Exchange Currencies Track Order Guides Telegram bot

Swap Tether (USDT) to Rain (RAIN) with no sign-up

Enter the USDT amount, paste your 0x address on Arbitrum One from your own wallet, then send USDT on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends RAIN on Arbitrum One straight to your address.

Swap RAIN to USDT instead

Rate
1 USDT ≈ 300.6747 RAIN
Network Fee
-
Deposit Fee
-

Enter an address on the Arbitrum One (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDT to RAIN exchange rate

The USDT to RAIN rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in RAIN after fees. It is worked out from the page's latest quote and carries that quote's time.

USDT to RAIN Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDT Ethereum ERC-20
You get (estimate)
RAIN Arbitrum ERC-20
30,067.4701529 RAIN
Rate
1 USDT ≈ 300.675 RAIN
Value in USD
≈ $100.60
Network Fee
19.7773974 RAIN

USDT to RAIN conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 USDT≈ 30,067.5 RAIN
500 USDT≈ 150,835 RAIN
1,000 USDT≈ 301,795 RAIN
5,000 USDT≈ 1,509,472 RAIN
10,000 USDT≈ 3,019,068 RAIN
50,000 USDT≈ 15,095,838 RAIN
Live Market Snapshot Updated Nov 22, 2026 21:02 UTC
1 USDT price
$1.00
1 RAIN price
$0.00334575
1 USDT buys
300.67470153 RAIN

How to swap USDT to RAIN

  1. Copy your RAIN address

    Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDT amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The RAIN estimate under it already has the payout fee taken out.

  3. Send USDT to the deposit address

    Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.

  4. Follow the order until RAIN arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the RAIN is in your wallet.

What the USDT to RAIN swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the RAIN you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USDT to RAIN at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Tether (ERC20) (USDT) RAIN
Network Ethereum Arbitrum One
Type ERC-20 token ERC-20 token
Contract 0xdAC17F…831ec7 0x251182…64099d
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.3411 USDT ≈ 16.95 RAIN
Route Cross-chain: Ethereum to Arbitrum One
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.907653 USDT
Account / ID Not needed to start a swap

How long the USDT to RAIN swap takes

The USDT to RAIN swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.

  2. Ethereum includes it in a block

    Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.

  3. Exchange and RAIN payout

    The partner swaps the USDT and sends RAIN. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Arbitrum One

    Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.

Your RAIN address for the payout

Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
  • An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving RAIN on Arbitrum One: address and memo

Memo or tagNot used on this network.
Block explorerarbiscan.io

More about swapping on Arbitrum One

Send USDT on the right network

On the sending side, send USDT only on Ethereum, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the RAIN arrives

The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the RAIN only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.

If your USDT deposit is slow or stuck

Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDT to RAIN swap

Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
  • Copy your RAIN address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDT to RAIN Frequently Asked Questions

How do I swap USDT to RAIN?

Enter the USDT amount and your RAIN address in the form at the top, press Exchange Now, and send USDT on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends RAIN on Arbitrum One to your address. No account or email is needed.

How much RAIN do I get for 1 USDT?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to RAIN calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does USDT to RAIN take?

There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the RAIN payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDT to RAIN?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Tether to Rain without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the RAIN I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.

How do I swap RAIN back to USDT?

Use the RAIN to USDT page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send RAIN to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps