Swap Stellar (XLM) to Sapien (SAPIEN) with no sign-up
Enter the XLM amount, paste your 0x address on Base from your own wallet, then send XLM to the one-time deposit address on your order page. Once the Stellar network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends SAPIEN on Base straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The XLM to SAPIEN rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several XLM amounts come to in SAPIEN after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
XLM to SAPIEN Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
XLMStellar
You get (estimate)
SAPIENBaseERC-20
Rate
1 XLM ≈ 3.18428 SAPIEN
Value in USD
≈ $101.63
Network Fee
25.0743654 SAPIEN
XLM to SAPIEN conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest3.7936 SAPIEN
Lowest3.04186 SAPIEN
Change, 6 days−16.05%
3.79363.04186Nov 16, 2026Nov 22, 2026
Date
Rate
1 XLM ≈ 3.14227 SAPIEN
1 XLM ≈ 3.04186 SAPIEN
1 XLM ≈ 3.27643 SAPIEN
1 XLM ≈ 3.61252 SAPIEN
1 XLM ≈ 3.7936 SAPIEN
1 XLM ≈ 3.68082 SAPIEN
1 XLM ≈ 3.74292 SAPIEN
Live Market SnapshotUpdated Nov 22, 2026 19:42 UTC
1 XLM price
$0.1312
1 SAPIEN price
$0.0399
1 XLM buys
3.18428056 SAPIEN
How to swap XLM to SAPIEN
1
Copy your SAPIEN address
Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the XLM amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The SAPIEN estimate under it already has the payout fee taken out.
3
Send XLM to the deposit address
Press Exchange Now. Your order page shows a one-time Stellar deposit address: send the amount you entered in one transaction. Send from a Stellar wallet whose balance covers the amount and still leaves the fee and the account's minimum balance in XLM. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.
4
Follow the order until SAPIEN arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the SAPIEN is in your wallet.
What the XLM to SAPIEN swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the Stellar network fee yourself, in XLM: your wallet sets the most it will pay per operation, and when the network is quiet you are charged only the network minimum.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the SAPIEN you get per XLM drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
XLM to SAPIEN at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Stellar (XLM)
SAPIEN
Network
Stellar
Base
Type
Native coin
ERC-20 token
Contract
-
0xC72977…5814E3
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 22, 2026)
None listed
≈ 25.07 SAPIEN
Route
Cross-chain: Stellar to Base
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
16.7203933 XLM
Account / ID
Not needed to start a swap
How long the XLM to SAPIEN swap takes
The XLM to SAPIEN swap is three waits in a row: the Stellar network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. Stellar closes a new ledger every few seconds, and a payment in a closed ledger is final and cannot be reversed; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the XLM, and the order page moves from waiting to confirming once the deposit is found.
2Stellar closes the ledger
In busy periods transactions with higher fee bids get into a ledger first, so a low bid can wait longer or be dropped.
3Exchange and SAPIEN payout
The partner swaps the XLM and sends SAPIEN. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Base
Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.
Your SAPIEN address for the payout
Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the SAPIEN only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.
If your XLM deposit is slow or stuck
Look up the transaction hash on stellar.expert. In busy periods Stellar includes the highest fee bids first, so a transaction with a low bid can be pushed to later ledgers or dropped. A payment that would take the account's XLM below its minimum balance fails. A dropped or failed transaction delivers nothing to the deposit address, so wait until your wallet reports the first attempt as failed or expired before you send again.
If the order page showed a memo and your deposit went out without it, the payment reaches the deposit account but cannot be matched to your order on its own. Message support with the transaction hash instead of sending again. Some wallets refuse to send a payment without a memo to an account that marks memos as required; add the memo from the order page and send.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your XLM to SAPIEN swap
Your deposit is public: the sending account, the deposit account, the amount, any memo and the time stay in the Stellar ledger, where anyone can look them up on stellar.expert. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Keep enough XLM for the fee and the account's minimum balance after the deposit, because Stellar fails a payment that would go below the minimum.
Copy your SAPIEN address from the wallet's receive screen and compare its start and end after pasting.
Add the memo from the order page when you send XLM, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
XLM to SAPIEN Frequently Asked Questions
How do I swap XLM to SAPIEN?
Enter the XLM amount and your SAPIEN address in the form at the top, press Exchange Now, and send XLM to the one-time deposit address on your order page. After the Stellar network confirms the deposit, the exchange partner sends SAPIEN on Base to your address. No account or email is needed.
How much SAPIEN do I get for 1 XLM?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the XLM to SAPIEN calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does XLM to SAPIEN take?
There is no set time: the Stellar network confirms the deposit first, then the exchange partner swaps it and sends the SAPIEN payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for XLM to SAPIEN?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Stellar to Sapien without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap XLM to SAPIEN?
For the deposit, yes: the order page shows a memo next to the deposit address, and your XLM must carry it to be matched to your order.
Why is the SAPIEN I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XLM arrived than you entered.
How do I swap SAPIEN back to XLM?
Use the SAPIEN to XLM page, linked next to the swap form. It works the same way in reverse: paste a Stellar address, then send SAPIEN to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.