Exchange Currencies Track Order Guides Telegram bot

Swap Bridged Tether USD (USDT) to Solstice (SLX) with no sign-up

Enter the USDT amount, paste a Solana wallet address from your own wallet, then send USDT on Base to the one-time deposit address on your order page. Once the Base network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends SLX on Solana straight to your address.

Swap SLX to USDT instead

Rate
1 USDT ≈ 32.8339 SLX
Network Fee
-
Deposit Fee
-

Enter an address on the Solana (SPL) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDT to SLX exchange rate

The USDT to SLX rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in SLX after fees. It is worked out from the page's latest quote and carries that quote's time.

USDT to SLX Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDT Base ERC-20
You get (estimate)
SLX Solana SPL
3,283.388674 SLX
Rate
1 USDT ≈ 32.8339 SLX
Value in USD
≈ $100.16
Network Fee
6.1006354 SLX

USDT to SLX conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 USDT≈ 3,283.39 SLX
500 USDT≈ 16,480.9 SLX
1,000 USDT≈ 32,977.9 SLX
5,000 USDT≈ 164,953 SLX
10,000 USDT≈ 329,923 SLX
50,000 USDT≈ 1,649,678 SLX
Live Market Snapshot Updated Nov 22, 2026 23:08 UTC
1 USDT price
$1.00
1 SLX price
$0.0305
1 USDT buys
32.83388674 SLX

How to swap USDT to SLX

  1. Copy your SLX address

    Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDT amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The SLX estimate under it already has the payout fee taken out.

  3. Send USDT to the deposit address

    Press Exchange Now. Your order page shows a one-time Base deposit address: send the amount you entered in one transaction. Send from a wallet switched to Base that holds some ETH on Base for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until SLX arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the SLX is in your wallet.

What the USDT to SLX swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. You pay the Base network fee yourself, and Base charges it in ETH, for ETH and tokens alike: an execution fee on Base plus a fee for publishing the transaction to Ethereum, which your wallet estimates. Sending USDT on Base still costs gas, charged in ETH on Base, so most wallets need some ETH there as well as the USDT.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the SLX you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USDT to SLX at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Bridged Tether USD (Base) (USDT) Solstice (SLX)
Network Base Solana
Type ERC-20 token SPL token
Contract 0xfde4C9…699bb2 SLXdx4BU…Edrfgq
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.3 USDT ≈ 6.071 SLX
Route Cross-chain: Base to Solana
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 1.059582 USDT
Account / ID Not needed to start a swap

How long the USDT to SLX swap takes

The USDT to SLX swap is three waits in a row: the Base network confirms your deposit, the exchange partner swaps it, and the Solana network delivers the payout. Base builds a block every 200 milliseconds, and your deposit gets its first confirmation when one includes it. It becomes final once the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.

  2. A Base block includes it

    A maximum fee below the current base fee, or an older pending transaction from your account, can hold it back.

  3. Exchange and SLX payout

    The partner swaps the USDT and sends SLX. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Solana

    Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the SLX under your address.

Your SLX address for the payout

A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
  • An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.

Receiving SLX on Solana: address and memo

Memo or tagNot used on this network.
Block explorersolscan.io

More about swapping on Solana

Send USDT on the right network

On the sending side, send USDT only on Base, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the SLX arrives

The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. SLX arrives in a token account tied to your wallet address; if you have never held SLX, the payout has to create that account, and your wallet needs no SOL to receive it.

If the address belongs to an exchange, check that it is the exchange's deposit address for SLX on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.

If your USDT deposit is slow or stuck

Look up the transaction hash on Basescan. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, OP Mainnet and other EVM networks, but the order waits for a transfer on Base only. While Base throttles transactions to manage its data posting to Ethereum, even ones with a high priority fee can be delayed.

If your wallet still shows the deposit as pending, its maximum fee may be below the current base fee, its priority fee may be too low while demand is high, or an older pending transaction from your address may be holding it back. If your wallet offers speed up, use it on the oldest pending one: it sends a replacement with the same nonce and a higher fee. The replacement has a new hash, so give that one to support.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDT to SLX swap

Your deposit is public: the amount, your sending address and the deposit address show on Basescan, and the transaction is also published to Ethereum. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Base and keep some ETH on Base for gas before you send, even when the deposit is a token.
  • Copy your SLX address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDT to SLX Frequently Asked Questions

How do I swap USDT to SLX?

Enter the USDT amount and your SLX address in the form at the top, press Exchange Now, and send USDT on Base to the one-time deposit address on your order page. After the Base network confirms the deposit, the exchange partner sends SLX on Solana to your address. No account or email is needed.

How much SLX do I get for 1 USDT?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to SLX calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does USDT to SLX take?

There is no set time: the Base network confirms the deposit first, then the exchange partner swaps it and sends the SLX payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDT to SLX?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Bridged Tether USD to Solstice without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the SLX I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.

How do I swap SLX back to USDT?

Use the SLX to USDT page, linked next to the swap form. It works the same way in reverse: paste a Base address, then send SLX to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps