Exchange Currencies Track Order Guides Telegram bot

Swap Stellar (XLM) to Toshi (TOSHI) with no sign-up

Enter the XLM amount, paste your 0x address on Base from your own wallet, then send XLM to the one-time deposit address on your order page. Once the Stellar network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends TOSHI on Base straight to your address.

Swap TOSHI to XLM instead

Network Fee
-
Deposit Fee
-

Enter an address on the Base (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

XLM to TOSHI exchange rate

The XLM to TOSHI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

XLM to TOSHI Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

XLM Stellar
You get (estimate)
TOSHI Base ERC-20
0
Rate
-
Value in USD
-
Network Fee
-

XLM to TOSHI daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest1,808.08 TOSHI
Lowest1,641.27 TOSHI
Change, 6 days−7.32%
1,808.08 1,641.27
Nov 16, 2026Nov 22, 2026
DateRate
1 XLM ≈ 1,665.84 TOSHI
1 XLM ≈ 1,641.27 TOSHI
1 XLM ≈ 1,717.3 TOSHI
1 XLM ≈ 1,771.18 TOSHI
1 XLM ≈ 1,808.08 TOSHI
1 XLM ≈ 1,775.12 TOSHI
1 XLM ≈ 1,797.35 TOSHI
Live Market Snapshot Updated Nov 22, 2026 12:29 UTC
1 XLM price
$0.1332
1 TOSHI price
$0.0000796

How to swap XLM to TOSHI

  1. Copy your TOSHI address

    Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the XLM amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The TOSHI estimate under it already has the payout fee taken out.

  3. Send XLM to the deposit address

    Press Exchange Now. Your order page shows a one-time Stellar deposit address: send the amount you entered in one transaction. Send from a Stellar wallet whose balance covers the amount and still leaves the fee and the account's minimum balance in XLM. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.

  4. Follow the order until TOSHI arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the TOSHI is in your wallet.

What the XLM to TOSHI swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the Stellar network fee yourself, in XLM: your wallet sets the most it will pay per operation, and when the network is quiet you are charged only the network minimum.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the TOSHI you get per XLM drops near the minimum.

XLM to TOSHI at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Stellar (XLM) TOSHI
Network Stellar Base
Type Native coin ERC-20 token
Contract - 0xAC1Bd2…31B2B4
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) None listed -
Route Cross-chain: Stellar to Base
Rate Floating, estimate shown before you send
Account / ID Not needed to start a swap

How long the XLM to TOSHI swap takes

The XLM to TOSHI swap is three waits in a row: the Stellar network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. Stellar closes a new ledger every few seconds, and a payment in a closed ledger is final and cannot be reversed; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the XLM, and the order page moves from waiting to confirming once the deposit is found.

  2. Stellar closes the ledger

    In busy periods transactions with higher fee bids get into a ledger first, so a low bid can wait longer or be dropped.

  3. Exchange and TOSHI payout

    The partner swaps the XLM and sends TOSHI. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Base

    Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.

Your TOSHI address for the payout

Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
  • An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving TOSHI on Base: address and memo

Memo or tagNot used on this network.
Block explorerbasescan.org

More about swapping on Base

After the TOSHI arrives

The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the TOSHI only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.

If your XLM deposit is slow or stuck

Look up the transaction hash on stellar.expert. In busy periods Stellar includes the highest fee bids first, so a transaction with a low bid can be pushed to later ledgers or dropped. A payment that would take the account's XLM below its minimum balance fails. A dropped or failed transaction delivers nothing to the deposit address, so wait until your wallet reports the first attempt as failed or expired before you send again.

If the order page showed a memo and your deposit went out without it, the payment reaches the deposit account but cannot be matched to your order on its own. Message support with the transaction hash instead of sending again. Some wallets refuse to send a payment without a memo to an account that marks memos as required; add the memo from the order page and send.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your XLM to TOSHI swap

Your deposit is public: the sending account, the deposit account, the amount, any memo and the time stay in the Stellar ledger, where anyone can look them up on stellar.expert. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep enough XLM for the fee and the account's minimum balance after the deposit, because Stellar fails a payment that would go below the minimum.
  • Copy your TOSHI address from the wallet's receive screen and compare its start and end after pasting.
  • Add the memo from the order page when you send XLM, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

XLM to TOSHI Frequently Asked Questions

How do I swap XLM to TOSHI?

Enter the XLM amount and your TOSHI address in the form at the top, press Exchange Now, and send XLM to the one-time deposit address on your order page. After the Stellar network confirms the deposit, the exchange partner sends TOSHI on Base to your address. No account or email is needed.

How much TOSHI do I get for 1 XLM?

Type 1 into the XLM to TOSHI calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does XLM to TOSHI take?

There is no set time: the Stellar network confirms the deposit first, then the exchange partner swaps it and sends the TOSHI payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for XLM to TOSHI?

Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Stellar to Toshi without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap XLM to TOSHI?

For the deposit, yes: the order page shows a memo next to the deposit address, and your XLM must carry it to be matched to your order.

Why is the TOSHI I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XLM arrived than you entered.

How do I swap TOSHI back to XLM?

Use the TOSHI to XLM page, linked next to the swap form. It works the same way in reverse: paste a Stellar address, then send TOSHI to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees.

Guides for this swap

Related swaps

Popular swaps