Exchange Currencies Track Order Guides Telegram bot

Swap Stellar (XLM) to BitTorrent-New (BTTC) with no sign-up

Enter the XLM amount, paste a TRON address from your own wallet, then send XLM to the one-time deposit address on your order page. Once the Stellar network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BTTC on TRON straight to your address.

Swap BTTC to XLM instead

Network Fee
-
Deposit Fee
-

Enter an address on the TRON (TRC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

XLM to BTTC exchange rate

The XLM to BTTC rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

XLM to BTTC Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

XLM Stellar
You get (estimate)
BTTC TRON TRC-20
0
Rate
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 11:44 UTC
1 XLM price
$0.1329

How to swap XLM to BTTC

  1. Copy your BTTC address

    Open your TRON wallet's receive screen and copy your address, which starts with a capital T; the same address receives TRX and every TRC-20 token. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the XLM amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BTTC estimate under it already has the payout fee taken out.

  3. Send XLM to the deposit address

    Press Exchange Now. Your order page shows a one-time Stellar deposit address: send the amount you entered in one transaction. Send from a Stellar wallet whose balance covers the amount and still leaves the fee and the account's minimum balance in XLM. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.

  4. Follow the order until BTTC arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BTTC is in your wallet.

What the XLM to BTTC swap costs

Two costs come out of the estimate before you see it: the exchange margin and the TRON network fee for your payout. You pay the Stellar network fee yourself, in XLM: your wallet sets the most it will pay per operation, and when the network is quiet you are charged only the network minimum.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BTTC you get per XLM drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

XLM to BTTC at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Stellar (XLM) BitTorrent-New (TRC 20) (BTTC)
Network Stellar TRON
Type Native coin TRC-20 token
Contract - TAFjULxi…aqnVp4
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) None listed -
Route Cross-chain: Stellar to TRON
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 24.6705144 XLM
Account / ID Not needed to start a swap

How long the XLM to BTTC swap takes

The XLM to BTTC swap is three waits in a row: the Stellar network confirms your deposit, the exchange partner swaps it, and the TRON network delivers the payout. Stellar closes a new ledger every few seconds, and a payment in a closed ledger is final and cannot be reversed; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the XLM, and the order page moves from waiting to confirming once the deposit is found.

  2. Stellar closes the ledger

    In busy periods transactions with higher fee bids get into a ledger first, so a low bid can wait longer or be dropped.

  3. Exchange and BTTC payout

    The partner swaps the XLM and sends BTTC. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout solidified on TRON

    Your wallet shows the BTTC once a block includes it, and the payout is final when that block is solidified.

Your BTTC address for the payout

A TRON address is 34 characters long and starts with a capital T (Base58Check), so an 0x address will not work. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • A token's contract address instead of your wallet address: nobody holds a private key for a contract, so a payout sent there is usually lost.
  • An exchange address for a coin that exchange does not support on TRON: exchanges credit only the coins they list on TRON, so the payout may never reach your account.

Receiving BTTC on TRON: address and memo

Memo or tagNot used on this network.
Block explorertronscan.org

More about swapping on TRON

Which network your BTTC arrives on

This page pays BTTC on TRON. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.

After the BTTC arrives

The payout is an ordinary TRON transfer to your address, final once its block is solidified, which takes about a minute in normal operation. Moving it later costs Bandwidth, which the free daily allowance can cover, plus Energy for a token, which has no free allowance; when your resources fall short, the network burns TRX instead. A BTTC payout alone does not activate a new TRON address: the tokens arrive, but before moving them the address must be activated, which receiving TRX does, and have TRX or resources for the fee.

If the address belongs to an exchange, check that the exchange gives it for BTTC deposits on TRON and what its minimum deposit is; this listing sends no memo, so skip an exchange that asks for one. To check the payout yourself, open the payout hash from the order page in a TRON explorer such as Tronscan.

If your XLM deposit is slow or stuck

Look up the transaction hash on stellar.expert. In busy periods Stellar includes the highest fee bids first, so a transaction with a low bid can be pushed to later ledgers or dropped. A payment that would take the account's XLM below its minimum balance fails. A dropped or failed transaction delivers nothing to the deposit address, so wait until your wallet reports the first attempt as failed or expired before you send again.

If the order page showed a memo and your deposit went out without it, the payment reaches the deposit account but cannot be matched to your order on its own. Message support with the transaction hash instead of sending again. Some wallets refuse to send a payment without a memo to an account that marks memos as required; add the memo from the order page and send.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your XLM to BTTC swap

Your deposit is public: the sending account, the deposit account, the amount, any memo and the time stay in the Stellar ledger, where anyone can look them up on stellar.expert. The payout, its amount and your receiving address can be looked up by anyone on Tronscan, together with the TRX and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep enough XLM for the fee and the account's minimum balance after the deposit, because Stellar fails a payment that would go below the minimum.
  • Copy your BTTC address from the wallet's receive screen and compare its start and end after pasting.
  • Add the memo from the order page when you send XLM, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

XLM to BTTC Frequently Asked Questions

How do I swap XLM to BTTC?

Enter the XLM amount and your BTTC address in the form at the top, press Exchange Now, and send XLM to the one-time deposit address on your order page. After the Stellar network confirms the deposit, the exchange partner sends BTTC on TRON to your address. No account or email is needed.

How much BTTC do I get for 1 XLM?

Type 1 into the XLM to BTTC calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does XLM to BTTC take?

There is no set time: the Stellar network confirms the deposit first, then the exchange partner swaps it and sends the BTTC payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for XLM to BTTC?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Stellar to BitTorrent-New without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap XLM to BTTC?

For the deposit, yes: the order page shows a memo next to the deposit address, and your XLM must carry it to be matched to your order.

Can I receive BTTC on another network?

Yes, through a different entry in the coin list, since this page pays BTTC on TRON. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the BTTC I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XLM arrived than you entered.

How do I swap BTTC back to XLM?

Use the BTTC to XLM page, linked next to the swap form. It works the same way in reverse: paste a Stellar address, then send BTTC to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps