Exchange Currencies Track Order Guides Telegram bot

Swap Stellar (XLM) to Wrapped Bitcoin (WBTC) with no sign-up

Enter the XLM amount, paste a Polygon PoS address from your own wallet, then send XLM to the one-time deposit address on your order page. Once the Stellar network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends WBTC on Polygon PoS straight to your address.

Swap WBTC to XLM instead

Rate
1 XLM ≈ 0.00000209986 WBTC
Network Fee
-
Deposit Fee
-

Enter an address on the Polygon PoS (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

XLM to WBTC exchange rate

The XLM to WBTC rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several XLM amounts come to in WBTC after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

XLM to WBTC Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

XLM Stellar
You get (estimate)
WBTC Polygon ERC-20
0.0014699 WBTC
Rate
1 XLM ≈ 0.00000209986 WBTC
Value in USD
≈ $93.02
Network Fee
0 WBTC

XLM to WBTC conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000 XLM≈ 0.00209986 WBTC
5,000 XLM≈ 0.0104993 WBTC
10,000 XLM≈ 0.0209986 WBTC
50,000 XLM≈ 0.104993 WBTC
100,000 XLM≈ 0.209986 WBTC

XLM to WBTC daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.

Highest0.00000222268 WBTC
Lowest0.00000212537 WBTC
Change, 4 days+0.61%
DateRate
1 XLM ≈ 0.00000217541 WBTC
1 XLM ≈ 0.0000021825 WBTC
1 XLM ≈ 0.00000222268 WBTC
1 XLM ≈ 0.00000212537 WBTC
1 XLM ≈ 0.00000216228 WBTC
Live Market Snapshot Updated Nov 20, 2026 02:14 UTC
1 XLM price
$0.1356
1 WBTC price
$63,281.53
1 XLM buys
0.0000021 WBTC

How to swap XLM to WBTC

  1. Copy your WBTC address

    Open your wallet with Polygon PoS selected, which wallets may list as Polygon or Polygon Mainnet, and copy your 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the XLM amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The WBTC estimate under it already has the payout fee taken out.

  3. Send XLM to the deposit address

    Press Exchange Now. Your order page shows a one-time Stellar deposit address: send the amount you entered in one transaction. Send from a Stellar wallet whose balance covers the amount and still leaves the fee and the account's minimum balance in XLM. Add the memo shown on the order page, because a deposit without it cannot be matched to your order.

  4. Follow the order until WBTC arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the WBTC is in your wallet.

What the XLM to WBTC swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Polygon PoS network fee for your payout. You pay the Stellar network fee yourself, in XLM: your wallet sets the most it will pay per operation, and when the network is quiet you are charged only the network minimum.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the WBTC you get per XLM drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

XLM to WBTC at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Stellar (XLM) Wrapped Bitcoin (Polygon) (WBTC)
Network Stellar Polygon PoS
Type Native coin ERC-20 token
Contract - 0x1BFD67…D9BfD6
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 19, 2026) None listed None listed
Route Cross-chain: Stellar to Polygon PoS
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026) 0.0917513 XLM
Account / ID Not needed to start a swap

How long the XLM to WBTC swap takes

The XLM to WBTC swap is three waits in a row: the Stellar network confirms your deposit, the exchange partner swaps it, and the Polygon PoS network delivers the payout. Stellar closes a new ledger every few seconds, and a payment in a closed ledger is final and cannot be reversed; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the XLM, and the order page moves from waiting to confirming once the deposit is found.

  2. Stellar closes the ledger

    In busy periods transactions with higher fee bids get into a ledger first, so a low bid can wait longer or be dropped.

  3. Exchange and WBTC payout

    The partner swaps the XLM and sends WBTC. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Polygon PoS

    Your wallet shows the payout once a block includes it, and a milestone then finalizes that block for good.

Your WBTC address for the payout

Polygon PoS uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for WBTC on Ethereum or another network: the 0x address can look the same, but the exchange may not credit a Polygon PoS payout.
  • A token contract address copied from PolygonScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on Polygon PoS, where a payout stays stuck unless the wallet can be recreated there.

Receiving WBTC on Polygon PoS: address and memo

Memo or tagNot used on this network.
Block explorerpolygonscan.com

More about swapping on Polygon PoS

Which network your WBTC arrives on

This page pays WBTC on Polygon PoS. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.

After the WBTC arrives

The payout shows in your wallet once a block includes it, and a later milestone finalizes that block, after which it cannot be reorganized. You need no POL to receive the payout, because the sender pays the gas. A wallet that still shows MATIC as the network's own coin is showing the same POL balance under the old symbol. Moving the WBTC later costs gas paid in POL, so keep some POL at that address. Some tokens have two versions on Polygon PoS with different contracts, such as native USDC and bridged USDC.e, and exchanges may accept only one.

If the address belongs to an exchange, check that the exchange credits WBTC on Polygon PoS, not only on Ethereum, and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a Polygon PoS explorer such as PolygonScan.

If your XLM deposit is slow or stuck

Look up the transaction hash on stellar.expert. In busy periods Stellar includes the highest fee bids first, so a transaction with a low bid can be pushed to later ledgers or dropped. A payment that would take the account's XLM below its minimum balance fails. A dropped or failed transaction delivers nothing to the deposit address, so wait until your wallet reports the first attempt as failed or expired before you send again.

If the order page showed a memo and your deposit went out without it, the payment reaches the deposit account but cannot be matched to your order on its own. Message support with the transaction hash instead of sending again. Some wallets refuse to send a payment without a memo to an account that marks memos as required; add the memo from the order page and send.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your XLM to WBTC swap

Your deposit is public: the sending account, the deposit account, the amount, any memo and the time stay in the Stellar ledger, where anyone can look them up on stellar.expert. The payout, its amount and your 0x address are public on PolygonScan, and so is everything that address does later on Polygon PoS. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep enough XLM for the fee and the account's minimum balance after the deposit, because Stellar fails a payment that would go below the minimum.
  • Copy your WBTC address from the wallet's receive screen and compare its start and end after pasting.
  • Add the memo from the order page when you send XLM, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

XLM to WBTC Frequently Asked Questions

How do I swap XLM to WBTC?

Enter the XLM amount and your WBTC address in the form at the top, press Exchange Now, and send XLM to the one-time deposit address on your order page. After the Stellar network confirms the deposit, the exchange partner sends WBTC on Polygon PoS to your address. No account or email is needed.

How much WBTC do I get for 1 XLM?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the XLM to WBTC calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does XLM to WBTC take?

There is no set time: the Stellar network confirms the deposit first, then the exchange partner swaps it and sends the WBTC payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for XLM to WBTC?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Stellar to Wrapped Bitcoin without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap XLM to WBTC?

For the deposit, yes: the order page shows a memo next to the deposit address, and your XLM must carry it to be matched to your order.

Can I receive WBTC on another network?

Yes, through a different entry in the coin list, since this page pays WBTC on Polygon PoS. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the WBTC I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XLM arrived than you entered.

How do I swap WBTC back to XLM?

Use the WBTC to XLM page, linked next to the swap form. It works the same way in reverse: paste a Stellar address, then send WBTC to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps