest pending one: it sends a replacement with the same nonce and a higher fee. The replacement has a new hash, so give that one to support.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDT to CHIP swap
Your deposit is public: the amount, your sending address and the deposit address show on Basescan, and the transaction is also published to Ethereum. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Base and keep some ETH on Base for gas before you send, even when the deposit is a token.
Copy your CHIP address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDT to CHIP Frequently Asked Questions
How do I swap USDT to CHIP?
Enter the USDT amount and your CHIP address in the form at the top, press Exchange Now, and send USDT on Base to the one-time deposit address on your order page. After the Base network confirms the deposit, the exchange partner sends CHIP on Arbitrum One to your address. No account or email is needed.
How much CHIP do I get for 1 USDT?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to CHIP calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDT to CHIP take?
There is no set time: the Base network confirms the deposit first, then the exchange partner swaps it and sends the CHIP payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDT to CHIP?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Bridged Tether USD to USD.AI without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the CHIP I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.
How do I swap CHIP back to USDT?
Use the CHIP to USDT page, linked next to the swap form. It works the same way in reverse: paste a Base address, then send CHIP to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.