Enter the XLM amount, paste a Kaspa address from your own wallet, then send XLM to the one-time deposit address on your order page. Once the Stellar network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends KAS straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The XLM to KAS rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several XLM amounts come to in KAS after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
XLM to KAS Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
XLMStellar
You get (estimate)
KASKaspa
Rate
1 XLM ≈ 4.93941 KAS
Value in USD
≈ $93.93
Network Fee
0.0034 KAS
XLM to KAS conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 11, 2026 to Nov 20, 2026.
Highest5.13041 KAS
Lowest5.02889 KAS
Change, 9 days−0.98%
Date
Rate
1 XLM ≈ 5.02889 KAS
1 XLM ≈ 5.05505 KAS
1 XLM ≈ 5.10154 KAS
1 XLM ≈ 5.11912 KAS
1 XLM ≈ 5.13041 KAS
1 XLM ≈ 5.0785 KAS
Live Market SnapshotUpdated Nov 20, 2026 01:51 UTC
1 XLM price
$0.1372
1 KAS price
$0.0272
1 XLM buys
4.93941435 KAS
How to swap XLM to KAS
1
Copy your KAS address
Open your Kaspa wallet's receive screen and copy the full address, including kaspa: at the start. Paste it into Recipient Address and compare the first and last characters.
2
Enter the XLM amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The KAS estimate under it already has the payout fee taken out.
3
Send XLM to the deposit address
Press Exchange Now. Your order page shows a one-time Stellar deposit address: send the amount you entered in one transaction. Send from a Stellar wallet whose balance covers the amount and still leaves the fee and the account's minimum balance in XLM. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.
4
Follow the order until KAS arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the KAS is in your wallet.
What the XLM to KAS swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Kaspa network fee for your payout. You pay the Stellar network fee yourself, in XLM: your wallet sets the most it will pay per operation, and when the network is quiet you are charged only the network minimum.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the KAS you get per XLM drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
XLM to KAS at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Stellar (XLM)
Kaspa (KAS)
Network
Stellar
Kaspa
Type
Native coin
Native coin
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 19, 2026)
None listed
≈ 0.0034 KAS
Route
Cross-chain: Stellar to Kaspa
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026)
2.151692 XLM
Account / ID
Not needed to start a swap
How long the XLM to KAS swap takes
The XLM to KAS swap is three waits in a row: the Stellar network confirms your deposit, the exchange partner swaps it, and the Kaspa network delivers the payout. Stellar closes a new ledger every few seconds, and a payment in a closed ledger is final and cannot be reversed; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the XLM, and the order page moves from waiting to confirming once the deposit is found.
2Stellar closes the ledger
In busy periods transactions with higher fee bids get into a ledger first, so a low bid can wait longer or be dropped.
3Exchange and KAS payout
The partner swaps the XLM and sends KAS. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout accepted on Kaspa
Wallets on the Rusty Kaspa framework show the payout as pending, then by default as confirmed once the DAA score has risen by 100.
Your KAS address for the payout
A Kaspa address starts with kaspa: and continues in lowercase letters and digits. Wallet addresses usually start with kaspa:q and script (multisig) addresses with kaspa:p; the swap form accepted both in our checks. It rejected the same address without the kaspa: prefix.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An 0x address for wrapped KAS on an EVM chain: this listing pays native KAS on the Kaspa network.
A testnet address that starts with kaspatest:, which belongs to a Kaspa test network.
An address from a wallet whose recovery phrase you have not written down.
The payout is an ordinary Kaspa transaction, and Kaspa targets ten blocks per second. Wallets built on the Rusty Kaspa wallet framework list it as pending at first and, by default, count it as confirmed once the network's DAA score, essentially a block count, is 100 higher than that of the block that accepted the payout.
If the address belongs to an exchange, check that it is the exchange's KAS deposit address on the Kaspa network, not one for a KAS token elsewhere, and what minimum it sets; exchanges credit a deposit only after their own number of confirmations. To check the payout yourself, open the payout hash from the order page in a Kaspa explorer such as explorer.kaspa.org.
If your XLM deposit is slow or stuck
Look up the transaction hash on stellar.expert. In busy periods Stellar includes the highest fee bids first, so a transaction with a low bid can be pushed to later ledgers or dropped. A payment that would take the account's XLM below its minimum balance fails. A dropped or failed transaction delivers nothing to the deposit address, so wait until your wallet reports the first attempt as failed or expired before you send again.
If the order page showed a memo and your deposit went out without it, the payment reaches the deposit account but cannot be matched to your order on its own. Message support with the transaction hash instead of sending again. Some wallets refuse to send a payment without a memo to an account that marks memos as required; add the memo from the order page and send.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your XLM to KAS swap
Your deposit is public: the sending account, the deposit account, the amount, any memo and the time stay in the Stellar ledger, where anyone can look them up on stellar.expert. The payout, its amount and your receiving address are visible to anyone who looks them up on a Kaspa explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Keep enough XLM for the fee and the account's minimum balance after the deposit, because Stellar fails a payment that would go below the minimum.
Copy your KAS address from the wallet's receive screen and compare its start and end after pasting.
Add the memo from the order page when you send XLM, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
XLM to KAS Frequently Asked Questions
How do I swap XLM to KAS?
Enter the XLM amount and your KAS address in the form at the top, press Exchange Now, and send XLM to the one-time deposit address on your order page. After the Stellar network confirms the deposit, the exchange partner sends KAS to your address. No account or email is needed.
How much KAS do I get for 1 XLM?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the XLM to KAS calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does XLM to KAS take?
There is no set time: the Stellar network confirms the deposit first, then the exchange partner swaps it and sends the KAS payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for XLM to KAS?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Stellar to Kaspa without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap XLM to KAS?
For the deposit, yes: the order page shows a memo next to the deposit address, and your XLM must carry it to be matched to your order.
Why is the KAS I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XLM arrived than you entered.
How do I swap KAS back to XLM?
Use the KAS to XLM page, linked next to the swap form. It works the same way in reverse: paste a Stellar address, then send KAS to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.