Swap Bridged Tether USD (USDT) to Flare (FLR) with no sign-up
Enter the USDT amount, paste your Flare address from your own wallet, then send USDT on Base to the one-time deposit address on your order page. Once the Base network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends FLR straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDT to FLR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in FLR after fees. It is worked out from the page's latest quote and carries that quote's time.
USDT to FLR Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDTBaseERC-20
You get (estimate)
FLRFlare
Rate
1 USDT ≈ 192.253 FLR
Value in USD
≈ $100.20
Network Fee
0.105 FLR
USDT to FLR conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 10:24 UTC
1 USDT price
$1.00
1 FLR price
$0.00521204
1 USDT buys
192.25252935 FLR
How to swap USDT to FLR
1
Copy your FLR address
Open your wallet's receive screen for FLR on Flare and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDT amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The FLR estimate under it already has the payout fee taken out.
3
Send USDT to the deposit address
Press Exchange Now. Your order page shows a one-time Base deposit address: send the amount you entered in one transaction. Send from a wallet switched to Base that holds some ETH on Base for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until FLR arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the FLR is in your wallet.
What the USDT to FLR swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Flare network fee for your payout. You pay the Base network fee yourself, and Base charges it in ETH, for ETH and tokens alike: an execution fee on Base plus a fee for publishing the transaction to Ethereum, which your wallet estimates. Sending USDT on Base still costs gas, charged in ETH on Base, so most wallets need some ETH there as well as the USDT.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the FLR you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDT to FLR at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Bridged Tether USD (Base) (USDT)
Flare (FLR)
Network
Base
Flare
Type
ERC-20 token
Native coin
Contract
0xfde4C9…699bb2
-
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.3 USDT
≈ 0.105 FLR
Route
Cross-chain: Base to Flare
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.66266 USDT
Account / ID
Not needed to start a swap
How long the USDT to FLR swap takes
The USDT to FLR swap is three waits in a row: the Base network confirms your deposit, the exchange partner swaps it, and the Flare network delivers the payout. Base builds a block every 200 milliseconds, and your deposit gets its first confirmation when one includes it. It becomes final once the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.
2A Base block includes it
A maximum fee below the current base fee, or an older pending transaction from your account, can hold it back.
3Exchange and FLR payout
The partner swaps the USDT and sends FLR. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout confirmed on Flare
Your wallet lists the FLR as received once Flare has confirmed the payout.
Your FLR address for the payout
A Flare address is 0x followed by 40 hex characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An address for FLR on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
A token contract address copied from an explorer instead of the address of your own wallet.
On the sending side, send USDT only on Base, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary Flare transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Flare and, for a token, that it displays this token.
If the address belongs to an exchange, check that the exchange accepts FLR on Flare, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Flare block explorer.
If your USDT deposit is slow or stuck
Look up the transaction hash on Basescan. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, OP Mainnet and other EVM networks, but the order waits for a transfer on Base only. While Base throttles transactions to manage its data posting to Ethereum, even ones with a high priority fee can be delayed.
If your wallet still shows the deposit as pending, its maximum fee may be below the current base fee, its priority fee may be too low while demand is high, or an older pending transaction from your address may be holding it back. If your wallet offers speed up, use it on the oldest pending one: it sends a replacement with the same nonce and a higher fee. The replacement has a new hash, so give that one to support.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDT to FLR swap
Your deposit is public: the amount, your sending address and the deposit address show on Basescan, and the transaction is also published to Ethereum. The payout is recorded on Flare too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Base and keep some ETH on Base for gas before you send, even when the deposit is a token.
Copy your FLR address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDT to FLR Frequently Asked Questions
How do I swap USDT to FLR?
Enter the USDT amount and your FLR address in the form at the top, press Exchange Now, and send USDT on Base to the one-time deposit address on your order page. After the Base network confirms the deposit, the exchange partner sends FLR to your address. No account or email is needed.
How much FLR do I get for 1 USDT?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to FLR calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDT to FLR take?
There is no set time: the Base network confirms the deposit first, then the exchange partner swaps it and sends the FLR payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDT to FLR?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Bridged Tether USD to Flare without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the FLR I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.
How do I swap FLR back to USDT?
Use the FLR to USDT page, linked next to the swap form. It works the same way in reverse: paste a Base address, then send FLR to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.