Exchange Currencies Track Order Guides Telegram bot

Swap Stellar (XLM) to Hamster Kombat (HMSTR) with no sign-up

Enter the XLM amount, paste a TON wallet address from your own wallet, then send XLM to the one-time deposit address on your order page. Once the Stellar network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HMSTR on TON straight to your address.

Swap HMSTR to XLM instead

Rate
1 XLM ≈ 843.9902 HMSTR
Network Fee
-
Deposit Fee
-

Enter an address on the TON (Jetton) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

XLM to HMSTR exchange rate

The XLM to HMSTR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several XLM amounts come to in HMSTR after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

XLM to HMSTR Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

XLM Stellar
You get (estimate)
HMSTR TON Jetton
675,192.1473114 HMSTR
Rate
1 XLM ≈ 843.99 HMSTR
Value in USD
≈ $103.32
Network Fee
379.4800687 HMSTR

XLM to HMSTR conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000 XLM≈ 844,085 HMSTR
5,000 XLM≈ 4,221,943 HMSTR
10,000 XLM≈ 8,444,266 HMSTR
50,000 XLM≈ 42,222,847 HMSTR
100,000 XLM≈ 84,446,074 HMSTR

XLM to HMSTR daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest1,031.6 HMSTR
Lowest851.915 HMSTR
Change, 6 days−13.44%
1,031.6 851.915
Nov 16, 2026Nov 22, 2026
DateRate
1 XLM ≈ 892.921 HMSTR
1 XLM ≈ 851.915 HMSTR
1 XLM ≈ 944.022 HMSTR
1 XLM ≈ 978.316 HMSTR
1 XLM ≈ 968.328 HMSTR
1 XLM ≈ 965.933 HMSTR
1 XLM ≈ 1,031.6 HMSTR
Live Market Snapshot Updated Nov 22, 2026 09:55 UTC
1 XLM price
$0.1321
1 HMSTR price
$0.00015302
1 XLM buys
843.99018414 HMSTR

How to swap XLM to HMSTR

  1. Copy your HMSTR address

    Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the XLM amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HMSTR estimate under it already has the payout fee taken out.

  3. Send XLM to the deposit address

    Press Exchange Now. Your order page shows a one-time Stellar deposit address: send the amount you entered in one transaction. Send from a Stellar wallet whose balance covers the amount and still leaves the fee and the account's minimum balance in XLM. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.

  4. Follow the order until HMSTR arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HMSTR is in your wallet.

What the XLM to HMSTR swap costs

Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Stellar network fee yourself, in XLM: your wallet sets the most it will pay per operation, and when the network is quiet you are charged only the network minimum.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HMSTR you get per XLM drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

XLM to HMSTR at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Stellar (XLM) Hamster Kombat (HMSTR)
Network Stellar TON
Type Native coin Jetton token
Contract - EQAJ8uWd…drPcUo
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) None listed ≈ 387.9 HMSTR
Route Cross-chain: Stellar to TON
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.9236322 XLM
Account / ID Not needed to start a swap

How long the XLM to HMSTR swap takes

The XLM to HMSTR swap is three waits in a row: the Stellar network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Stellar closes a new ledger every few seconds, and a payment in a closed ledger is final and cannot be reversed; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the XLM, and the order page moves from waiting to confirming once the deposit is found.

  2. Stellar closes the ledger

    In busy periods transactions with higher fee bids get into a ledger first, so a low bid can wait longer or be dropped.

  3. Exchange and HMSTR payout

    The partner swaps the XLM and sends HMSTR. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on TON

    Your wallet lists the HMSTR under your address once the transfer is in a block, and a masterchain block then makes it final.

Your HMSTR address for the payout

A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
  • An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
  • A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.

Receiving HMSTR on TON: address and memo

Memo or tagNot used on this network.
Block explorertonviewer.com

More about swapping on TON

After the HMSTR arrives

The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your HMSTR sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.

If the address belongs to an exchange, check that the exchange gives it for HMSTR deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for HMSTR, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.

If your XLM deposit is slow or stuck

Look up the transaction hash on stellar.expert. In busy periods Stellar includes the highest fee bids first, so a transaction with a low bid can be pushed to later ledgers or dropped. A payment that would take the account's XLM below its minimum balance fails. A dropped or failed transaction delivers nothing to the deposit address, so wait until your wallet reports the first attempt as failed or expired before you send again.

If the order page showed a memo and your deposit went out without it, the payment reaches the deposit account but cannot be matched to your order on its own. Message support with the transaction hash instead of sending again. Some wallets refuse to send a payment without a memo to an account that marks memos as required; add the memo from the order page and send.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your XLM to HMSTR swap

Your deposit is public: the sending account, the deposit account, the amount, any memo and the time stay in the Stellar ledger, where anyone can look them up on stellar.expert. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep enough XLM for the fee and the account's minimum balance after the deposit, because Stellar fails a payment that would go below the minimum.
  • Copy your HMSTR address from the wallet's receive screen and compare its start and end after pasting.
  • Add the memo from the order page when you send XLM, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

XLM to HMSTR Frequently Asked Questions

How do I swap XLM to HMSTR?

Enter the XLM amount and your HMSTR address in the form at the top, press Exchange Now, and send XLM to the one-time deposit address on your order page. After the Stellar network confirms the deposit, the exchange partner sends HMSTR on TON to your address. No account or email is needed.

How much HMSTR do I get for 1 XLM?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the XLM to HMSTR calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does XLM to HMSTR take?

There is no set time: the Stellar network confirms the deposit first, then the exchange partner swaps it and sends the HMSTR payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for XLM to HMSTR?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Stellar to Hamster Kombat without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap XLM to HMSTR?

For the deposit, yes: the order page shows a memo next to the deposit address, and your XLM must carry it to be matched to your order.

Why is the HMSTR I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XLM arrived than you entered.

How do I swap HMSTR back to XLM?

Use the HMSTR to XLM page, linked next to the swap form. It works the same way in reverse: paste a Stellar address, then send HMSTR to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps